2023
Freund, Raphael; Sallach, Fynn Matthis; Vietor, Thomas (2023)
"Design Freedoms of Lattice Structures for Interlock Bonding".
Dröder, Klaus and Vietor, Thomas, Future Automotive Production Conference 2022, Zukunftstechnologien für den multifunktionalen Leichtbau, 8, 156–169, Wiesbaden, Springer Fachmedien Wiesbaden
[DOI]
10.1007/978-3-658-39928-3_12
[ISBN] 978-3-658-39927-6
2022
Freund, Raphael; Koch, Stephan (2022)
"Mechanische Verankerung von Klebverbindungen".
adhäsion KLEBEN & DICHTEN, 66
(11), 36–39
[DOI]
10.1007/s35145-022-1134-5
2021
Freund, Raphael; Philipp, Dirk; Vietor, Thomas (2021)
"Additive Materialextrusion von Glas und mineralischen Materialien".
Lachmayer, Roland and Rettschlag, Katharina and Kaierle, Stefan, Konstruktion für die Additive Fertigung 2020, 1, 183–200, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-63030-3_10
[ISBN] 978-3-662-63029-7
Freund, Raphael; Koch, Stephan; Watschke, Hagen; Stammen, Elisabeth; Vietor, Thomas; Dilger, Klaus (2021)
"Utilization of additively manufactured lattice structures for increasing adhesive bonding using material extrusion".
The Journal of Adhesion, 235
(20), 1–22
[DOI]
10.1080/00218464.2021.1983431
Kuschmitz, Sebastian; Ring, Tobias P.; Watschke, Hagen; Langer, Sabine C.; Vietor, Thomas (2021)
"Design and Additive Manufacturing of Porous Sound Absorbers—A Machine-Learning Approach".
Materials, 14
(7), 1747
[DOI]
10.3390/ma14071747
Kuschmitz, Sebastian; Schirp, Arne; Busse, Johannes; Watschke, Hagen; Schirp, Claudia; Vietor, Thomas (2021)
"Development and Processing of Continuous Flax and Carbon Fiber-Reinforced Thermoplastic Composites by a Modified Material Extrusion Process".
Materials (Basel, Switzerland), 14
(9),
[DOI]
10.3390/ma14092332
[FILE]
http://www.ncbi.nlm.nih.gov/pubmed/33946263
Rothe, Sebastian; Blech, Christopher; Watschke, Hagen; Vietor, Thomas; Langer, Sabine C. (2021)
"Material Parameter Identification for Acoustic Simulation of Additively Manufactured Structures".
Materials, 14
(1), 168
[DOI]
10.3390/ma14010168
Watschke, Hagen; Goutier, Marijn; Heubach, Julius; Vietor, Thomas; Leichsenring, Kay; Böl, Markus (2021)
"Novel Resistive Sensor Design Utilizing the Geometric Freedom of Additive Manufacturing".
Applied Sciences, 11
(1), 113
[DOI]
10.3390/app11010113
2020
Fuchs, Daniel; Kuschmitz, Sebastian; Kühlke, Kevin; Vietor, Thomas (2020)
"Identifikation von Zielkonflikten bei der Anwendung von Potenzialen additiver Fertigungsverfahren".
Lachmayer, Roland and Rettschlag, Katharina and Kaierle, Stefan, Konstruktion für die Additive Fertigung 2019, 65, 223–244, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-61149-4_14
[ISBN] 978-3-662-61148-7
Hartogh, Peter; Vietor, Thomas (2020)
"Schnelle kostengerechte Bauteilgestaltung für die additive Fertigung".
Lachmayer, Roland and Lippert, Rene Bastian and Kaierle, Stefan, Konstruktion für die Additive Fertigung 2018, 23, 77–91, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-59058-4_5
[ISBN] 978-3-662-59057-7
Meißner, Paul; Watschke, Hagen; Winter, Jens; Vietor, Thomas (2020)
"Artificial Neural Networks-Based Material Parameter Identification for Numerical Simulations of Additively Manufactured Parts by Material Extrusion".
Polymers, 12
(12), 2949
[DOI]
10.3390/polym12122949
[FILE]
http://www.ncbi.nlm.nih.gov/pubmed/33321794
Watschke, Hagen; Gruhn, Hakon; Fischer, Vitali; Vietor, Thomas (2020)
"Verbesserung der Klebeignung von Polypropylen durch additiv gefertigte Oberflächenstrukturen und Multi-Material-Druck".
