Veröffentlichungen

Alexander Thewes, Phillip Marvin Reinders, Hanno Paschke, Tristan Brückner, Daniel Templin, Stefan Lechner, Sören Müller, Michael Paulus, Christian Sternemann

Surface modifications to reduce wear in hot extrusion of copper

ScienceDirect, ELSEVIER, Wear, Volumes 548-549, 15 June 2024, 205358 

Lars Bröcker, Tristan Winzer, Nickolas Steppan, Jan Benedikt, Claus-Peter Klages

Plasma polymerization of allyltrimethylsilane with single‐filament dielectric‐barrier discharges — Evidence of cationic surface processes

Plasma Process Polym. 2023;e2300177

Phillip Marvin Reinders, Günter Bräuer

A model to predict the s-phase thickness and the change in corrosion behavior toward H₂SO₄ of 316L austenitic stainless steel after plasma nitriding

Surface & Coatings Technology 475 (2023) 130135

Christian Kipp, P. Kaestner, G. Bräuer

Influence of increased voltage on the nitriding zone during plasma nitriding

Einfluss erhöhter Spannung auf die Nitrierzone beim Plasmanitrieren

Materialwiss. Werkstofftech. 2023;54:1176–8

Claus-Peter Klages, Ralf Bandorf, Holger Gerdes, Antje Jung, Vitaly Raev

Immersion infrared reflection‐absorption spectroscopy studies on diamond‐like carbon surfaces. I. Formation of electrophilic groups on surfaces of amorphous carbon films aging in ambient air

Plasma Process Polym. 2023;e2300123

Claus-Peter Klages, Lars Bröcker, Meret Leonie Betz, Vitaly Raev 

Post-discharges with Small Initial O₂ Fractions: Plug-Flow Model and Experiments

Plasma Chemistry and Plasma Processing, Volume 43, pages 285–314 (2023)

Claus-Peter Klages, Antje Jung, Meret Leonie Betz, Vitaly Raev 

Low-Temperature Plasma Oxidation of Aluminum by Ar-O₂ Mixtures in a Dielectric-Barrier Discharge Reactor

Plasma Chemistry and Plasma Processing (2023)

Stefan Lechner, Alexander Thewes, Sören Müller

Reduction of Friction and Adhesion in Copper and Brass Extrusion by Application of Boron Containing Surface Modifications

TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings pp 394–405

https://link.springer.com/chapter/10.1007/978-3-031-22524-6_36

Germán González, Marcel Plogmeyer, Julius Schoop, Günter Bräuer, Volker Schulze

In‑situ characterization of tool temperatures using in‑tool integrated
thermoresistive thin‑film sensors

Production Engineering (2023) 17:319–328

Alexander Thewes, Lars Bröcker, Emmanuel Tetteh, Kofi George, Günter Bräuer, Michael Paulus, Christian Sternemann, Hanno Paschke, Tristan Brückner, Stefan Lechner, Sören Müller

Ti-Si-B-C-N plasma enhanced chemical vapor deposition nanocomposite coatings for high temperature applications

Elsevier, Thin Solid Films, Volume 760, 31 October 2022, 139507

M. Plogmeyer, G. González, V. Schulze, G. Bräuer

Temperatur-, Kraft- und Verschleißmessung zur Digitalisierung von Zerspanungsprozessen
Werkzeugintegrierte Dünnschichtsensorik

WT WERKSTATTSTECHNIK BD. 112 (2022) NR. 11-12

Germán González , Florian Sauer, Marcel Plogmeyer, Michael Gerstenmeyer, Günter Bräuer, Volker Schulze

Effect of thermomechanical loads and nanocrystalline layer formation on induced surface hardening during orthogonal cutting of AISI 4140

ScienceDirect Procedia CIRP 108 (2022) 228–233  

Musekamp, J.; Hoche H.; Schmitt, T.; Reinders, P. M.; Oechsner, M.; Kaestner, P.; Bräuer, G.,

Einfluss von Werkstoffzustand und chemischer Zusammensetzung auf die Eigenschaften plasmanitrierter austenitischer Stähle.

In: Materialwissenschaft und Werkstofftechnik 52, 2021, S. 177-192.

DOI: https://doi.org/10.1002/mawe.202000027 

Detlef Loffhagen, Markus M. Becker, Andreas K. Czerny, Claus-Peter Klages

Modeling of Atmospheric-Pressure Dielectric Barrier Discharges in Argon with Small Admixtures of Tetramethylsilane

Plasma Chemistry and Plasma Processing 41, 289 - 334 (2021)

Detlef Loffhagen et al.

