Lobitz, L.; Hahn, A.; Vogt, D.; Luplow, T.; Michalowski, P.; Heimbs, S.; Garnweitner, G. Conceptual Challenges for Crashworthy Battery-Electric Commercial Aircraft – A Review. AIAA SCITECH 2024 Forum, AIAA 2024-2156. DOI: https://doi.org/10.2514/6.2024-2156
Gottschalk, L.; Müller, J.; Schoo, A.; Baasch, E.; Kwade, A. (2024): "Spherical Graphite Anodes: Influence of Particle Size Distribution and Multilayer Structuring in Lithium-Ion Battery Cells" In: Batteries. DOI: https://doi.org/10.3390/batteries10020040
N. L. Grotkopp, M. Horst, G. Garnweitner, Effect of ether medium in LiTFSI and LiFSI‐based liquid electrolytes for lithium–sulfur batteries, Battery Energy 2024, No. 20240002, https://doi.org/10.1002/bte2.20240002
C. Müller, C. A. Heck, L. Stephan, M. Paschetag, S. Scholl: Precipitation of Terephthalic Acid from Alkaline Solution: Influence of Temperature and Precipitation Acid, Ind. Eng. Chem. Res. (2023) Link: https://doi.org/10.1021/acs.iecr.2c04451
Alexander Schoo, Robin Moschner, Jens Hülsmann u. Arno Kwade: Coating Defects of Lithium-Ion Battery Electrodes and Their Inline Detection and Tracking in Batteries 2023, 9(2), 111; https://doi.org/10.3390/batteries9020111
Heck, C. A.; Huttner, F.; Mayer, J. K.; Fromm, O.; Börner, M.; Heckmann, T.; Scharfer, P.; Schabel, W.; Winter, M.; Kwade, A.: Production of nickel-rich cathodes for lithium-ion batteries from lab to pilot scale under investigation of the process atmosphere, Energy Technology, 2200945 (2023) Link: https://doi.org/10.1002/ente.202200945
M. Batzer, D. Gundlach, P. Michalowski, A. Kwade, Scalable Production of Separator and Cathode Suspensions via Extrusion for Sulfidic Solid-State Batteries, ChemElectroChem, 2023, https://doi.org/10.1002/celc.202300452
Hahn, A.; Doose, S.; Saathoff, D.; Kwade, A. Effect of External Compression on the Thermal Runaway of Lithium-Ion Battery Cells during Crush Tests: Insights for Improved Safety Assessment. Batteries 2023, 9, 404. DOI: https://doi.org/10.3390/batteries9080404
Doose, S.; Hahn, A.; Fischer, S.; Müller, J.; Haselrieder,W.; Kwade, A. Comparison of the consequences of state of charge and state of health on the thermal runaway behavior of lithium ion batteries. J. Energy Storage 2023, 62, 106837. DOI: https://doi.org/10.1016/j.est.2023.106837
A. Jean-Fulcrand, E. J. Jeon, S. Karimpour, G. Garnweitner, "Cross-Linked Solid Polymer-Based Catholyte for Solid-State Lithium-Sulfur Batteries", Batteries 2023, 9(7), 341; https://doi.org/10.3390/batteries9070341
Sherif Okeil, Julian Ungerer, Hermann Nirschl, Georg Garnweitner, Synthesis of Anisotropic Metal Oxide Nanoparticles via Non‑Aqueous and Non-Hydrolytic Routes, KONA Powder and Particle Journal, Article ID 2024014, Advance online publication August 31, 2023, https://doi.org/10.14356/kona.2024014
Schrader, M., Schrinner, K., Polomsky, L., Ivanov, D., Kampen, I., Schilde, C. Quantification and modeling of macroparticle-induced mechanical stress for varying shake flask cultivation conditions. Front Bioeng Biotechnol 11. doi: 10.3389/fbioe.2023.1254136
Dinius, A., Schrinner, K., Schrader, M., Kozanecka, Z. J., Brauns, H., Klose, L. Morphology engineering for novel antibiotics: Effect of glass microparticles and soy lecithin on rebeccamycin production and cellular morphology of filamentous actinomycete Lentzea aerocolonigenes. Front Bioeng Biotechnol 11, 1171055. doi: 10.3389/fbioe.2023.1171055
Schrader, M., Schrinner, K., Polomsky, L., Ivanov, D., Kampen, I., Schilde, C. Quantification and modeling of macroparticle-induced mechanical stress for varying shake flask cultivation conditions. Front Bioeng Biotechnol 11. doi: 10.3389/fbioe.2023.1254136
Heyn, T. R., Schrader, M., Kampen, I., Kwade, A., Schwarz, K., and Keppler, J. K. Glass beads increase the formation kinetics of beta-lactoglobulin amyloid fibrils. Food Hydrocolloids, 108511. doi: 10.1016/j.foodhyd.2023.108511
Vorländer, K.; Bahlmann, L.; Kwade, A.; Finke, J. H.; Kampen, I. Effect of Process Parameters, Protectants and Carrier Materials on the Survival of Yeast Cells during Fluidized Bed Granulation for Tableting. Pharmaceutics 2023, 15 (3), 884. DOI: 10.3390/pharmaceutics15030884.
Vorländer, K.; Bahlmann, L.; Kwade, A.; Finke, J. H.; Kampen, I. Tableting of Fluidized Bed Granules Containing Living Microorganisms. European journal of pharmaceutics and biopharmaceutics 2023, 187, 57-67. DOI: 10.1016/j.ejpb.2023.03.011.
Vorländer, K.; Bahlmann, L.; Kwade, A.; Finke, J. H.; Kampen, I. Influence of compression kinetics during tableting of fluidized bed-granulated microorganisms on microbiological and physical-mechanical tablet properties. European journal of pharmaceutics and biopharmaceutics 2023, 188, 161-169. DOI: 10.1016/j.ejpb.2023.05.012.
Vorländer, K.; Pramann, P.; Kwade, A.; Finke, J. H.; Kampen, I. Process and formulation parameters influencing the survival of Saccharomyces cerevisiae during spray drying and tableting. In: International journal of pharmaceutics 2023, 642, 123100. DOI: 10.1016/j.ijpharm.2023.123100.
Gottschalk, L.; Oertel, C.; Strzelczyk, N.; Müller, J.; Krüger, J.; Haselrieder, W.; Kwade, A. (2022): Improving the Performance of Lithium-Ion Batteries Using a Two-Layer, Hard Carbon-Containing Silicon Anode for Use in High-Energy Electrodes. In: Energy Technology. DOI: https://doi.org/10.1002/ente.202200858
Strzelczyk, N.; Gottschalk, L.; Müller, J.; Kwade, A. (2022): The Influence of Calendering on the Fast Charging Performance and Lithium Plating of Hard Carbon Blend Anodes. In: Energy Technology. DOI: https://doi.org/10.1002/ente.202200865
N. L. Grotkopp, M. Horst, M. Batzer, G. Garnweitner, A. Jean-Fulcrand, Flexible Freestanding Thin Polyethylene Oxide-Based Film as Artificial Solid-Electrolyte Interface to Protect Lithium-Metal in Lithium-Sulfur Batteries, Advanced Energy and Sustainability Research, 2022, https://doi.org/10.1002/aesr.202200146
Marcel Weber, Robin Moschner, Arno Kwade: Modifying the Network Structures of High Energy Anodes for Lithium-Ion Batteries through Intensive Dry Mixing, Energy Technology, 2022 https://doi.org/10.1002/ente.202200852
Scheffler, S.; Jagau, R.; Müller, N.; Diener, A.; Kwade, A. Calendering of Silicon-Containing Electrodes and Their Influence on the Mechanical and Electrochemical Properties. Batteries 2022, 8, 46. https://doi.org/10.3390/batteries8050046
Jagau, R.; Huttner, F.; Mayer, J. K.; Cavers, H.; Scheffler, S.; Brokmann, J.; Kwade, A.: Influence of Different Alginate and Carboxymethyl Cellulose Binders on Moisture Content, Electrode Structure, and Electrochemical Properties of Graphite-Based Anodes for Lithium-Ion Batteries, Energy Technology, 2200871 (2022) Link: https://onlinelibrary.wiley.com/doi/epdf/10.1002/ente.202200871
Von Horstig, M.-W.; Schoo, A.; Loelheoffel, T.; Mayer, J. K.; Kwade, A.; A Perspective on Innovative Drying Methods for Energy-Efficient Solvent-Based Production of Lithium-Ion Battery Electrodes; J. Energy Technol. (2022) Direktzugriff: https://onlinelibrary.wiley.com/doi/epdf/10.1002/ente.202200689
M. Batzer, C. Heck, Dr. P. Michalowski, Prof. Dr. A. Kwade Current Status of Formulations and Scalable Processes for Producing Sulfidic Solid-State Batteries, Chemistry Europe, 2022 , link
Mayer, J. K. and Huttner, F.; Heck, C. A.; Steckermeier, D.; von Horstig, M. W.; Kwade, A.: Investigation of Moisture Content, Structural and Electrochemical Properties of Nickel-Rich NCM Based Cathodes Processed at Ambient Atmosphere, Journal of the Electrochemical Society, 169, 060512 (2022)
Link: https://iopscience.iop.org/article/10.1149/1945-7111/ac7358/meta
M.Batzer, K.Voges, W.Wang, P.Michalowski, A.Kwade: Systematic evaluation of materials and recipe for scalable processing of sulfide-based solid-state batteries, Materials Today Communications Vol 30, 2022 link
Doose, S.; Hahn, A.; Bredekamp, M.; Haselrieder, W.; Kwade, A. Scaling Methodology to Describe the Capacity Dependent Responses During Thermal Runaway of Lithium-Ion Batteries. Batter. Supercaps 2022, 5, e202200060. DOI: https://doi.org/10.1002/batt.202200060
S. Neumann, A. Rezvani, M. Barasinski, G. Garnweitner, D. Segets, D. Rafaja "Statistical Determination of Atomic-Scale Characteristics of Au Nanocrystals Based on Correlative Multiscale Transmission Electron Microscopy", Microscopy and Microanalysis, 2022, https://doi.org/10.1093/micmic/ozac027
N. L. Grotkopp, M. Horst, M. Batzer, G. Garnweitner, A. Jean-Fulcrand, Flexible Freestanding Thin Polyethylene Oxide-Based Film as Artificial Solid-Electrolyte Interface to Protect Lithium-Metal in Lithium-Sulfur Batteries, Advanced Energy and Sustainability Research, 2022, https://doi.org/10.1002/aesr.202200146
M. Barasinski, J. Hilbig, S. Neumann, D. Rafaja, G. Garnweitner, "Simple model of the electrophoretic migration of spherical and rod-shaped Au nanoparticles in gels with varied mesh sizes", Colloids and Surfaces A, 2022, 651, 129716 https://doi.org/10.1016/j.colsurfa.2022.129716
M. Barasinski, G.R. Pesch, G. Garnweitner, "Electrophoresis and Dielectrophoresis", In: Particle Separation Techniques - Fundamentals, Instrumentation, and Selected Applications, 1st ed., (Ed. Contado, C.), Elsevier Science, 2022, ISBN: 9780323854870, https://doi.org/10.1016/B978-0-323-85486-3.00009-3
M. Barasinski, G. Garnweitner, „Separation of Nano- and Submicron Particles by Preparative Gel Electrophoresis”, Chemie-Ingenieur-Technik, 2022, 95. https://doi.org/10.1002/cite.202200134
E. J. Jeon, A. Jean-Fulcrand, A. Kwade, G. Garnweitner, “A room-temperature high performance all-solid-state lithium-sulfur battery enabled by a cross-linked copolymer@ceramic hybrid solid electrolyte”, Nano Energy, 2022, 104, 107912 link
Finke, B., Schrader, M., Kwade, A., and Schilde, C. (2022). Stress- and process model for dispersing of nanoparticulate suspensions in laminar shear flow. Advanced Powder Technology 33, 103574. doi: 10.1016/j.apt.2022.103574
Huttner, F.; Marth, A.; Eser, J. C.; Heckmann, T.; Mohacsi, J.; Mayer, J. K.; Scharfer, P.; Schabel, W.; Kwade, A.: Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries & Supercaps, 8, 1499 (2021)
Link: https://chemistry-europe.onlinelibrary.wiley.com/doi/full/10.1002/batt.202100088
F. Huttner, A. Diener, T. Heckmann, J. C. Eser, T. Abali, J. K. Mayer, P. Scharfer, W. Schabel, A. Kwade, Increased Moisture Uptake of NCM622 Cathodes after Calendering due to Particle Breakage, Journal of the Electrochemical Society (2021) link
A. Zarinwall, T. Waniek, R. Saadat, U. Braun, H. Sturm, G. Garnweitner
Comprehensive Characterization of APTES Surface Modifications of Hydrous Boehmite Nanoparticles
Langmuir, 2021, Volume 37, Issue 1, 171-179
P. Sharma, M. Minakshi, J. Whale, A. Jean-Fulcrand, G. Garnweitner
Effect of the Anionic Counterpart: Molybdate vs. Tungstate in Energy Storage for Pseudo-Capacitor Applications
Nanomaterials, 2201, Volume 11, No. 580
V. Maurer, S. Altin, D. Ag Seleci, A. Zarinwall, B. Temel, P. M. Vogt, S. Strauß, F. Stahl, T. Scheper, V. Bucan, G. Garnweitner
In-vitro application of magnetic hybrid niosomes: Targeted siRNA-delivery for enhanced breast cancer therapy
Pharmaceutics, 2021, Volume 13, No. 394
A. Zarinwall, M. Asadian-Birjand, D. Ag Seleci, V. Maurer, A. Trautner, G. Garnweitner, H. Fuchs
Magnetic Nanoparticle-Based Dianthin Targeting for Controlled Drug Release Using the Endosomal Escape Enhancer SO1861
Nanomaterials, 2021, Volume 11, No. 1057
D. Ag Seleci, V. Maurer, F. B. Barlas, J. C. Porsiel, B. Temel, E. Ceylan, S. Timur, F. Stahl, T. Scheper, G. Garnweitner
Transferrin-decorated niosomes with integrated InP/ZnS quantum dots and magnetic iron oxide nanoparticles: dual targeting and imaging of glioma
International Journal of Molecular Sciences, 2021, Volume 22, No. 4556
M. Görke, G. Garnweitner
Crystal engineering of nanomaterials: Current insights and prospects
CrystEngComm, 2021, Volume 23, Issue 45, 7874-7875, online, DOI 10.1039/d1ce00601k
N. Vasic, J. Steinmetz, M. Görke, M. Sinapius, C. Hühne, G. Garnweitner
Phase transitions of polarised PVDF films in a standard curing process for composites
Polymers, 2021, 13, No. 3900
G. Garnweitner, K. Lee, D. Xue
Crystal growth of nanomaterials
CrystEngComm, 2021, Volume 23, Issue 45, 7916-7927, online, DOI 10.1039/d1ce90142g
Baasch, Julian; Windisch, Lisa; Koch, Frank; Linke, Stefan; Stoll, Enrico; Schilde, Carsten (2021): Regolith as substitute mold material for aluminum casting on the Moon. In: Acta Astronautica. DOI: 10.1016/j.actaastro.2021.01.045.