Lachmayer, Roland and Lippert, Rene Bastian and Kaierle, Stefan, Konstruktion für die Additive Fertigung 2018, 9, 263–281, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-59058-4_15
[ISBN] 978-3-662-59057-7
Watschke, Hagen; Türck, Eiko; Vietor, Thomas; Fischer, Vitali; Stammen, Elisabeth; Dilger, Klaus (2020)
"Additiv gefertigte Bauteile erfolgreich kleben – Teil 2: Konstruktive Maßnahmen zur Steigerung der Klebfestigkeit".
Schweissen & Schneiden, 72
(1), 30–35
2019
Fischer, Vitali; Stammen, Elisabeth; Dilger, Klaus; Watschke, Hagen; Türck, Eiko; Vietor, Thomas (2019)
"Additiv gefertigte Bauteile erfolgreich kleben – Teil 1: Verfahrensbedingte Einflüsse auf die Klebbarkeit".
Schweissen & Schneiden, 71
(12), 814–820
Freund, Raphael; Watschke, Hagen; Heubach, Julius; Vietor, Thomas (2019)
"Determination of Influencing Factors on Interface Strength of Additively Manufactured Multi-Material Parts by Material Extrusion".
Applied Sciences, 9
(9), 1782
[DOI]
10.3390/app9091782
Kuschmitz, Sebastian; Watschke, Hagen; Schumacher, Felix; Vietor, Thomas (2019)
"Bereitstellung von Lösungsprinzipien für die additive Fertigung zur Unterstützung der Bauteilkonzeption in der industriellen Praxis".
Kynast, Michael and Eichmann, Michael and Witt, Gerd, Rapid.Tech + FabCon 3.D International Hub for Additive Manufacturing: Exhibition + Conference + Networking, 75–88, München, Carl Hanser Verlag GmbH & Co. KG
[DOI]
10.3139/9783446462441.006
[ISBN] 978-3-446-46223-6
Rothe, Sebastian; Blech, Christopher; Watschke, Hagen; Vietor, Thomas; Langer, Sabine Christine (2019)
"Layer-effect by additive manufacturing of acoustic black holes".
Proceedings of inter-noise 2019 48th International Congress and Exposition on Noise Control Engineering, 3993–4998,
Schumacher, Felix; Watschke, Hagen; Kuschmitz, Sebastian; Vietor, Thomas (2019)
"Goal Oriented Provision of Design Principles for Additive Manufacturing to Support Conceptual Design".
Proceedings of the Design Society: International Conference on Engineering Design, 1
(1), 749–758
[DOI]
10.1017/dsi.2019.79
Watschke, Hagen; Hilbig, Karl; Vietor, Thomas (2019)
"Design and Characterization of Electrically Conductive Structures Additively Manufactured by Material Extrusion".
Applied Sciences, 9
(4), 779
[DOI]
10.3390/app9040779
Watschke, Hagen; Kuschmitz, Sebastian; Heubach, Julius; Lehne, Guido; Vietor, Thomas (2019)
"A Methodical Approach to Support Conceptual Design for Multi-Material Additive Manufacturing".
Proceedings of the Design Society: International Conference on Engineering Design, 1
(1), 659–668
[DOI]
10.1017/dsi.2019.70
2018
Hartogh, Peter; Vietor, Thomas (2018)
"Vorhersage der Fertigungszeit und -kosten für die additive Serienfertigung".
Lachmayer, Roland and Lippert, Rene Bastian and Kaierle, Stefan, Additive Serienfertigung, 22, 69–87, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-56463-9_5
[ISBN] 978-3-662-56462-2
Kumke, Martin; Watschke, Hagen; Hartogh, Peter; Bavendiek, Ann-Kathrin; Vietor, Thomas (2018)
"Methods and tools for identifying and leveraging additive manufacturing design potentials".
International Journal on Interactive Design and Manufacturing (IJIDeM), 12
(2), 481–493
[DOI]
10.1007/s12008-017-0399-7
Richter, Timo; Watschke, Hagen; Schumacher, Felix; Vietor, Thomas (2018)
"Exploitation of potentials of additive manufacturing in ideation workshops".
DS 89:~Proceedings of The Fifth International Conference on Design Creativity (ICDC2018), 354–361,
Ring, Tobias; Kuschmitz, Sebastian; Watschke, Hagen; Vietor, Thomas; Langer, Sabine Christine (2018)
"Additive Fertigung und Charakterisierung akustisch wirksamer Materialien".
Tagungsband DAGA 2018 - 44. Jahrestagung für Akustik, 451–545,
Rothe, Sebastian; Blech, Christopher; Watschke, Hagen; Vietor, Thomas; Langer, Sabine Christine (2018)
"Numerical modelling of additively manufactured acoustic black holes".