Wolfgang Tillmann, Diego Grisales, Dominic Stangier, Carl-Arne Thomann, Jörg Debus, Alexander Nienhaus, Daniel Apel

Residual stresses and tribomechanical behaviour of TiAlN and TiAlCN monolayer and multilayer coatings by DCMS and HiPIMS

Surface and Coatings Technology Volume 406, 2021

https://www.sciencedirect.com/science/article/abs/pii/S0257897220313347?via%3Dihub

Wolfgang Tillmann, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, Hilke Oltmanns, Manfred Kietzmann, Jessica Meißner, Maxwell Hein, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Alexander Nienhaus, Carl Arne Thomann, Jörg Debus 

Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V

Surface and Coatings Technology Volume 421, 20211

https://www.sciencedirect.com/science/article/abs/pii/S0257897221005582?via%3Dihub

Lars Bröcker, Gesa S. Perlick, Claus-Peter Klages

Evidence of ionic film deposition from single‐filament dielectric barrier discharges in Ar–HMDSO mixtures

Plasma Process Polym. 2020;e2000129

Claus-Peter Klages, Andris Martinovs, Lars Bröcker, Detlef Loffhagen

Does the energy transfer from Ar(1s) atoms to N₂ lead to dissociation?

Plasma Process Polym. 2020;e2000070

Claus‐Peter Klages, Vitaly Raev, Divagar Murugan, Vemulakonda Venkata Raghavendra Sai

Argon–water DBD pretreatment and vapor‐phase silanization of silica: Comparison with wet‐chemical processes

Plasma Process Polym. 2020;e1900265

Claus‐Peter Klages

A chemical‐kinetic model of DBDs in Ar‐H₂O mixtures

Plasma Process Polym. 2020, e2000028

Loffhagen, Detlef ; Becker, Markus M. ; Hegemann, Dirk; Nisol, Bernard; Watson, Sean; Wertheimer, Michael R.; Klages, Claus-Peter,

Large-area atmospheric pressure dielectric barrier discharges in Ar-HMDSO mixtures: Experiments and fluid Modelling,

Plasma Processes And Polymers, Volume 17 Issue 2 (2020) 

Reinders, Phillip Marvin; Patel, Rohit Roopchand; Kaestner, Peter; Bräuer, Günter,

Ein Diffusionsmodell für Plasmanitrierprozesse austenitischer Stähle.

In: Vakuum in Forschung und Praxis 32 (2020) 6, S. 38 - 41.

DOI: https://doi.org/10.1002/vipr.202000750 

Reinders, P.M.; Patel R.R.; Musekamp, J.; Kaestner, P.; Hoche H.; Bräuer, G.; Oechsner, M,

Determination of the s-phase formation coefficient of plasma nitrided austenitic steel.

In: Materialwissenschaft und Werkstofftechnik 52, 2020, S. 193-201.

DOI: https://doi.org/10.1002/mawe.202000029 

Braeuer, Guenter,

12th Asian-European International Conference on Plasma Surface Engineering,

Vakuum In Forschung Und Praxis, Volume 31 Issue 6 (2019) 52-52

Grein, Maria ; Gerstenberg, Jessica ; von der Heide, Chresten; Bandorf, Ralf; Braeuer, Guenter; Dietzel, Andreas,

Niobium-Containing DLC Coatings on Various Substrates for Strain Gauges,

Coatings, Volume 9 Issue 7 (2019)

Grein, M. ; Bandorf, R. ; Schiffinann, K.; Braeuer, G.,

Material structure and piezoresistive properties of niobium containing diamond-like-carbon films,

Surface & Coatings Technology, Volume 357 (2019) 273-279

Loffhagen, Detlef ; Becker, Markus M. ; Czerny, Andreas K.; Philipp, Jens; Klages, Claus-Peter,

Impact of hexamethyldisiloxane admixtures on the discharge characteristics of a dielectric barrier discharge in argon for thin film deposition,

Contributions To Plasma Physics, Volume 58 Issue 5 (2018) 337- 352

Khosravi, Zohreh ; Kotula, Stefan ; Lippitz, Andreas; Unger, Wolfgang E. S.; Klages, Claus-Peter,

IR- and NEXAFS-spectroscopic characterization of plasma-nitrogenated polyolefin surfaces,

Plasma Processes And Polymers, Volume 15 Issue 1 (2018)

Krasnorutskyi, Sergii ; Kipp, Christian ; Hensel, Jonas; Kaestner, Peter; Hartwig, Sven; Braeuer, Guenter; Dilger, Klaus,