Düerkop, Dennis; Widdecke, Hartmut; Schilde, Carsten; Kunz, Ulrich; Schmiemann, Achim (2021): Polymer Membranes for All-Vanadium Redox Flow Batteries: A Review. In: Membranes 11 (3), S. 214. DOI: 10.3390/membranes11030214;
Finke, Benedikt; Sangrós Giménez, Clara; Kwade, Arno; Schilde, Carsten (2021): Viscosity Model for Nanoparticulate Suspensions Based on Surface Interactions. In: Materials 14 (11), S. 2752. DOI: 10.3390/ma14112752
Fragnière, Greta; Naumann, Aleksandra; Schrader, Marcel; Kwade, Arno; Schilde, Carsten (2021): Grinding Media Motion and Collisions in Different Zones of Stirred Media Mills. In: Minerals 11 (2), S. 185. DOI: 10.3390/min11020185.
Giannis, Kostas; Schilde, Carsten; Finke, Jan Henrik; Kwade, Arno; Celigueta, M. A.; Taghizadeh, K.; Luding, Stefan (2021): Stress based multi-contact model for discrete-element simulations. In: Granular Matter 23 (2), S. 531. DOI: 10.1007/s10035-020-01060-8;
Kubiak, Marta; Mayer, Janine; Kampen, Ingo; Schilde, Carsten; Biedendieck, Rebekka (2021): Structure-Properties Correlation of Cross-Linked Penicillin G Acylase Crystals. In: Crystals 11 (4), S. 451. DOI: 10.3390/cryst11040451
Thon, Christoph; Finke, Benedikt; Kwade, Arno; Schilde, Carsten (2021): Artificial Intelligence in Process Engineering. In: Advanced Intelligent Systems. DOI: 10.1002/aisy.202000261.
Laible, A. R., Dinius, A., Schrader, M., Krull, R., Kwade, A., Briesen, H. Effects and interactions of metal oxides in microparticle‐enhanced cultivation of filamentous microorganisms. Engineering in Life Sciences. doi: 10.1002/elsc.202100075
Fragnière, G., Naumann, A., Schrader, M., Kwade, A., and Schilde, C. Grinding media motion and collisions in different zones of stirred media mills. Minerals 11, 185. doi: 10.3390/min11020185
Heck, C. A.; von Horstig, M.; Huttner, F.; Mayer, J.; Haselrieder, W.; Kwade, A.: Review - Knowledge-Based Process Design for High Quality Production of NCM811 Cathodes, Journal of the Electrochemical Society, 167, 160521 (2020)
A. Kwade: Advances in Battery Cell Production Energy Technology,Volume 8, Issue 2
S. Voigt, F. Sträubig, S. Palis, A. Kwade, C. Knaust: CFD-Analysis of the Sensible Enthalpy Rise Approach to Determine the Heat Release Rate of Electric-Vehicle-Scale Lithium-Ion Battery Fires
Fire Safety Journal, Volume 114
C. Sangrós Giménez, L. Helmbers, C. Schilde, A. Diener, A. Kwade: Modeling the Electrical Conductive Paths within All-Solid-State Battery Electrodes Chemical Engineering and Technology, Volume 43, Issue 5, 819-829
L. Froböse, L. Groffmann, F. Monsees, L. Helmbers, T. Loellhoeffel, A. Kwade: Enhancing the Lithium Ion Conductivity of an All Solid-State Electrolyte via Dry and Solvent-Free Scalable Series Production Process Journal of the Electrochemical Society, Volume 167, Issue 2
R. F. Samsinger, S. O. Schopf, J. Schuhmacher, P. Treis, M. Schneider, A. Roters and A. Kwade: Influence of the Processing on the Ionic Conductivity of Solid-State Hybrid Electrolytes Based on Glass-Ceramic Particles Dispersed in PEO with LiTFSI Journal of The Electrochemical Society, Volume 167, Number 12
V. Maurer, C. Frank, J. C. Porsiel, S. Zellmer, G. Garnweitner, R. Stosch
Step-by-step monitoring of a magnetic and SERS-active immunosensor assembly for purification and detection of tau protein
Journal of Biophotonics, 2020, Volume 13, No. e201960090
M. Minakshi, D. R. G. Mitchell, R. T. Jones, N. C. Pramanik, A. Jean-Fulcrand, G. Garnweitner
A Hybrid Electrochemical Energy Storage Device Using Sustainable Electrode Materials
ChemistrySelect, 2020, Volume 5, 1597-1606
T. Preller, S. Knickmeier, D. Menzel, B. Temel, G. Garnweitner
Exchange Bias in FePt-FePt3 Thin Films by Controlled Phase Transition of Blended Nanoparticle Building Blocks
Langmuir, 2020, Volume 36, Issue 8, 2093-2101
M. Barasinski, G. Garnweitner
Restricted and Unrestricted Migration Mechanisms of Silica Nanoparticles in Agarose Gels and Their Utilization for the Separation of Binary Mixtures
Journal of Physical Chemistry C, 2020, Volume 124, Issue 9, 5157-5166 https://doi.org/10.1021/acs.jpcc.9b10644
G. Garnweitner, D. Xue
Crystal Engineering for Electrochemical Applications
CrystEngComm, 2020, Volume 22, Issue 9, 1498-1499
J. Ungerer, A.-K. Thurm, G. Garnweitner, H. Nirschl
Formation of Aluminum-Doped Zinc Oxide Nanocrystals via the Benzylamine Route at Low Reaction Kinetics
Chemical Engineering and Technology, 2020, Volume 43, Issue 5, 797-803
J. Ungerer, A.-K. Thurm, G. Garnweitner, H. Nirschl
Evaluation of the Dispersion Stability of AZO Mesocrystals for Their Processing into Functional Thin Films Using Small Angle X-Ray Scattering
Crystals, 2020, Volume 10, No. 374
T. Preller, D. Menzel, S. Knickmeier, G. Garnweitner
Herstellung von Nanokomposit‐Dünnschichten mit speziellen magnetischen Eigenschaften aus nanopartikulären Bausteinen
Chemie Ingenieur Technik, 2020, Volume 92, Issue 11, 1810-1820
D.Ivanov, S.Becker, Z.Lu, R.von Klitzing, C.Schilde, A.Kwade, S.Doose, M.Eslami Pirharati
Synthesis and Analysis of Spherical Cementitious Model Particles
Rilem Bookseries, Volume 23, 602-609
B. Finke, J. Hesselbach, A. Schütt, M. Tidau, B. Hampel, M. Schilling, A. Kwade, C. Schilde
Influence of formulation parameters on the freeform extrusion process of ceramic pastes and resulting product properties
Additive Manufacturing, Volume 32
S. Linke, L. Windisch, N. Kueter, J. Wanvik, A. Voss, E. Stoll, C. Schilde, A. Kwade
TUBS-M and TUBS-T based modular Regolith Simulant System für the support of lunar ISRU activities
Planetary and Space Science, Volume 180
B. Finke, C. Schilde, A. Kwade
Numerical Simulation of the Rheological Behavior of Nanoparticulate Suspensions
Materials,Volume 13, Issue 19, Seiten 1-18
Schrinner, K., Veiter, L., Schmideder, S., Doppler, P., Schrader, M., Münch, N. Morphological and physiological characterization of filamentous Lentzea aerocolonigenes: Comparison of biopellets by microscopy and flow cytometry. PLoS ONE 15, e0234125. doi: 10.1371/journal.pone.0234125
K.Vorländer, I.Kampen, J.H.Finke, A.Kwade
Along the Process Chain to Probiotic Tablets: Evaluation of Mechanical Impacts on Microbial Viability
Pharmaceutics, Volume 12, Issue 66, 2020
T.R. Heyn, J.Mayer, H.R. Neumann, C. Selhuber-Unkel, A. Kwade, K.Schwarz, J.K. Keppler
The threshold of amyloid aggregation of beta-lactoglobulin: Relevant factor combinations
Journal of Food Engineering, Volume 283, 2020
S. Czyz, M. Wewers, J.H. Finke, A. Kwade, B. van Eerdenbrugh, M. Juhnke, H. Bunjes
Spray drying of API nanosuspensions: Importance of drying temperature, type and content of matrix former and particle size for successful formulation and process development
European Journal of Pharmaceutics and Biopharmaceutics, Volume 152, 63-71, 2020
A. Schomberg, A. Kwade, J.H. Finke
The Challenge of Die Filling in Rotary Presses: A Systematic Study of Material Properties and Process Parameters
Pharmaceutics, Volume 12, Issue 3, 2020
D. Puckhaber, S. Eichler, A. Kwade, J.H. Finke
Impact of particle and equipment properties on residence time distribution of pharmaceutical excipients in rotary tablet presses
Pharmaceutics, Volume 12, Issue 3, 2020
R. Cabiscol, H. Shi, I. Wünsch, V. Magnanimo, J.H. Finke, S. Luding, A. Kwade
Effect of particle size on powder compaction and tablet strength using limestone
Advanced Powder Technology, Volume 31, Issue 3, 1280-1289, 2020
J. Riewe, P. Erfle, S. Melzig, A. Kwade, A. Dietzel, H. Bunjes
Antisolvent precipitation of lipid nanoparticles in microfluidic systems – A comparative study
International Journal of Pharmaceutics, Volume 579, 2020
M. Wewers, S. Czyz, J.H. Finke, E. John, B. van Eerdenbrugh, M. Juhnke, H. Bunjes, A. Kwade
Influence of Formulation Parameters on Redispersibillity of Naproxen Nanoparticles from Granules Produced in a Fluidizes Bed Process
Pharmaceutics, Volume 12, Issue 4 2020
M.Nöske, S.Breitung-Faes, A.Kwade
Impact of stress conditions on stirred media milling of a two component mixture
Minerals Engineering, Volume 146