Proceedings of inter-noise 2018 47th International Congress and Exposition on Noise Control Engineering, 2137–2148,
Watschke, Hagen; Waalkes, Lennart; Schumacher, Christian; Vietor, Thomas (2018)
"Development of Novel Test Specimens for Characterization of Multi-Material Parts Manufactured by Material Extrusion".
Applied Sciences, 8
(8), 1220
[DOI]
10.3390/app8081220
2017
Hartogh, Peter; Vietor, Thomas (2017)
"Unterstützung des Entscheidungsprozesses in der Produktentwicklung additiv herzustellender Produkte mithilfe von Ähnlichkeitskennzahlen".
Lachmayer, Roland and Lippert, Rene Bastian, Additive Manufacturing Quantifiziert, 23, 49–68, Berlin, Heidelberg, Springer Berlin Heidelberg
[DOI]
10.1007/978-3-662-54113-5_4
[ISBN] 978-3-662-54112-8
Lopez-Arreguin, AJR; Linke, Stefan; Stoll, E; Freund, Raphael; Prziwara, PF; Voss, A; Schilde, C; Kwade, A; Homey, E; Schroeder, T; Wiehle, M; Thomas, D (2017)
"3D4 Space - Advanced Systems, Components, and Novel Methods for Planetary Exploration with Wheeled Mobile Robots".
Journal of Space Exploration, 6
(3),
[FILE]
https://www.tsijournals.com/abstract/3d4-space--advanced-systems-components-and…
[URL]
https://www.tsijournals.com/articles/3d4-space--advanced-systems-components-and…
Rothe, Sebastian; Watschke, Hagen; Langer, Sabine Christine (2017)
"Study on the producibility of additively manufactured acoustic black holes".
Proceedings of ICSV 24, 3208–3215,
[ISBN] 9781510845855
Watschke, Hagen; Bavendiek, Ann-Kathrin; Giannakos, Alexander; Vietor, Thomas (2017)
"A methodical approach to support ideation for additive manufacturing in design education".
Maier, Anja and Škec, Stanko and Kim, Harrison and Kokkolaras, Michael and Oehmen, Josef and Fadel, Georges and Salustri, Filippo and Van der Loss, Mike, DS 87-5 Proceedings of the 21st International Conference on Engineering Design (ICED 17), 041–050, Glasgow, The Design Society
[ISBN] 978-1-904670-93-3
Watschke, Hagen; Rautenberg, Daniel; Waalkes, Lennart; Junior, Christine Susanne; Vietor, Thomas (2017)
"Integration leitfähiger Funktionen mittels Fused Layer Modeling".
Kynast, Michael and Eichmann, Michael and Witt, Gerd, Rapid.Tech - International Trade Show et Conference for Additive Manufacturing, 419–432, München, Carl Hanser Verlag
[ISBN] 978-3-446-45459-0
2016
Kumke, Martin; Watschke, Hagen; Vietor, Thomas (2016)
"A new methodological framework for design for additive manufacturing".
Virtual and Physical Prototyping, 11
(1), 3–19
[DOI]
10.1080/17452759.2016.1139377
Richter, Timo; Watschke, Hagen; Inkermann, David; Vietor, Thomas (2016)
"Produktarchitekturgestaltung unter Berücksichtigung additiver Fertigungsverfahren".
Stelzer, Ralph, Entwerfen Entwickeln Erleben 2016, 375–390, Dresden, TUDpress
[ISBN] 978-3-95908-062-0
Watschke, Hagen; Kumke, Martin; Vietor, Thomas (2016)
"Design for Additive Manufacturing – Praxisnahe Hilfsmittel zur Identifikation und Nutzung konstruktiver Freiheiten".
Brökel, Klaus and Feldhusen, Jörg and Grote, Karl-Heinrich and Rieg, Frank and Stelzer, Ralph and Köhler, Peter and Müller, Norbert and Scharr, Gerhard, 14. Gemeinsames Kolloquium Konstruktionstechnik 2016, Berichte aus der Konstruktionstechnik, 38–46, Aachen, Shaker Verlag
[ISBN] 978-3-8440-4732-5
2015
Prüß, Hauke; Vietor, Thomas (2015)
"Design for Fiber-Reinforced Additive Manufacturing".
Journal of Mechanical Design, 137
(11), 248
[DOI]
10.1115/1.4030993
2011
Kirchner, Karsten (2011)
"Entwicklung eines Informationssystems für den effizienten Einsatz generativer Fertigungsverfahren im Produktentwicklungsprozess: Dissertation".
Dr. Hut, München
[ISBN] 978-3-8439-0212-0