Metallurgical investigation of electron beam welded duplex stainless steel X2CrNiMoN22-5-3 with plasma

nitrided weld edge surfaces,

Materials Testing, Volume 60 Issue 6 (2018) 577-582

K. Nikolov, P. Kaestner, C.-P. Klages, S. Puls, B. Schuhmacher,

Low-pressure diffusion chromising of thin low-carbon steel sheet for improved surface and bulk properties,

Journal of Alloys and Compounds 692 (2017) 101-107

K. Nikolov, K. Bunk, A. Jung, J.W. Gerlach, P. Kaestner, C.-P. Klages,

Combined plasma surface modification of austenitic stainless steel for bipolar plates,

Surface and Coatings Technology 328 (2017) 142-151

S. Krasnorutskyi, C. Kipp, J. Hensel, P. Kaestner, G. Bräuer, K. Dilger,

Metallurgical investigation of electron beam welded Duplex Stainless Steel X2CrNiMoN22-5-3 with plasma nitrided weld edge surfaces,

Materials Testing, (2017)

G.-P. Ostermeyer, G. Bräuer, J. Merlis, P. Kaestner, C. Kipp,

Multiphysics of Tribocontacts,

Applied Mathematics and Mechanics (2017)

Klages, Claus-Peter ; Czerny, Andreas K. ; Philipp, Jens; Becker, Markus M.; Loffhagen, Detlef,

DBD-based plasma polymerization from monomer-argon mixtures: Analytical model of monomer reactions with excited argon species,

Plasma Processes And Polymers, Volume 14 Issue 12 (2017)

Kotula, Stefan ; Luedemann, Maik ; Philipp, Jens; Thomas, Michael; Klages, Claus-Peter,

Plasma nitrogenation of polymer surfaces with a new type of combinatorial plasma-printing reactor,

Plasma Processes And Polymers, Volume 14 Issue 8 (2017)

Klages, Claus-Peter ; Kotula, Stefan,

Critical remarks on chemical derivatization analysis of plasma-treated polymer surfaces and plasma polymers,

Plasma Processes And Polymers, Volume 13 Issue 12 (2016) 1213-1223

Vasanthakumari, Priyanka ; Khosravi, Zohreh ; Sai, V. V. R.; Klages, Claus-Peter,

PMMA Surface Functionalization Using Atmospheric Pressure Plasma for Development of Plasmonically Active

Polymer Optical Fiber Probes,

Plasma Chemistry And Plasma Processing, Volume 36 Issue 4 (2016) 1067-1083

Philipp, Jens ; Czerny, Andreas K. ; Klages, Claus-Peter,

Plasma Polymerization at Atmospheric Pressure with a New Type of DBD Reactor for Combinatorial Studies:

Classification of Precursor Concentration Dependencies,

Plasma Processes And Polymers, Volume 13 Issue 5 (2016) 509-520

Pathak, Anshuma ; Bora, Achyut ; Liao, Kung-Ching; Schmolke, Hannah; Jung, Antje; Klages, Claus-Peter; Schwartz, Jeffrey; Tornow, Marc,

Disorder-derived, strong tunneling attenuation in bis-phosphonate monolayers,

Journal Of Physics-Condensed Matter, Volume 28 Issue 9 (2016)

Hecht, Lars ; Philipp, Jens ; Mattern, Kai; Dietzel, Andreas; Klages, Claus-Peter,

Controlling wettability in paper by atmospheric-pressure microplasma processes to be used in mu PAD fabrication,

Microfluidics And Nanofluidics, Volume 20 Issue 1 (2016)

Philipp, J. ; Klages, C. -P.,

Effect Of Metastable-Driven Film Deposition On Growth-Rate Profiles,

Hakone Xv: International Symposium On High Pressure Low Temperature Plasma Chemistry, (2016) 266-269

Eichler, M. ; Dillmann, H. ; Nagel, K.; Klages, C. -P.,

Control of Direct Bonding Behavior by Interlayers,

Ecs Transactions, Volume 75 Issue 9 (2016) 137-144

Krause, Andreas ; Weirauch, Rene ; Braeuer, Guenter; Stonis, Malte; Behrens, Bernd-Arno,

Analysis of the friction behavior of DLC in warm bulk forming by using the ring compression test,

Production Engineering-Research And Development, Volume 9 Issue 1 (2015)

K. Nikolov, K. Bunk, A. Jung, P. Kaestner, G. Bräuer, C.-P. Klages,

High-efficient surface modification of thin austenitic stainless steel sheets applying short-time plasma nitriding by means of strip hollow cathode method for plasma thermochemical treatment,