P. Prziwara, L. D. Hamilton, S. Breitung-Faes, A. Kwade
Evaluation of the capturing of dry fine particles between grinding media by drop-weight tests
Powder Technology, Volume 363, 326-336
C.F. Burmeister, R. Schmidt, K. Jacob, S. Breitung-Faes, A. Stolle, A. Kwade
Effect of stressing conditions on mechanochemical Knoevenagel synthesis
Chemical Engineering Journal, Volume 396
H. Dreger, W. Haselrieder, A. Kwade
Influence of dispersing by extrusion and calendering on the performance of lithium-ion-battery electrodes
Journaly of Energy Storage, Volume 21, 231-240
L. Froböse, J. F. van der Sichel, T. Loellhoeffel, L. Helmers, A. Kwade
Effect of microstructure on the ionic conductivity of an all solid-state battery electrode
Journal of Electrochemical Society, Volume 166, Issue 2, A318-A328
B. Rumberg, K. Schwarzkopf, B. Epding, I. Stradtmann, A. Kwade
Understanding the different aging trends of usable capacity and mobile Li capacity in Li-ion cells
Journal of Energy Storage, Volume 22, 336-344
B. Epding, B. Rumberg, H. Jahnke, I. Stradtmann, A. Kwade
Investigation of significant capacity recovery effects due to long rest periods during high current cyclic aging tests in automotive lithium ion cells and their influence on lifetime
Journal of Energy Storage, Volume 22, 249-256
S. Ohno, R. Koerver, G. Dewald, J. Janek, C. Rosenbach, P. Titscher, D. Steckermeier, A. Kwade, W. Zeier
Observation of chemo-mechanical failure and influence of cut-off potentials in all-solid-state Li-S batteries
Chemistry of Materials, Volume 31, Issue 8, 2930-2940
C. Sangrós Giménez, B. Finke, C. Schilde, L. Froböse, A. Kwade
Numerical simulation of the behavior of lithium-ion battery electrodes during the calendering process via the discrete element method
Powder Technology, Volume 349, 1-11
C. Meyer, M. Weyhe, W. Haselrieder, A. Kwade
Heated Calendering of Cathodes for Lithium-Ion Batteries with Varied Carbon Black and Binder Contents
Energy Technology, DOI: 10.1002/ente.201900175
M. Schönemann, H. Bockholt, S. Thiede, A. Kwade, C. Herrmann
Multiscale simulation approach for production systems: Application to the production of lithium-ion battery cells
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-3054-y
S. Thiede, A. Turetskyy, A. Kwade, S. Kara, C. Hermann
Data mining in battery production chains towards multi- criterial quality prediction
CRIP Annuals, Volume 68, Issue 1, 463-466
B. Rumberg, B. Epding, I. Stradtmann, A.Kwade
Identification of Li ion battery cell aging mechanism by half-cell and full-cell open-circuit-voltage characteristic analysis
Journal of Energy Storage, Volume 25
P.Titscher, L.Helmers, A.Diener, A.Kwade
Deposition of Zinc Species in 3D Structured Zinc Anodes in Nonstirred Alkaline Systems Observed by X-Ray Micro Tomography
Energy Technology, Volume 7
C.Nowak, L.Froboese, M.Winter, W. Haselrieder, A.Kwade
Designing Graphite-Based Positive electrodes and Their Properties in Dual-Ion Batteries Using Particle Size-Adjusted Active Materials
Energy Technology, Volume 7
C. Sangrós Giménez, C. Schilde, L. Froböse, S. Ivanov, A. Kwade
Mechanical, Electrical, and Ionic Behavior of Lithium‐Ion Battery Electrodes via Discrete Element Method Simulations
Energy Technology, Volume 217
M.Haarmann, W.Haselrieder, A.Kwade
Extrusion‐Based Processing of Cathodes: Influence of Solid Content on Suspension and Electrode Properties
Energy Technology
F. Huttner, W. Haselrieder, A. Kwade
The Influence of Different Post‐Drying Procedures on Remaining Water Content and Physical and Electrochemical Properties of Lithium‐Ion Batteries
Energy Technology
G.Schälicke, I.Landwehr, A.Dinter, K.Pettinger, W.Haselrieder, A.Kwade
Solvent-Free Manufacturing of Electrodes for Lithium-Ion Batteries via Electrostatic Coating
Energy Technology
J.Mayer, L.Almar, E.Asylbekov, W.Haselrieder, A.Kwade, A.Weber, H.Nirschl
Influence of the Carbon Black Dispersing Process on the Microstructure and Performance of Li‐ion Battery Cathodes
Energy Technology
D.Düerkop, H.Widdecke, A.Schmiemann, U.Kunz, C.Schilde
Low-Cost-Membranen für die Vanadium-Redox-Flow-Batterie
Chemie Ingenieur Technik, Volume 91, Issue 8
P.Titscher, A. Götz von Olenhusen, T.Arlt, I.Manke, A.Kwade
Evaluation of a High-Intensive Mixing Process in a Ring Shear Mixer and Its Impact on the Properties of Composite Particles for Lithium–Sulfur Battery Cathodes
Energy Technology, Volume 7 Issue 12
T. Preller, G. Runge, S. Zellmer, D. Menzel, S. Azimi Saein, J. Peters, A. Raatz, B. Tiersch, J. Koetz, G. Garnweitner
Particle-Reinforced and Functionalized Hydrogels for SpineMan, a Soft Robotics Application
Journal of Materials Science, 2019, Volume 54, Issue 5, 4444-4456
J. Bijelic, A. Stankovic, B. Matasovic, B. Markovic, M. Bijelic, Z. Skoko, J. Popovic, G. Stefanic, Z. Jaglicic, S. Zellmer, T. Preller, G. Garnweitner, T. Dordevic, P. Cop, B. Smarsly, I. Djerdj
Structural characterization and magnetic properties determination of nanocrystalline Ba3Fe2WO9 and Sr3Fe2WO9 perovskites prepared by the modified aqueous sol-gel route
CrystEngComm, 2019, Volume 21, Issue 2, 218-227
J. Ungerer, A.-K. Thurm, M. Meier, M. Klinge, G. Garnweitner, H. Nirschl
Development of a growth model for aluminum-doped zinc oxide nanocrystal synthesis via the benzylamine route
Journal of Nanoparticle Research, 2019, Volume 21, No. 106
N. Madanchi, S. Zellmer, M. Winter, F. Flach, G. Garnweitner, C. Herrmann
Investigation on the Effects of Nanoparticles on Cutting Fluid Properties and Tribological Characteristics
International Journal of Precision Engineering and Manufacturing -Green Technology, 2019, Volume 6, 433-447
D. Ag Seleci, V. Maurer, F. Stahl, T. Scheper, G. Garnweitner
Rapid Microfluidic Preparation of Niosomes for Targeted Drug Delivery
International Journal of Molecular Sciences, 2019, Volume 20, No. 4696
L. Kleinfeldt, J. Gädke, R. Biedendieck, R. Krull, G. Garnweitner
Spray-Dried Hierarchical Aggregates of Iron Oxide Nanoparticles and Their Functionalization for Downstream Processing in Biotechnology
ACS Omega, 2019, Volume 4, Issue 15, 16300-16308
J. C. Porsiel, B. Temel, A. Schirmacher, E. Buhr, G. Garnweitner
Dimensional characterization of cadmium selenide nanocrystals via indirect Fourier transform evaluation of small-angle X-ray scattering data
Nano Research, 2019, Volume 12, Issue 11, 2849-2857
B. Finke, H. Nolte, C. Schilde, A. Kwade
Stress mechanisms acting during the dispersing in highly viscous media and their impact on the production of nanoparticle composites
Chemical Engineering Research and Design, Volume 141, 56-65
F. Flach, L.Fries, J.Kammerhofer, S.Heinrich, A.Kwade
Optimization of aqueous microgrinding processes for fibrous plant materials
Advanced Powder Technology, Volume 30
M. Nöske, S. Breitung-Faes, A. Kwade
Electrostatic Stabilization and Characterization of Fine Ground Silicon Particles in Ethanol
Silicon,Volume 11, 3001-3010
D. Steiner, J. H. Finke, A. Kwade
Model-based description of disintegration time and dissolution rate of nanoparticle-loaded orodispersible films
European Journal of Pharmaceutical Sciences, Volume 132, 18-26
D. Steiner, J. H. Finke, A. Kwade
SOFTs - Structured orodispersible film templates
European Journal of Pharmaceutics and Biopharmaceutics, Volume 137, 209-217
I. Wünsch, J.H. Finke, E. John, M. Juhnke, A. Kwade
A mathematical approach to consider solid compressibility in the compression of pharmaceutical powders
Pharmaceutics, Volume 11, Issue 3, 121
S. Melzig, J. H. Finke, C. Schilde, A. Vierheller, A. Dietzel, A. Kwade
Fluid mechanics and process design of high-pressure antisolvent precipitation of fenofibrate nanoparticles using a customized microsystem
Chemical Engineering Journal, Volume 371, 554-564
M. Schrader, K. Pommerehne, S. Wolf, B. Finke, C. Schilde, I. Kampen, T. Lichtenegger, R. Krull, A. Kwade
Design of a CFD-DEM-based method for mechanical stress calculation and its application to glass bead-enhanced cultivations of filamentous Lentzea aerocolonigenes
Biochemical Engineering Journal, Volume 148, 116 - 130.
R. Cabiscol, J.H. Finke, A.Kwade
Assessment of particle rearrangement and anisotropy in high-load tableting with a DEM-based elasto-plastic cohesive model
Granular Matter, Volume 21, Issue 4
S. Melzig, F.Purr, T. Lorenz, A.Kwade, A. Dietzel
Microfluidic spray drying device for process-oriented product development with low sample consumption
Microfluidics and Nanofluidics, Volume 23, Issue 12
M.Tidau, A.Kwade,J.H.Finke
Influence of High, Disperse API Load on Properties along the Fused-Layer Modeling Process Chain of Solid Dosage Forms
Pharmaceutics, Volume 11, Issue 194
M.Kubiak, K.Storm, I.Kampen, C.Schilde
Relationship between Cross-Linking Reaction Time and Anisotropic Mechanical Behavior of Enzyme Crystals
Crystal Growth & Design, Volume 19, Issue 8, 4453-4464
J.Kottmeier, M.Wullenweber, S.Blahout, A.Kwade, A.Dietzel
Accelerated particle separation in a DLD device at Re>1 investigated by means of μPIV
Micromachines, Volume 10, Issue 768
D. Schons, A. Kwade
Determination of the axial grinding media distribution in the radiometric densitometry
Minerals Engineering, Volume 130, 110-116
S. Beitz, R. Uerlich, T. Bokelmann, A. Diener, T. Vietor, A. Kwade
Influence of Powder Deposition on Powder Bed and Specimen Properties
Materials, Volume 12, Issue 2, 297
F. Flach, S. Breitung-Faes, A. Kwade
Tailoring product formulation properties to reduce grinding media wear
Chemical Engineering Science, Volume 207, 69-78
S. Breitung-Faes, A.Kwade
Mill, material, and process parameters- A mechanistic modell for the set-up of wet-stirred media milling processes
Advanced Powder Technology, Volume 30, Issue 8, 1425-1433
P. Prziwara, S. Breitung-Faes, A. Kwade
Comparative study of the grinding aid effects for dry fine grinding of different materials
Minerals Engineering, Volume 144
2018 – Bio- und Pharmapartikeltechnik
R. Cabiscol, J. H. Finke, A. Kwade
Calibration and interpretation of DEM parameters for simulations of cylindrical tablets with multi-sphere approach
Powder Technology, Volume 327, 232-245
2018 – Batterieverfahrenstechnik
G. Lenze, H. Bockholt, C. Schilcher, L. Froböse, D. Jansen, U. Krewer, A. Kwade
Impacts of Variations in Manufacturing Parameters on Performance of Lithium-Ion-Batteries
Journal of the Electrochemical Society, Volume 165, Issue 2, A314-A322
2018 – Batterieverfahrenstechnik
F. Cerdas, P. Titscher, N. Bognar, R. Schmuch, M. Winter, A. Kwade, C. Herrmann
Exploring the Effect of Increased Energy Density on the Environmental Impacts of Traction Batteries: A Comparison of Energy Optimized Lithium-Ion and Lithium-Sulfur Batteries for Mobility Applications
Energies, Volume 11, Issue 1, Article 150
2018 – Zerkleinern
C. Burmeister, L. Titscher, S. Breitung-Faes, A. Kwade
Dry grinding in planetary ball mills: Evaluation of a stressing model
Advanced Powder Technology, Volume 29, Issue 1, 191-201
2018 – Batterieverfahrenstechnik
T. J. Adam, G. Liao, J. Petersen, S. Geier, B. Finke, P. Wierach, A. Kwade, M. Wiedemann
Multifunctional Composites for Future Energy Storage in Aerospace Structures
Energies, Volume 11, Issue 2, Article 335
2018 – Zerkleinern
P. Prziwara, S. Breitung-Faes, A. Kwade
Impact of grinding aids on dry grinding performance, bulk properties and surface energy
Advanced Powder Technology, Volume 29, Issue 2, 416-425
2018 – Granulare Medien und Feste Formen
H. Shi, R. Mohanty, S. Chakravarty, R. Cabiscol, M. Morgeneyer, H. Zetzener, J.Y. Ooi, A. Kwade, S. Luding, V. Magnanimo
Effect of particle size and cohesion on powder yielding and flow
KONA Powder and Particle Journal, Volume 2018, Issue 35, 226-250
2018 – Bio- und Pharmapartikeltechnik
S. Melzig, D. Niedbalka, C. Schilde, A. Kwade
Spray drying of amorphous ibuprofen nanoparticles for the production of granules with enhanced drug release
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 536, 133-141
2018 – Batterieverfahrenstechnik
P. Titscher, S. Zellmer, C. F. Burmeister, L. O. Schmidt, S. Breitung-Faes, G. Garnweitner, A. Kwade
Evaluation of Processes for Mechanical Manufacturing of Composite Materials for Li-Sulfur Batteries
Chemie Ingenieur Technik, Volume 90, Issue 4, 513-520
2018 – Nanomaterialien
A. Kockmann, J. C. Porsiel, R. Saadat, G. Garnweitner
Impact of nanoparticle surface modification on the mechanical properties of polystyrene-based nanocomposites
RSC Adv., Volume 8, Issue 20, 11109-11118
2018 – Bio- und Pharmapartikeltechnik
B. Bonhoeffer, A. Kwade, M. Juhnke
Alternative manufacturing concepts for solid oral dosage forms from drug nanosuspensions using fluid dispensing and forced drying technology
Journal of pharmaceutical sciences, Volume 107, Issue 3, 909-921
2018 – Nanomaterialien
T. Preller, D. Menzel, S. Knickmeier, J. C. Porsiel, B. Temel, G. Garnweitner
Non-Aqueous Sol-Gel Synthesis of FePt Nanoparticles in the Absence of In Situ Stabilizers
Nanomaterials, Volume 8, Issue 5, 297
2018 – Formulierungstechnik
J. Hesselbach, A.-C. Böttcher, I. Kampen, G. Garnweitner, C. Schilde, A. Kwade
Process and Formulation Strategies to Improve Adhesion of Nanoparticulate Coatings on Stainless Steel
Coatings, Volume 8, Issue 5, 156
2018 – Nanomaterialien
A. Salmatonidis, J. Hesselbach, G. Lilienkamp, T. Graumann, W. Daum, A. Kwade, G. Garnweitner
Chemical Cross-Linking of Anatase Nanoparticle Thin Films for Enhanced Mechanical Properties
Langmuir, Volume 34, Issue 21, 6109-6116
2018 – Batterieverfahrenstechnik
C. Meyer, M. Kosfeld, W. Haselrieder, A. Kwade
Process modeling of the electrode calendering of lithium-ion batteries regarding variation of cathode active materials and mass loadings
Journal of Energy Storage, Volume 18, 371-379
2018 – Zerkleinern
S. Beinert, A. Kwade, C. Schilde
Strategies for multi-scale simulation of fine grinding and dispersing processes: Drag coefficient and fracture of fractal aggregates
Advanced Powder Technology, Volume 29, Issue 3, 707-718
2018 – Batterieverfahrenstechnik
P. Titscher, P. Schön, M. Horst, U. Krewer, A. Kwade
Increasing Energy Densities of Sulfur Cathodes using Dispersing and Calendering Processes for Lithium-Sulfur Batteries
Energy Technology, Volume 6, Issue 6, 1139-1147
2018 – Zerkleinern
S. Beinert, G. Fragnière, C. Schilde, A. Kwade
Multiscale simulation of fine grinding and dispersing processes: Stressing probability, stressing energy and resultant breakage rate
Advanced Powder Technology, Volume 29, Issue 3, 573-583
2018 – Nanomaterialien
P. Stolzenburg, T. Lorenz, A. Dietzel, G. Garnweitner
Microfluidic synthesis of metal oxide nanoparticles via the nonaqueous method
Chemical Engineering Science, Volume 191, 500-510
2018 – Batterieverfahrenstechnik
A. Kwade, W. Haselrieder, R. Leithoff, A. Modlinger, F. Dietrich, K. Droeder
Current status and challenges for automotive battery production technologies
Nature Energy, Volume 3, Issue 4, 290-300
2018 – Granulare Medien und Feste Formen
F. Flach, S. Breitung-Faes, A. Kwade
Model based process optimization of nanosuspension preparation via wet stirred media milling
Powder Technology, Volume 331, 146-154
2018 – Batterieverfahrenstechnik
C. Sangrós Giménez, B. Finke, C. Nowak, C. Schilde, A. Kwade
Structural and mechanical characterization of lithium-ion battery electrodes via DEM simulations
Advanced Powder Technology, Volume 29, Issue 10, 2312-2321
2018 – Bio- und Pharmapartikeltechnik
M. Kohnke, J. H. Finke, A. Kwade, J. Rösler
Investigation of nanoporous superalloy membranes for the production of nanoemulsions
Metals, Volume 8, Issue 5, 361
2018 – Pulver- und Suspensionsprozesse
P. Prziwara, S. Breitung-Faes, A. Kwade
Impact of the powder flow behavior on continuous fine grinding in dry operated stirred media mills
Minerals Engineering, Volume 128, 215-223
2018 – Bio- und Pharmapartikeltechnik
S. Melzig, J. H. Finke, C. Schilde, A. Kwade
Formation of long-term stable amorphous ibuprofen nanoparticles via antisolvent melt precipitation (AMP)
European Journal of Pharmaceutics and Biopharmaceutics, Volume 131, 224-231
2018 – Nanomaterialien
P. Stolzenburg, B. Hämisch, S. Richter, K. Huber, G. Garnweitner
Secondary Particle Formation during the Nonaqueous Synthesis of Metal Oxide Nanocrystals
Langmuir, Volume 34, Issue 43, 12384-12844
2018 – Bio- und Pharmapartikeltechnik
R. Cabiscol, J. H. Finke, H. Zetzener, A. Kwade
Characterization of mechanical property distributions on tablet surfaces
Pharmaceutics, Vol. 10, Issue 4, 184
2018 – Pulver- und Suspensionsprozesse
P. Prziwara, L. D. Hamilton, S. Breitung-Faes, A. Kwade
Impact of grinding aids and process parameters on dry stirred media milling
Powder Technology, Volume 335, 114-123
2018 – Bio- und Pharmapartikeltechnik
M. Kubiak, J. Solarczek, I. Kampen, A. Schallmey, A. Kwade, C. Schilde
Micromechanics of Anisotropic Cross-Linked Enzyme Crystals
Crystal Growth & Design, Volume 18, pp. 5885-5895
2018 – Formulierungstechnik
G. Fragnière, S. Beinert, A. Overbeck, I. Kampen, C. Schilde, A. Kwade
Predicting effects of operating condition variations on breakage rates in stirred media mills
Chemical Engineering Research and Design, Volume 138, 433-443
2018 – Batterieverfahrenstechnik
B. G. Westphal, A. Kwade
Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries
Journal of Energy Storage, Volume 18, 509-517
2018 – Bio- und Pharmapartikeltechnik
C. Müller-Goymann, A. Kwade
Innovative processes for bio-pharmaceuticals and poorly water-soluble API
European Journal of Pharmaceutics and Biopharmaceutics, Volume 126, Article 1
2018 – Bio- und Pharmapartikeltechnik
I. Speer, D. Steiner, Y. Thabet, J. Breitkreutz, A. Kwade
Comparative study on disintegration methods for oral film preparations
European Journal of Pharmaceutics and Biopharmaceutics, Volume 132, pp. 50-61
2017 – Bio- und Pharmapartikeltechnik
D. Steiner, J. H. Finke, A. Kwade
Instant ODFs – Development of an intermediate, nanoparticle-based product platform for individualized medication
European Journal of Pharmaceutics and Biopharmaceutics
2017 – Nanomaterialien
P. Stolzenburg, G. Garnweitner
Experimental and numerical insights into the formation of zirconia nanoparticles: a population balance model for the nonaqueous synthesis
Reaction Chemistry & Engineering, 2, 337-348
2017 – Bio- und Pharmapartikeltechnik
K. Göke, T. Lorenz, A. Repanas, F. Schneider, D. Steiner, K. Baumann, H. Bunjes, A. Dietzel, J. H. Finke, B. Glasmacher, A. Kwade
Novel strategies for the formulation and processing of poorly watersoluble drugs
European Journal of Pharmaceutics and Biopharmaceutics, 01
2017 – Nanomaterialien
S. Zellmer, P. Titscher, E. Wienken, A. Kwade, G. Garnweitner