Vacuum 110 (2014)  106-113

J. Biehler, H. Hoche, M. Oechsner, P. Kaestner, K. Bunk, G. Bräuer,

Influence of the Microstructure on the Corrosion Resistance of Plasma-Nitrided Austenitic Stainless Steel 304L and 316L,

Mat. Science and Engineering Technology 10 (2014), 45, 930-946

K. Nikolov, K. Köster, P. Kaestner, G. Bräuer, C.-P. Klages,

Strip hollow cathode method for plasma thermochemical treatment for surface modification of thin metal strips: Plasma nitriding of austenitic stainless steel sheets for bipolar plates,

Vacuum 102 (2014) 31-37

K. Nikolov, K. Bunk, A. Jung, P. Kaestner, G. Bräuer, C.-P. Klages, High-efficient surface odification of thin austenitic stainless steel sheets applying short-time plasma nitriding by means of strip hollow cathode method for plasma thermochemical treatment,

Vacuum 110 (2014) 106-113

J. Biehler, H. Hoche, M. Oechsner, P. Kaestner, K. Bunk, G. Bräuer,

Influence of the microstructure on the corrosion resistance of plasma-nitrided austenitic stainless steel 304L and 316L,

Mat.-wiss. u. Werkstofftech. (2014) 45, No. 10

Peterat, Gena ; Schmolke, Hannah ; Lorenz, Thomas; Llobera, Andreu; Rasch, Detlev; Al-Halhouli, Ala'aldeen T.; Dietzel, Andreas; Buettgenbach, Stephanus; Klages, Claus-Peter; Krull, Rainer,

Characterization of Oxygen Transfer in Vertical Microbubble Columns for Aerobic Biotechnological Processes,

Biotechnology And Bioengineering, Volume 111 Issue 9 (2014) 1809-1819

Khosravi, Zohreh ; Klages, Claus-Peter,

Nucleophilic Derivatization of Polyethylene Surfaces Treated in Ambient-Pressure N-2-H-2 DBD Post Discharges,

Plasma Chemistry And Plasma Processing, Volume 34 Issue 3 (2014) 661-669

Hartwig, Sven ; Klages, Claus-Peter,

Ordered 2D Nanopores in Nickel Electrodeposits-A Self-Organization Phenomenon,

Journal Of The Electrochemical Society, Volume 161 Issue 5 (2014) D243-D247

Eichler, M. ; Dillmann, H. ; Reim, L. C.; Thomas, M.; Klages, C. -P.,

Temporary Wafer Bonding by Polyelectrolyte Interlayers,

Ecs Transactions, Volume 64 Issue 5 (2014) 179-186

K. Köster, P. Kaestner, G. Bräuer, H. Hoche, T. Troßmann, M. Oechsner,

Material condition tailored to plasma nitriding process for ensuring corrosion and wear resistance of austenitic stainless steel,

Surface and Coatings Technology 228 (2013)  615-618

J. Biehler, H. Hoche, M. Oechsner, P. Kaestner, K. Bunk, G. Bräuer,

Einfluss der durch Umformung und Oberflächenbearbeitung bedingten Gefügeänderungen austenitischer Stähle,

Praktische Metallographie 45 (2013) 177-182

Klages, Claus-Peter ; Hinze, Alena ; Khosravi, Zohreh,

Nitrogen Plasma Modification and Chemical Derivatization of Polyethylene Surfaces - An In Situ Study Using

FTIR-ATR Spectroscopy,

Plasma Processes And Polymers, Volume 10 Issue 11 (2013) 948-958

Finke, Jan Henrik ; Schmolke, Hannah ; Klages, C. -P.; Mueller-Goymann, Christel C.,

Controlling solid lipid nanoparticle adhesion by polyelectrolyte multilayer surface modifications,

International Journal Of Pharmaceutics, Volume 449 Issue 1-2 (2013) 59-71

Klages, Claus-Peter ; Khosravi, Zohreh ; Hinze, Alena,

Some Remarks on Chemical Derivatization of Polymer Surfaces after Exposure to Nitrogen-Containing Plasmas,

Plasma Processes And Polymers, Volume 10 Issue 4 (2013) 307-312

Hinze, Alena ; Marchesseault, Andrew ; Buettgenbach, Stephanus; Thomas, Michael; Klages, Claus-Peter,

Combinatorial Plasma-based Surface Modification of Polymers by Means of Plasma Printing with Gas-Carrying

Plasma Stamps at Ambient Pressure,

Atmospheric Pressure Plasma Treatment Of Polymers: Relevance To Adhesion, (2013) 3-25

Thomas, Michael ; Eichler, Marko ; Lachmann, Kristina; Borris, Jochen; Hinze, Alena; Klages, Claus-Peter,