Fabrication of carbon-sulphur composites via a vibration mill process as cathode material for lithium sulphur batteries
Energy Storage Materials, Volume 9, 70-77
2017 – Bio- und Pharmapartikeltechnik
D. Steiner, J. H. Finke, A. Kwade
Redispersion of Nanoparticle-Loaded Orodispersible Films: Preservation of Particle Fineness
Chemie Ingenieur Technik,Volume 89, Issue 8, 1034-1040
2017 – Zerkleinern
F. Flach, S. Breitung-Faes, A. Kwade
Scaling Wet Fine Grinding Processes of Organic Particles Using Stirred Media Mills
Chemie Ingenieur Technik,Volume 89, Issue 8, 1051-1059
2017 – Nanomaterialien
J. Gädke, J.-W. Thies, L. Kleinfeldt, A. Kalinin, G. Starke, A. Lakowitz, R. Biedendieck, G. Garnweitner, A. Dietzel, R. Krull
Integrated in situ-purification of recombinant proteins from Bacillus megaterium cultivation using SPION in stirred tank reactors
Biochemical Engineering Journal, Volume 126, 58-67
2017 – Nanomaterialien
J. Gädke, L. Kleinfeldt, C. Schubert, M. Rohde, R. Biedendieck, G. Garnweitner, R. Krull
In situ affinity purification of his-tagged protein A from Bacillus megaterium cultivation using recyclable supramagnetic iron oxide nanoparticles
Journal of Biotechnology, Volume 242, 55-63
2017 – Zerkleinern
A. J. R. Lopez-Arreguin, S. Linke, E. Stoll, R. Freund, P. F. Prziwara, A. Voss, C. Schilde, A. Kwade, E. Homey, T. Schroeder, M. Wiehle, D. Thomas
3D4 Space - Advanced Systems, Components, and Novel Methods for Planetary Exploration with Wheeled Mobile Robots
Journal of Space Exploration, Volume 6, Issue 3; 139
2017 – Bio- und Pharmapartikeltechnik
A. Overbeck, S. Günther, I. Kampen, A. Kwade
Compression Testing and Modeling of Spherical Cells – Comparison of Yeast and Algae
Chemical Engineering and Technology, Volume 40, Issue 6, 1158-1164
2017 – Zerkleinern
F. Flach, S. Breitung-Faes, A. Kwade
Grinding media wear induced agglomeration of electrosteric stabilized particles
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 522, 140-151
2017 – Batterieverfahrenstechnik
L. Froböse, P. Titscher, B. Westphal, W. Haselrieder, A. Kwade
Mercury intrusion for ion- and conversion-based battery electrodes – Structure and diffusion coefficient determination
Materials Characterization, Volume 133, 102-111
2017 – Batterieverfahrenstechnik
P. Titscher, J.-C. Riede, J. Wiedemann, U. Kunz, A. Kwade
Multiscale structured particle based zinc anodes in non-stirred alkaline systems for zinc air batteries
Energy Technology, DOI 10.1002/ente.201700758
2017 – Batterieverfahrenstechnik
C. Meyer, H. Bockholt, W. Haselrieder, A. Kwade
Characterization of the calendering process for compaction of electrodes for lithium-ion batteries
Journal of Materials Processing Technology, Volume 249, 172-178
2017 – Zerkleinern
S. Breitung-Faes
Estimation of product relating energy of wet operated stirred media mills in terms of process transfer to other mill geometries and sizes
Minerals Engineering, Volume 103-104, 33-42
2017 – Formulierungstechnik
F. Sambale, J. Hesselbach, B. Finke, C. Schilde, F. Stahl, D. Bahnemann, T. Scheper, A. Kwade
Surface and Mechanical Properties of Nanoparticulate Resin Coatings and Their Toxicological Characterization
Chemical Engineering and Technology, Volume 40, Issue 2, 376-384
2017 – Formulierungstechnik
J. Hesselbach, A. Kockmann, S. Lüke, A. Overbeck, G. Garnweitner, C. Schilde, A. Kwade
Enhancement of the mechanical properties of nanoparticulate thin coatings via surface modification and cross-linking additive
Chemical Engineering and Technology, Volume 40, Issue 9, 1561-1568
2017 – Batterieverfahrenstechnik
J. Huesker, L. Froböse, A. Kwade, M. Winter, T. Placke
In Situ Dilatometric Study of the Binder Influence on the Electrochemical Intercalation of Bis(trifluoromethanesulfonyl) imide Anions into Graphite
Electrochimica Acta, Volume 257, 423-435
2017 – Formulierungstechnik
M. Jux, B. Finke, T. Mahrholz, M. Sinapius, A. Kwade, C. Schilde
Effects of Al(OH)O nanoparticle agglomerate size in epoxy resin on tension, bending, and fracture properties
Journal of Nanoparticle Research, Volume 19, Issue 4, 139
2017 – Bio- und Pharmapartikeltechnik
M. Dorn, C. Schilde, C. F. Burmeister, D. Hekmat
Mechanical characterization of compressible chromatographic particles
Powder Technology, Volume 320, 213-222
2016 – Bio- und Pharmapartikeltechnik
D. Steiner, J. H. Finke, A. Kwade
Efficient production of nanoparticle-loaded orodispersible films by process integration in a stirred media mill
International Journal of Pharmaceutics, Vol. 511 (2016), 803-8013
2016 – Nanomaterialien
S. Zellmer, M. Lindenau, S. Michel, G. Garnweitner, C. Schilde
Influence of surface modification on structure formation and micromechanical properties of spray-dried silica aggregates
Journal of Colloid and Interface Science, Vol. 464, 2015, 183-190
2016 – Granulare Medien und Feste Formen
T. Simons, S. Bensmann, S. Ziganc, H.J. Feise, H. Zetzener, A. Kwade
Characterization of Granular Mixing in a Helical Ribbon Blade Blender
Powder Technology, Vol. 293 (2016), 15-25
2016 – Formulierungstechnik
T. Gothsch, C. Richter, S. Beinert, C. Schilcher, C. Schilde, S. Büttgenbach, A. Kwade
Effect of Cavitation on Dispersion and Emulsification Process in High-Pressure Microsystems (HPMS)
Chemical Engineering Science, Vol. 144 (2016), 239-248
2016 – Zerkleinern
C. Konnerth, F. Flach, S. Breitung-Faes, C. Damm, J. Schmidt, A. Kwade, W. Peukert
Impact of Stressing Conditions and Polymer–Surfactant Interactions on Product Characteristics of Organic Nanoparticles Produced by Media Milling
Powder Technology, Vol. 294 (2016), 71-79
2016 – Batterieverfahrenstechnik
H. Bockholt, W. Haselrieder, A. Kwade
Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
Powder Technology, Volume 297, 266-274
2016 – Granulare Medien und Feste Formen
M. Combarros Garcia, H.J. Feise, S. Strege, A. Kwade
Segregation in Heaps and Silos: Comparison Between Experiment, Simulation and Continuum Model
Powder Technology, Vol. 293 (2016), 26-35
2016 – Granulare Medien und Feste Formen
O. I. Imole, M. Paulick, V. Magnanimo, M. Morgeneyer, B. E. Chávez Montes, M. Ramaioli, A. Kwade, S. Luding
Slow stress relaxation behavior of cohesive powders
Powder Technology, Vol. 293 (2016), 82-93
2016 – Batterieverfahrenstechnik
H. Bockholt, M. Indrikova, A. Netz, F. Golks, A. Kwade
The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties
Journal of Power Sources, Volume 325, 140-151
2016 – Zerkleinern
D. Steiner, J. H. Finke, S. Breitung-Faes, A. Kwade
Breakage, temperature dependency and contamination of Lactose during ball milling in ethanol
Advanced Powder Technology, Vol. 27, No. 4 (2016), 1700-1709
2016 – Zerkleinern
F. Flach, S. Breitung-Faes, A. Kwade
Feinstzerkleinerung organischer Partikeln in Rührwerkskugelmühlen: Bestimmung günstiger Formulierungen und Prozessparameter
Chemie Ingenieur Technik,Volume 88, Issue 7, 850-856
2016 – Nanomaterialien
A. Kockmann, J. Hesselbach, C. Schilde, A. Kwade, G. Garnweitner
Verbesserung von Kunstharzbeschichtungen durch Nanopartikel mit maßgeschneiderter Oberflächenmodifizierung
Chemie Ingenieur Technik, Volume 88, Issue 7, Pages 958-966
2016 – Zerkleinern
L. Titscher, S. Breitung-Faes, A. Kwade
Experimentelle Parameterstudie zur Trockenzerkleinerung in Planetenkugelmühlen
Chemie Ingenieur Technik, Volume 88, Issue 10, 1524-1529
2016 – Nanomaterialien
M. Einert, R. Ostermann, T. Weller, S. Zellmer, G. Garnweitner, B. M. Smarsly, R. Marschall
Hollow α-Fe2O3 nanofibres for solar water oxidation: Improving the photoelectrochemical performance by formation of α-Fe2O3/ITO-composite photoanodes
Journal of Materials Chemistry A, Volume 4, Issue 47, 18444-18456
2016 – Nanomaterialien
N. Mainusch, T. Christ, T. Siedenburg, T. O'Donnell, M. Lutansieto, P.-J. Brand, G. Papenburg, N. Harms, B. Temel, G. Garnweitner, W. Viöl
New Contact Probe and Method to Measure Electrical Resistances in Battery Electrodes
Energy Technology, Volume 4, Issue 12, 1550-1557
2016 – Nanomaterialien
I.-C. Masthoff, M. Kraken, D. Menzel, F. J. Litterst, G. Garnweitner
Study of the growth of hydrophilic iron oxide nanoparticles obtained via the non-aqueous sol-gel method
Journal of Sol-Gel Science and Technology, Volume 77, Issue 3, 553-564
2016 – Nanomaterialien
P. Stolzenburg, A. Freytag, N. C. Bigall, G. Garnweitner
Fractal growth of ZrO2 nanoparticles induced by synthesis conditions
CrystEngComm, Volume 18, Issue 43, 8396-8405
2016 – Nanomaterialien
T. Wahl, S. Zellmer, J. Hanisch, G. Garnweitner, E. Ahlswede
Thin indium tin oxide nanoparticle films as hole transport layer in inverted organic solar cells
Thin Solid Films, Volume 616, 419-424
2016 – Nanomaterialien
M. Zimmermann, K. Ibrom, P. G. Jones, G. Garnweitner
Formation of a Dimeric Precursor Intermediate during the Nonaqueous Synthesis of Titanium Dioxide Nanocrystalsnthesis of Titanium Dioxide Nanocrystals
ChemNanoMat, Volume 2, 1073-1076
2016 – Batterieverfahrenstechnik
C. Schilcher, C. Meyer, A. Kwade
Structural and Electrochemical Properties of Calendered Lithium Manganese Oxide Cathodes
Energy Technology, Volume 4, Issue 12, 1604-1610
2015 – Formulierungstechnik
N. Barth, M. Zimmermann, A. E. Becker, T. Graumann, G. Garnweitner, A. Kwade
Influence of TiO2 nanoparticle synthesis on the properties of thin coatings
Thin Solid Films, Vol. 574 (2015), 20-27
2015 – Batterieverfahrenstechnik
M. Grützke, V. Kraft, B. Hoffmann, S. Klamor, J. Diekmann, A. Kwade, M. Winter, S. Nowak
Aging investigations of a lithium-ion battery electrolyte from a field-tested hybrid electric vehicle
Journal of Power Sources, Vol. 273 (2015), 83-88
2015 – Formulierungstechnik
T. Gothsch, C. Schilcher, C. Richter, S. Beinert, A. Dietzel, S. Büttgenbach, A. Kwade
High-Pressure Microfluidic Systems (HPMS): Flow And Cavitation Measurements in Supported Silicon Microsystems
Microfluidics and Nanofluidics, , Vol. 18, No. 1 (2015), 121-130
2015 – Nanomaterialien
I.-C. Masthoff, A. Gutsche, H. Nirschl, G. Garnweitner
Oriented Attachment of Ultra-Small Mn(1-x)ZnxFe2O4 during the non-aqueous sol–gel synthesis
CrystEngComm, Vol. 17, No. 12 (2015), 2464-2470
2015 – Granulare Medien und Feste Formen
T. Simons, R. Weiler, S. Strege, S. Bensmann, M. Schilling, A. Kwade
A Ring Shear Tester as Calibration Experiment for DEM Simulations in Agitated Mixers - a Sensitivity Study
Procedia Engineering, Vol. 102 (2015), 741-748
2015 – Granulare Medien und Feste Formen
J. Feinauer, A. Spettl, I. Manke, S. Strege, A. Kwade, A. Pott, V. Schmidt
Structural Characterization of Particle Systems Using Spherical Harmonics
Materials Characterization, Vol. 106 (2015), 123–133
2015 – Batterieverfahrenstechnik
W. Haselrieder, B. Westphal, H. Bockholt, A. Diener, S. Höft, A. Kwade
Measuring the Coating Adhesion Strength of Electrodes for Lithium-Ion Batteries
International Journal of Adhesion and Adhesives, Vol. 60 (2015), 1-8
2015 – Bio- und Pharmapartikeltechnik
M. Schoenitz, J. H. Finke, S. Melzig, A. Hohlen, N. Warmeling, C.C. Müller-Goymann, W. Augustin, S. Scholl
Fouling in a Micro Heat Exchanger During Continuous Crystallization of Solid Lipid Nanoparticles
Heat Transfer Engineering, Vol. 36 (2015), 731-740
2015 – Granulare Medien und Feste Formen
M. Paulick, M. Morgeneyer, A. Kwade
A New Method for the Determination of Particle Contact Stiffness
Granular Matter, Vol. 17, No. 1 (2015), 83-93
2015 – Zerkleinern
A. Bitterlich, C. Laabs, I. Krautstrunk, M. Dengler, M. Juhnke, A. Grandeury, H. Bunjes, A. Kwade
Process Parameter Dependent Growth Phenomena of Naproxen Nanosuspension Manufactured by Wet Media Milling
European Journal of Pharmaceutics and Biopharmaceutics, Vol. 92 (2015), 171-179
2015 – Granulare Medien und Feste Formen
A. Weuster, S. Strege, L. Brendel, H. Zetzener, D. E. Wolf, A. Kwade
Shear Flow of Cohesive Powders with Contact Crystallization: Experiment, Model and Calibration
Granular Matter, Vol. 17, No. 2 (2015), 271-286
2015 – Nanomaterialien
A. Kockmann, J. Hesselbach, S. Zellmer, A. Kwade, G. Garnweitner
Facile Surface Tailoring of Metal Oxide Nanoparticles via a Two-Step Modification Approach
RSC Advances, Vol. 5, No. 75 (2015), 60993–60999
2015 – Batterieverfahrenstechnik
C. Hanisch, J.-H. Schünemann, J. Diekmann, B. Westphal, T. Loellhoeffel, P. Prziwara, W. Haselrieder, A. Kwade
In-Production Recycling of Active Materials from Lithium-Ion Battery Scraps
ECS Transactions, Vol. 64, No. 22 (2015), 131-145
2015 – Batterieverfahrenstechnik
B. Westphal, H. Bockholt, T. Günther, W. Haselrieder, A. Kwade
Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties
ECS Transactions, Vol. 64, No. 22 (2015), 57-68
2015 – Nanomaterialien
S. Zellmer, A. Kockmann, I. Dosch, B. Temel, G. Garnweitner
Aluminum Zinc Oxide Nanostructures with Customized Size and Shape by Non-Aqueous Synthesis
CrystEngComm, Vol. 17, No. 36 (2015), 6878-6883
2015 – Batterieverfahrenstechnik
H. Dreger, H. Bockholt, W. Haselrieder, A. Kwade
Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes
Journal of Electronic Materials, Vol. 44, No. 11, 4434-4443
2015 – Nanomaterialien
G. Garnweitner, D. Gebauer, M. Niederberger
Fundamentals of Nanocrystal Formation
CrystEngComm, Vol. 17, No. 36 (2015), 6778-6779
2015 – Granulare Medien und Feste Formen
M. Paulick, M. Morgeneyer, A. Kwade
Review on the Influence of Elastic Particle Properties on DEM Simulation Results
Powder Technology, Vol. 283 (2015), 66-76
2015 – Formulierungstechnik
S. Beinert, T. Gothsch, A. Kwade
Numerical Evaluation of Stresses Acting on Particles in High-Pressure Microsystems Using a Reynolds Stress Model
Chemical Engineering Science, Vol. 123 (2015), 197-206
2015 – Formulierungstechnik
S. Beinert, G.Fragnière, C.Schilde, A.Kwade
Analysis and modelling of bead contacts in wet-operating stirred media and planetary ball mills with CFD–DEM simulations
Chemical Engineering Science, Vol. 134 (2015), 648-662
2015 – Granulare Medien und Feste Formen
M. Paulick, M. Morgeneyer, A. Kwade
Review on the influence of elastic particle properties on DEM simulation results
Powder Technology, Vol. 283 (2015), 66-76
2015 – Nanomaterialien
I.-C. Masthoff, M. Kraken, D. Menzel, F.J. Litterst, G. Garnweitner
Study of the Growth of Hydrophilic Iron Oxide Nanoparticles Obtained via the Non-Aqueous Sol–Gel Method
Journal of Sol-Gel Science and Technology, Vol. 77, No. 3,553-564
2015 – Batterieverfahrenstechnik
M. Indrikova, S. Grunwald, F. Golks, A. Netz, B. Westphal, A. Kwade
The Morphology of Battery Electrodes with the Focus of the Conductive Additives Paths
ECS, Vol. 162, No. 10 (2015), A2021-A2025
2015 – Bio- und Pharmapartikeltechnik
A. Overbeck, I. Kampen, A. Kwade
Mechanical Characterization of Yeast Cells: Effects of Growth Conditions
Letters in Applied Microbiology, Vol. 61, No. 4 (2015), 333-338
2015 – Formulierungstechnik
C. Schilde, M. Schlömann, M., A. Overbeck, S. Linke, A. Kwade
Thermal, Mechanical and Electrical Properties of Highly Loaded CNT-Epoxy Composites - A Model for the Prediction of the Electric Conductivity
Composites Science and Technology, Vol. 117 (2015), 183-190
2015 – Formulierungstechnik
S. Zellmer, G. Garnweitner, T. Breinlinger, T. Kraft, C. Schilde
Hierarchical Structure Formation of Nanoparticulate Spray-Dried Composite Aggregates
ACS Nano, Vol. 9, No. 11 (2015), 10749-10757
2015 – Zerkleinern
R. Schmidt, C. Burmeister, M. Baláz, A. Kwade, A. Stolle
Effect of Reaction Parameters on the Synthesis of 5‑Arylidene Barbituric Acid Derivatives in Ball Mills
Organic Process Research and Development, Vol. 19, No. 3, 427-436
2015 – Formulierungstechnik
J. Hesselbach, N. Barth, K. Lippe, C. Schilde, A. Kwade
Process Chain and Characterisation of Nanoparticle Enhanced Composite Coatings
Advanced Powder Technology, Vol. 26, No. 6 (2015), 1624-1632
2015 – Batterieverfahrenstechnik
C. Hanisch, T. Loellhoeffel, J. Diekmann, J.K. Markley, W. Haselrieder, A. Kwade
Recycling of Lithium-Ion Batteries: A Novel Method to Separate Coating and Foil of Electrodes
Journal of Cleaner Production, Vol. 108 (2015), 301-311
2015 – Batterieverfahrenstechnik
C. Hanisch, J. Diekmann, A. Kwade, W. Haselrieder
Mehr als Kobalt und Nickel
Recycling magazin, No. 5 (2015), 20-23
2014 – Granulare Medien und Feste Formen
S. Strege, A. Weuster, H. Zetzener, L. Brendel, A. Kwade, D. E. Wolf
Approach to Structural Anisotropy in Compacted Cohesive Powder
Granular Matter, Vol. 16, No. 3 (2014), 401-409
2014 – Nanomaterialien
M. Kraken, I.-C. Masthoff, A. Borchers, F.J. Litterst, G. Garnweitner
Formation of magnetic nanoparticles studied during the initial synthesis stage
Hyperfine Interactions, Vol. 224, No. 1-3 (2014), 57-63
2014 – Granulare Medien und Feste Formen
M. Combarros, H.J. Feise, H. Zetzener, A. Kwade
Segregation of particulate solids: Experiments and DEM simulations
Particuology, Vol. 12, No. 1 (2014), 25-32
2014 – Nanomaterialien
I.-C. Mashoff, F. David, C. Wittmann, G. Garnweitner
Functionalization of magnetic nanoparticles with high-binding capacity for affinity separation of therapeutic proteins
Journal of Nanoparticle Research, Vol. 16, No. 1 (2014), 1-10
2014 – Nanomaterialien
M. Zimmermann, G. Garnweitner
Einfluss von Prozessparametern auf die nicht-wässrige Synthese von Titandioxid-Nanopartikeln
Chemie Ingenieur Technik, Vol. 86, No. 3 (2014), 231-237
2014 – Nanomaterialien
C. A. Cheema, G. Garnweitner
Phase-controlled synthesis of ZrO2 nanoparticles for highly transparent dielectric thin films
CrystEngComm, Vol. 6, No. 16 (2014), 3366-3375
2014 – Bio- und Pharmapartikeltechnik
J. Hellriegel, S. Günther, I. Kampen, A.B. Albero, A. Kwade, M. Böl, R. Krull
A Biomimetic Gellan-Based Hydrogel as a Physicochemical Biofilm Model
Journal of Biomaterials and Nanobiotechnology, Vol. 5, No. 2 (2014), 83-97
2014 – Nanomaterialien
I.-C. Masthoff, M. Kraken, D. Mauch, D. Menzel, J. A. Munevar, E. B. Saitovitch, F. J. Litterst, G. Garnweitner
Study of the Growth Process of Magnetic Nanoparticles Obtained via the Non-Aqueous Sol-Gel Method
Journal of Materials Science, Vol. 49, No. 14, 4705-4714
2014 – Zerkleinern
A. Bitterlich, C. Laabs, E. Busmann, A. Grandeury, M. Juhnke, H. Bunjes, A. Kwade
Challenges in Nanogrinding Of Active Pharmaceutical Ingredients
Chemical Engineering & Technology, Vol. 37, No. 5 (2014), 840-846
2014 – Bio- und Pharmapartikeltechnik
B. Cornehl, A. Overbeck, A. Schwab, J.-P. Büser, A. Kwade, H. Nirschl
Breakage of Lysozyme Crystals Due to Compressive Stresses During Cake Filtration
Chemical Engineering Science, Vol. 111, (2014), 324-334
2014 – Bio- und Pharmapartikeltechnik
J. H. Finke, S. Niemann, C. Richter, T. Gothsch, A. Kwade, S. Büttgenbach, C. C. Müller-Goymann
Multiple Orifices in Customized Microsystem High-Pressure Emulsification: The Impact of Design and Counter Pressure on Homogenization Efficiency
Chemical Engineering Journal, Vol. 248 (2014), 107-121
2014 – Formulierungstechnik
N. Barth, C. Schilde, A. Kwade
Influence of Electrostatic Particle Interactions on the Properties of Particulate Coatings of Titanium Dioxide
Journal of Colloid and Interface Science, Vol. 420 (2014),80-87
2014 – Formulierungstechnik
N. Barth, J. Hesselbach, C. Schilde, A. Kwade
Optimierung von Easy-to-Clean-Kompositbeschichtungen mithilfe hydrophober Nanopartikel
Chemie Ingenieur Technik, Vol. 86, No. 3 (2014), 287-294
2014 – Zerkleinern
K. Ohenoja, J. Saari, M. Illikainen, S. Breitung-Faes, A. Kwade, J. Niinimäki
Effect of Polydispersity Index on the Grinding Limits of Highly Concentrated Limestone Suspensions
Chemical Engineering & Technology, Vol. 37, No. 5 (2014), 833-839
2014 – Zerkleinern
K. Ohenoja, S. Breitung-Faes, P. Kinnunen, M. Illikainen, J. Saari, A. Kwade, J. Niinimäki
Ultrafine Grinding of Limestone with Sodium Polyacrylates as Additives in Ordinary Portland Cement Mortar
Chemical Engineering & Technology, Vol. 37, No. 5 (2014), 787-794
2014 – Zerkleinern
S. Breitung-Faes, A. Kwade
Use of an Enhanced Stress Model for the Optimization of Wet Stirred Media Milling Processes
Chemical Engineering & Technology, Vol. 37, No. 5 (2014), 819-826
2014 – Formulierungstechnik
C. Schilde, C. F. Burmeister, A. Kwade
Measurement and Simulation of Micromechanical Properties of Nanostructured Aggregates via Nanoindentation and DEM-simulation
Powder Technology, Vol. 259, No. 5 (2014), 1-13
2014 – Formulierungstechnik
S. Beinert, C. Schilde, G. Gronau, A. Kwade
CFD-Discrete Element Method Simulations Combined with Compression Experiments to Characterize Stirred-Media Mills
Chemical Engineering & Technology, Vol. 37, No. 5 (2014), 770-778
2014 – Batterieverfahrenstechnik
C. Hanisch, W. Haselrieder, A. Kwade
Recycling von Lithium-Ionen-Batterien
Elektronik - Sonderausgabe: ecodesign, März 2014, 40-43
2014 – Batterieverfahrenstechnik
W. Haselrieder, S. Ivanov, H.Y. Tran, S. Theil, L. Froböse, B. Westphal, M. Wohlfahrt-Mehrens, A. Kwade
Influence of Formulation Method and Related Processes on Structural, Electrical and Electrochemical Properties of LMS/NCA-Blend Electrodes
Progress in Solid State Chemistry, Vol. 42, No. 4 (2014), 157-174
2014 – Bio- und Pharmapartikeltechnik
J. H. Finke, C. Richter, T. Gothsch, A. Kwade, S. Büttgenbach, C. C. Müller-Goymann
Coumarin 6 as a fluorescent model drug: How to identify properties of lipid colloidal drug delivery systems via fluorescence spectroscopy?
European Journal of Lipid Science and Technology, Vol. 116, No. 9 (2014), 1234–1246
2014 – Bio- und Pharmapartikeltechnik
M. Paranjpe, J.H. Finke, C. Richter, T. Gothsch, A. Kwade, S. Büttgenbach, C.C. Müller-Goymann
Physicochemical characterization of sildenafil-loaded solid lipid nanoparticle dispersions (SLN) for pulmonary application
International Journal of Pharmaceutics, Vol. 476, No 1 (2014), 41-49
2014 – Batterieverfahrenstechnik
S. Krüger, C. Hanisch, A. Kwade, M. Winter, S. Nowak
Effect of Impurities Caused by a Recycling Process on the Electrochemical Performance of Li[Ni0.33Co0.33Mn0.33]O2
Journal of Electroanalytical Chemistry, Vol. 726 (2014), 91-96
2014 – Zerkleinern
C. F. Burmeister, A. Stolle, R. Schmidt, K. Jacob, S. Breitung-Faes, A. Kwade
Experimental and Computational Investigation of Knoevenagel Condensation in Planetary Ball Mills
Chemical Engineering and Technology, Vol. 37, No. 5 (2014), 857-864
2014 – Bio- und Pharmapartikeltechnik
S. Pretor, J. Bartels, T. Lorenz, K. Dahl, J. H. Finke, G. Peterat, R. Krull, A. T. Al-Halhouli, A. Dietzel, S. Büttgenbach, S. Behrends, S. Reichl, C. C. Müller-Goymann
Cellular Uptake of Coumarin-6 under Microfluidic Conditions into HCE-T Cells from Nanoscale Formulations
Molecular Pharmaceutics, Vol. 12, No 1 (2014), 34-45
2014 – Granulare Medien und Feste Formen
M. Combarros, H. J. Feise, H. Zetzener, A. Kwade
Segregation of particulate solids: Experients and DEM Simulations
Particuology, Vol. 12, No. 1, 25-32
2013 – Granulare Medien und Feste Formen
T. Ittershagen, H. Zetzener, J. Schwedes, A. Kwade
Anisotropic behaviour of bulk solids and its effect on silo design
Powder Technology, Vol. 247 (2013), 260-264
2013 – Granulare Medien und Feste Formen
S. Strege, M. Paulick, A. Kwade
Vom Individuum zum Kollektiv
Chemie&More, No.5 (2013), 14-17
2013 – Formulierungstechnik
B. Schönstedt, C. Schilde, S. Beinert, A. Kwade
Design of Dispersing Processes Using a Newly Developed Dispermeter
Chemical Engineering and Technology, Vol. 36, No. 7, 1099-1107
2013 – Formulierungstechnik
C. Schilde, C. Hanisch, D. Naumann, T. Beierle, A. Kwade
A Novel Way to Vary the Structure of Precipitated Silica and Calcium Carbonate Aggregates in a Wide Range by using Grinding Media During the Precipitation Process
Chemical Engineering Science, Vol.94, No. 3, 127-137
2013 – Formulierungstechnik
C. Schilde, S. Breitung-Faes, I. Kampen, A. Kwade
Grinding Kinetics of Nano-Sized Particles for Different Electrostatic Stabilizing Acids in a Stirred Media Mill
Powder Technology, Vol. 235, No. 3 (2013), 1008-1016
2013 – Zerkleinern
S. Breitung-Faes, A. Kwade
Prediction of Energy Effective Grinding Conditions
Minerals Engineering, Vol. 43-44 (2013), 36-43
2013 – Bio- und Pharmapartikeltechnik
R. Krull, T. Wucherpfennig, M. E. Esfandabadi, R. Walisko, G. Melzer, D.C. Hempel, I.Kampen, A. Kwade, C. Wittmann
Characterization and Control of Fungal Morphology for Improved Production Performance in Biotechnology
Journal of Biotechnology, Vol. 163, No. 2 (2013),112-123
2013 – Granulare Medien und Feste Formen
G. K.P. Barrios, R. M. de Carvalho, A. Kwade, L. M. Tavares
Contact Parameter Estimation for DEM Simulation of Iron Ore Pellet Handling
Powder Technology, Vol. 248 (2013), 84-93
2013 – Formulierungstechnik
C. Richter, D. Stegemann, A. Vierheller, T. Gothsch, J.H. Finke, A. Kwade, C.C. Müller-Goymann, A. Dietzel, S. Büttgenbach
Innovative process chain for the development of wear resistant 3D metal microsystems
Microelectronic Engineering, Vol. 110 (2013), 392-397
2013 – Zerkleinern
C. Burmeister, A. Kwade
Process Engineering with Planetary Ball Mills
Chemical Society Reviews, Vol. 42, No. 18 (2013), 7660-7667
2013 – Formulierungstechnik
N. Barth, C. Schilde, A. Kwade
Influence of particle size distribution on micromechanical properties of thin nanoparticulate coatings
Physics Procedia, Vol. 40 (2013), 9-18
2013 – Formulierungstechnik
N. Barth, J. Hesselbach, C. Schilde, A. Kwade
Nanopartikel in Easy-to-Clean-Oberflächen
mo - Magazin für Oberflächentechnik, Vol. 67, No. 7-8 (2013), 19
2013 – Nanomaterialien
M. Zimmermann, B. Temel, G. Garnweitner
Parameter studies of the synthesis of titanium dioxide nanoparticles: Effect on reaction rate and particle size
Chmical Engineering and Processing, Vol. 74 (2013), 83-89
2013 – Bio- und Pharmapartikeltechnik
M. Vielkind, I. Kampen, A. Kwade
Zinc Oxide Nanoparticles in Bacterial Growth Medium: Optimized Dispersion and Growth Inhibition of Pseudomonas putida
Advances in Nanoparticles, Vol. 2, No. 4 (2013), 287-293
2013 – Batterieverfahrenstechnik
W. Haselrieder, S. Ivanov, D. K. Christen, H. Bockholt, A. Kwade
Impact of the Calendering Process on the Interfacial Structure and the Related Electrochemical Performance of Secondary Lithium-Ion Batteries
ECS Transactions, Vol. 50, No. 26 (2013), 59-70
2013 – Batterieverfahrenstechnik
H. Bockholt, W. Haselrieder, A. Kwade
Intensive Dry and Wet Mixing Influencing the Structural and Electrochemical Properties of Secondary Lithium-Ion Battery Cathodes
ECS Transactions, Vol. 50, No. 26 (2013), 25-35
2013 – Bio- und Pharmapartikeltechnik
A. Wargenau, I. Kampen, A. Kwade
Linking Aggregation of Aspergillus Niger Spores to Surface Electrostatics: A Theoretical Approach
Biointerphases, Vol. 8, No. 1 (2013), 1-12
2013 – Zerkleinern
A. Ämmälä, H. Liimatainen, C. F. Burmeister, J. Niinimäki
Effect of Tempo and Periodate-Chlorite Oxidized Nanofibrils on Ground Calcium Carbonate Flocculation and Retention in Sheet Forming and on the Physical Properties of Sheets
Cellulose, Vol. 20, No. 5 (2013), 2451-2460
2013 – Bio- und Pharmapartikeltechnik
M. Paranjpe, V. Neuhaus, J. H. Finke, C. Richter, T. Gothsch, A. Kwade, S. Büttgenbach, A. Braun, C. C. Müller-Goymann
In Vitro and ex Vivo Toxicological Testing of Sildenafil-Loaded Solid Lipid Nanoparticles
Inhalation Toxicology, Vol. 25, No. 9 (2013), 536-543
2013 – Bio- und Pharmapartikeltechnik
G. Gronau, Z. Qin, M.J. Buehler
Effect of Sodium Chloride On the Structure and Stability of Spider Silk’s N-Terminal Protein Domain
Biomaterials Science, Vol. 1, No. 3 (2013), 276-284
2013 – Bio- und Pharmapartikeltechnik
J.H. Finke, H. Schmolke, C.-P. Klages, C.C. Müller-Goymann
Controlling Solid Lipid Nanoparticle Adhesion by Polyelectrolyte Multilayer Surface Modifications
International Journal of Pharmaceutics, Vol. 449, No. 1-2 (2013), 59-71
2012 – Nanomaterialien
C. Grote, T. A. Cheema, G. Garnweitner
Comparative Study of Ligand Binding during the Postsynthetic Stabilization of Metal Oxide Nanoparticles
Langmuir, Vol. 28, No. 40 (2012),14395-14404
2012 – Nanomaterialien
T. Cheema, A. Lichtner, Ch. Weichert, M. Böl, G. Garnweitner
Fabrication of Transparent Polymer-Matrix Nanocomposites with Enhanced Mechanical Properties from Chemically Modified ZrO2 Nanoparticles
Journal of Materials Science, Vol. 47, No. 6 (2012), 2665-2674
2012 – Nanomaterialien
C. Grote, K. J. Chiad, D. Vollmer, G. Garnweitner
Unspecific Ligand Binding Yielding Stable Colloidal ITO-Nanoparticle Dispersions
Chemical Communications, Vol. 48, No. 10 (2012), 1464-1466
2012 – Zerkleinern
C. Schröder, A. Kwade
Einfluss der Prozesstemperatur bei der Zerkleinerung auf die Stabilität von anorganischen Nanosuspensionen
Chemie Ingenieur Technik, Vol. 84, No. 3 (2012), 279-285
2012 – Nanomaterialien
T. Cheema, G. Garnweitner
Herstellung von Nanokompositen mit optimierten Eigenschaften aus chemisch maßgeschneiderten Nanopartikeln
Chemie Ingenieur Technik, Vol. 84, No. 3 (2012), 301-308
2012 – Formulierungstechnik
N. Barth, C. Schilde, A. Kwade
Einfluss von Prozessparametern auf die mechanischen Eigenschaften von nanopartikulären Beschichtungen
Chemie Ingenieur Technik, Vol. 84, No. 3 (2012), 328-334
2012 – Formulierungstechnik
C. Schilde, A. Kwade
Measurement of the Micromechanical Properties of Nanostructured Aggregates via Nanoidentation
Journal of Materials Research, Vol. 27, No. 4 (2012), 672-684
2012 – Formulierungstechnik
C. Schilde, B. Westphal, A. Kwade
Effect of Primary Particle Morphology on the Micromechanical Properties of Nanostructured Alumina Agglomerates
Journal of Nanoparticle Research, Vol. 14, No. 3 (2012),
2012 – Nanomaterialien
D. Taroata, W.-J. Fischer, T.A. Cheema, G. Garnweitner, G. Schmid
High Integration Density Capacitors Directly Integrated in a Single Copper Layer of Printed Circuit Boards
IEEE Transactions of Dielectrics and Electrical Insulation, Vol. 19 (2012), 298-304
2012 – Nanomaterialien
I.-M. Grabs, C. Bradtmöller, D. Menzel, G. Garnweitner
Formation Mechanisms of Iron Oxide Nanoparticles in Different Nonaqueous Media
Crystal Growth & Design, Vol. 12, No. 3 (2012), 1469-1475
2012 – Nanomaterialien
M. Zimmermann, G. Garnweitner
Spontaneous Water Release Including Nucleation during the Nonaqueous Synthesis of TiO2 Nanoparticles
CrystEngComm, Vol 14, No. 24 (2012), 8562-8568
2012 – Formulierungstechnik
M. Roth, C. Schilde, P. Lellig, A. Kwade, G. K. Auernhammer
Simultaneous Nanoindentation and 3D Imaging on Semicrystalline Colloidal Films
Chemistry Letters, Vol. 41, No. 10 (2012), 1110-1112
2012 – Formulierungstechnik
M. Roth, C. Schilde, P. Lellig, A. Kwade, G. K. Auernhammer
Colloidal Aggregates Tested via Nanoidentation and Quasi-Simultaneous 3D Imaging
The European Physical Journal E, Vol. 35, No. 124 (2012), 1-12
2012 – Formulierungstechnik
J.H. Finke, J. Schur, C. Richter, T. Gothsch, A. Kwade, S. Büttgenbach, C.C. Müller-Goymann
The Influence of Costumized Geometries and Process Parameters on Nanoemulsion and Solid Lipid Nanoparticle Production in Microsystems
Chemical Engineering Journal, Vol. 209 (2012), 126-137
2012 – Zerkleinern
P. Wagener, M. Lau, S. Breitung-Faes, A.Kwade, S. Barcikowski
Physical Fabrication of Colloidal ZnO Nanoparticles Combining Wet-Grinding and Laser Fragementation
Applied Physics A - Materials Science & Processing, Vol. 108, No.4 (2012), 793-799
2012 – Batterieverfahrenstechnik
H.Y. Tran, G. Greco, C. Täubert, M. Wohlfahrt-Mehrens, W. Haselrieder, A. Kwade
Influence of Electrode Preparation on the Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Composite Electrodes for Lithium-Ion Batteries
Journal of Power Sources, Vol. 210 (2012), 276-285
2012 – Formulierungstechnik
H. Nolte, M. Lau, A. Kwade
Effect of Kneading Process Conditions on the Particle Fineness and the Polydispersity in Nanocomposites
Composites Science and Technology, Vol. 72, No. 9 (2012), 939-947
2012 – Formulierungstechnik
H. Nolte, A. Kwade
Determination of Particle Size Distributions and the Degree of Dispersion in Nanocomposites
Composites Science and Technology, Vol. 72, No. 9 (2012), 948-958
2012 – Formulierungstechnik
S. Beinert, T. Gothsch, A. Kwade
Numerical Evaluation of Flow Fields and Stresses Acting on Agglomerates Dispersed in High-Pressure Microsystems
Chemical Engineering & Technology, Vol. 35, No. 11 (2012), 1922-1930
2012 – Formulierungstechnik
S. Beinert, C. Schilde, A. Kwade
Simulation of Stress Energy and Grinding Media Movement within a Wet-Operated Annular-Gap Mill using the Diskrete-Element Method
Chemical Engineering & Technology, Vol. 35, No. 11 (2012), 1911-1921
2011 – Zerkleinern
S. Rosenkranz, S. Breitung-Faes, A. Kwade
Experimental Investigations and Modelling of the Ball Motion in Planetary Ball Mills
Powder Technology, Vol. 212, No. 1 (2011), 224-230
2011 – Formulierungstechnik
C. Schilde, C. Mages-Sauter, A. Kwade, H. P. Schuchmann
Efficiency of Different Dispersing Devices for Dispersing Nanosized Silica and Alumina
Powder Technology, Vol. 207, No. 1-3 (2011), 353-361
2011 – Formulierungstechnik
B. Schönstedt, G. Garnweitner, N. Barth, A. Mühlmeister, A. Kwade
Influence of Pyrogenic Particles on the Micromechanical Bahavior of Thin Sol-Gel Layers
Langmuir, Vol. 27, No.13 (2011), 8396-8403
2011 – Zerkleinern
S. Breitung-Faes, A. Kwade
Production of Transparent Suspensions by Real Grinding of Fused Corundum
Powder Technology, Vol. 212, No. 3 (2011), 383-388
2011 – Bio- und Pharmapartikeltechnik
A. Wargenau, A. Fleißner, C. J. Bolten, M. Rohde, I. Kampen, A. Kwade
On the Origin of the Electrostatic Surface Potential of Aspergillus Niger Spores in Acidic Environments
Research in Microbiology, Vol 162, No. 10 (2011), 1011-1017
2011 – Formulierungstechnik
C. Schilde, A. Beinert, A. Kwade
Comparison of the Micromechanical Aggregate Properties of Nanostructured Aggregates with the Stress Conditions During Stirred Media Milling
Chemical Engineering Science, Vol. 66, No. 21 (2011), 4943-4952
2011 – Formulierungstechnik
C. Günther, A. Kwade
Glänzend, kratzfest und flexibel - Funktionelle Sol-Gel-Beschichtung für flexible Substrate
Farbe und Lack, Vol. 117, No. 10 (2011), 30-34
2011 – Formulierungstechnik
B. Schönstedt, Th. Peterle, F. Weinelt
Flexible Protection - Sol-Gel System Enhances Hardness and Scratch Resistance of Plastic Films
European Coatings Journal, Vol. 11 (2011), 24-28
2011 – Zerkleinern
C. Eisermann, M.R. Mallembakam, C. Damm, W. Peukert, S. Breitung-Faes, A. Kwade
Polymeric Stabilization of Fused Corundum During Nanogrinding in Stirred Media Mills
Powder Technology, Vol. 212 (2011), 315-324
2011 – Nanomaterialien
T. Cheema, D. Taroata, G. Schmid, G. Garnweitner
Synthesis and Dispersion of Ultra-Small Binary and Ternary Metal Oxide Nanoparticles for Dielectric Thin Films
Materials Research Society Symposium Proceedings, Vol. 1303 (2011), 39-44
2011 – Nanomaterialien
D. Taroata, T. A. Cheema, W.-J. Fischer, G. Garnweitner, G. Schmid
Ceramic Thin Films for High Integration Density Capacitor Applications
Materials Research Society Symposium Proceedings, Vol. 1303 (2011), 117-122
2010 – Nanomaterialien
C. Grote, G. Garnweitner
Die nicht-wässrige Sol-Gel-Synthese - Eine Alternative für die Herstellung hochqualitativer Metalloxid-Nanopartikel
Chemie Ingenieur Technik, Vol. 82, No. 5 (2010), 615-622
2010 – Formulierungstechnik
C. Schilde, I. Kampen, A. Kwade
Dispersion Kinetics of Nano-Sized Particles for Different Dispersing Machines
Chemical Engineering Science, Vol. 65, No. 11 (2010), 3518/3527
2010 – Formulierungstechnik
C. Schilde, H. Nolte, C. Arlt, A. Kwade
Effect of Fluid-Particle-Interactions on Dispersing Nano-Particles in Epoxy Resins Using Stirred-Media-Mills and three-Roll-Mills
Composites Science and Technology, Vol. 70, No. 4 (2010), 657-663
2010 – Bio- und Pharmapartikeltechnik
A. Wargenau, A. Kwade
Determination of Adhesion between Single Aspergillus niger Spores in Aqueous Solutions Using an Atomic Force Microscope
Langmuir, Vol. 26, No. 13 (2010), 11071-11076
2010 – Bio- und Pharmapartikeltechnik
J. Arfsten, S. Leupold, C. Bradtmöller, I. Kampen, A. Kwade
Atomic Force Microscopy Studies on the Nanomechanical Properties of Saccharomyces Cerevisiae
Colloids and Surfaces B: Biointerfaces, Vol. 79, No. 1 (2010), 284-290
2010 – Bio- und Pharmapartikeltechnik
J. Knochen, U. Kunz, Th. Turek, S. Arndt, D. Scholl, I. Kampen, M. Vielkind, A. Kwade, S. Ceylan, A. Kirschning
µ-Konsortium: Aufbau einer mobilen Anlage für die Aus- und Weiterbildung in der Mikroverfahrenstechnik
Chemie Ingenieur Technik, Vol. 82, No. 10 (2010), 1799-1806
2010 – Nanomaterialien
G. Garnweitner, H. O. Ghareeb, C. Grote
Small-Molecule In Situ Stabilization of TiO2 Nanoparticles for the Facile Preparation of Stable Colloidal Dispersions
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 372, No. 1-3 (2010), 41-47
2010 – Formulierungstechnik
H. Nolte, C. Schilde, A. Kwade
Production of Highly Loaded Nanocomposites by Dispersing Nanoparticles in Epoxy Resin
Chemical Engineering and Technology, Vol. 33, No. 9 (2010), 1447-1455
2010 – Zerkleinern
C. Knieke, C. Steinborn, S. Romeis, W. Peukert, S. Breitung-Faes, A. Kwade
Nanoparticle Production with Stirred-Media Mills: Opportunities and Limits
Chemical Engineering and Technology, Vol. 33, No. 9 (2010), 1501-1411
2009 – Nanomaterialien
T. Ninjbadgar, G. Garnweitner, A. Börger, L. M. Goldenberg, A. V. Sakhno, J. Stumpe
Synthesis of Luminescent ZrO2:Eu3+ Nanoparticles and Their Holographic Sub-Micrometer Patterning in Polymer Composites
Advanced Functional Material, Vol. 19 (2009), 1819-1825
2009 – Nanomaterialien
G. Garnweitner, C. Grote
In Situ Investigation of Molecular Kinetics and Particle Formation of Water-Dispersible Titania Nanocrystals
Physical Chemistry Chemical Physics, Vol. 11, No. 19 (2009), 3767-3774
2009 – Formulierungstechnik
C. Schilde, T. Gothsch, K. Quarch, M. Kind, A. Kwade
Effect of Important Precipitation Process Parameters on the Redispersion Process and the Micromechanical Properties of Precipitated Silica
Chemical Engineering and Technology, Vol. 32 (2009), 1078-1087
2009 – Zerkleinern
S. Breitung-Faes, A. Kwade
Produktgestaltung bei der Nanozerkleinerung durch Einsatz kleinster Mahlkörper
Chemie Ingenieur Technik, Vol. 81, No. 6 (2009), 767-774
2009 – Bio- und Pharmapartikeltechnik
J. Arfsten, I. Kampen, A. Kwade
Mechanical Testing of Single Yeast Cells in Liquid Environment: Effect of the Extracellular Osmotic Conditions on the Failure Behavior
International Journal of Material Research, Vol. 100, No. 7 (2009), 978-983
2009 – Zerkleinern
S. Breitung-Faes, A. Kwade
Produktgestaltung bei der Nanozerkleinerung durch Einsatz kleinster Mahlkörper
Chemie Ingenieur Technik, Vol. 81, No. 6 (2009), 764-774
2009 – Zerkleinern
S. Breitung-Faes, A. Kwade
Herstellung transparenter α-Aluminiumoxidsuspensionen bei der Echtzerkleinerung in Rührwerkskugelmühlen
Quantachrome Partikelwelt, Vol. 11 (2009), 3-6
2008 – Nanomaterialien
G. Garnweitner, N. Tsedev, H. Dierke, M. Niederberger
Benzylamines as Versatile Agents for the One-Pot Synthesis and Highly Ordered Stacking of Anatase Nanoplatelets
European Journal of Inorganic Chemistry, No. 6 (2008), 890-895
2008 – Zerkleinern
S. Breitung-Faes, A. Kwade
Nano Particle Production in High-Power-Density Mills
Chemical Engineering Research and Design, Vol. 86, No. 4 (2008), 390-394
2008 – Nanomaterialien
G. Garnweitner, M. Niederberger
Organic Chemistry in Inorganic Nanomaterials Synthesis
Journal of Materials Chemistry, Vol. 18, No. 11 (2008), 1171-1182
2008 – Nanomaterialien
L. Zhang, G. Garnweitner, I. Djerdj, M. Antonietti, M. Niederberger
Generalized Nonaqueous Sol-Gel Synthesis of Different Transition-Metal Niobate Nanocrystals and Analysis of the Growth Mechanism
Chemistry - an Asian Journal, Vol. 3, No. 4 (2008), 746-752
2008 – Bio- und Pharmapartikeltechnik
J. Arfsten, C. Bradtmöller, I. Kampen, A. Kwade
Compressive Testing of Single Yeast Cells in Liquid Environment Using a Nanoindentation System
Journal of Materials Research, Vol. 23, No. 12 (2008), 3153-3160
2008 – Formulierungstechnik
M. Nadler, T. Mahrholz, U. Riedel, C. Schilde, A. Kwade
Preparation of Colloidal Carbon Nanotube Dispersions and Their Characterization Using a Disc Centrifuge
Carbon, Vol. 46, No. 11 (2008), 1384-1392
2008 – Nanomaterialien
I. Djerdj, G. Garnweitner, D. Arcon, M. Pregelj, Z. Jaglicic, M. Niederberger
Diluted Magnetic Semiconductors: Mn/Co-Doped ZnO Nanorods as Case Study
Journal of Materials Chemistry, Vol. 18, No. 43 (2008), 5208-5217
2007 – Zerkleinern
S. Breitung-Faes, A. Kwade
Einsatz unterschiedlicher Rührwerkskugelmühlen und Stabilisatoren für die Erzeugung von Nanopartikeln
Chemie Ingenieur Technik, Vol. 79, No. 3 (2007), 241-248
2007 – Nanomaterialien
G. Garnweitner, L. M. Goldenberg, O. V. Sakhno, M. Antonietti, M. Niederberger
Large-Scale Synthesis of Organophilic Zirconia Nanoparticles and their Application in Organic-Inorganic Nanocomposites for Efficient Volume Holography
Small Nano Micro, Vol. 3, No. 9 (2007), 1626-1632
2007 – Nanomaterialien
G. Garnweitner, S. Zhou, M. Niederberger, M. Antonietti
Dispersion Behavior of Zirconia Nanocrystals and their Surface Functionalization with Vinyl Group-Containing Ligands
Langmuir, Vol. 23, No. 18 (2007), 9178-9187
2007 – Granulare Medien und Feste Formen
F.-J. Barthold, J. Stieghan
Aspects on Shape and Parameter Sensitivity Analysis in the Theory of Porous Media
Proceedings in Applied Mathematics and Mechanics, Vol. 7 (2007), 406007/406008
2007 – Formulierungstechnik
C. Schilde, S. Breitung-Faes, A. Kwade
Dispersing and Grinding of Aluminia Nano Particles by Different Stress Mechanisms
ceramic forum international/Ber. DKG, Vol. 84, No. 13 (2007), 12-17
2006 – Formulierungstechnik
A. Kwade
Dispergieren und Zerkleinern von Nanopartikeln
Fortschrittsberichte der DKG, Vol. 20, No. 1 (2006), 24-33
2006 – Zerkleinern
S. Mende, J. Schwedes
Mechanical Production and Stabilization of Nanoparticles by Wet Comminution in Stirred Media Mills
Powder Handling and Processing, Vol. 18, No. 6 (2006), 366-373
2006 – Granulare Medien und Feste Formen
M. Röck, M. Ostendorf, J. Schwedes
Entwicklung eines einaxialen Verbackungstesters
Chemie Ingenieur Technik, Vol. 78, No. 6 (2006),739-741