Adhesion Improvement by Nitrogen Functionalization of Polymers Using DBD-based Plasma Sources at Ambient

Pressure,

Atmospheric Pressure Plasma Treatment Of Polymers: Relevance To Adhesion, (2013) 251-273

Petersen, M. ; Bandorf, R. ; Braeuer, G.; Klages, C-P.,

Diamond-like carbon films as piezoresistors in highly sensitive force sensors,

Diamond And Related Materials, Volume 26 (2012) 50-54

Eils, Nadine K. ; Mechnich, Peter ; Keune, Hartmut; Wahl, Georg; Klages, Claus-Peter,

Single-Step Fabrication of Nanolamellar Structured Oxide Ceramic Coatings by Metal-Organic Chemical Vapor Deposition,

Journal Of Nanoscience And Nanotechnology, Volume 11 Issue 9 (2011) 8396-8402

Schindhelm, J. ; Giza, M. ; Nikolov, K.; Weiher, N.; Schuhmacher, B.; Klages, C-P.,

Combination of zinc alloy coating with thin plasma polymer films for novel corrosion protective systems on coated steel,

Surface & Coatings Technology, Volume 205 (2011) S137-S140

Schmolke, Hannah ; Hartwig, Sven ; Klages, Claus-Peter,

Poly(acrylic acid)-graft-poly(ethylene glycol) preparation and adsorption on polyelectrolyte multilayers (PEMs) for custom-made antiadhesive surfaces,

Physica Status Solidi A-Applications And Materials Science, Volume 208 Issue 6 (2011) 1290-1300

Demming, Stefanie ; Lesche, Claudia ; Schmolke, Hannah; Klages, Claus-Peter; Buettgenbach, Stephanus,

Characterization of long-term stability of hydrophilized PEG-grafted PDMS within different media for biotechnological and pharmaceutical applications,

Physica status solidi a-applications and materials science, Volume 208 issue 6 (2011) 1301-1307

Petersen, Mirjana ; Heckmann, Ulrike ; Bandorf, Ralf; Gwozdz, Virginia; Schnabel, Stephan; Braeuer, Guenter; Klages, Claus-Peter,

Me-DLC films as material for highly sensitive temperature compensated strain gauges,

Diamond And Related Materials, Volume 20 Issue 5-6 (2011) 814-818

Nikolov, Krasimir ; Schuhmacher, Bernd ; Jung, Thomas; Klages, Claus-Peter,

Plasma-enhanced High Rate Surface Treatment of Steel Sheet by Means of the Strip Hollow Cathode Method,

Vakuum in Forschung und Praxis, Volume 23 Issue 2 (2011) 23-29

Klages, Claus-Peter ; Hartwig, Sven ; Schmolke, Hannah,

Adsorption of Poly(Acrylic Acid)-Graft-Poly(Ethylene Glycol) on Polyelectrolyte Multilayers,

Progress In Colloid And Polymer Science, Volume 138 (2011) 95-101

H. Paschke, M. Weber, P. Kaestner , G. Braeuer,

Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests, Surface & Coatings Technology 205 (2010) 1465–1469

H. Paschke, M. Weber, P. Kaestner, G. Braeuer,

Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests,

Surface & Coatings Technology 205 (2010) 1465–1469

Schmolke, Hannah ; Demming, Stefanie ; Edlich, Astrid; Magdanz, Veronika; Buettgenbach, Stephanus; Franco-Lara, Ezequiel; Krull, Rainer; Klages,

Claus-Peter,

Polyelectrolyte multilayer surface functionalization of poly(dimethylsiloxane) (PDMS) for reduction of yeast cell

adhesion in microfluidic devices,

Biomicrofluidics, Volume 4 Issue 4 (2010)

Eils, Nadine K. ; Mechnich, Peter ; Schmuecker, Martin; Keune, Hartmut; Wahl, Georg; Klages, Claus-Peter,

Nanolaminated Alumina Coatings Deposited by Metal-Organic Chemical Vapor Deposition,

Journal Of The American Ceramic Society, Volume 93 Issue 10 (2010) 3512-3516

Klages, Claus-Peter ; Hinze, Alena ; Willich, Peter; Thomas, Michael,

Atmospheric-Pressure Plasma Amination of Polymer Surfaces,

Journal Of Adhesion Science And Technology, Volume 24 Issue 6 (2010) 1167-1180

Eichler, Marko ; Michel, Benedikt ; Gabriel, Markus; Klages, Claus-Peter,

Micro Plasma Processes for MEMS Packaging,

Vakuum in Forschung und Praxis, Volume 21 Issue 4 (2009) 6-9 Published 2009

Michel, Benedikt ; Eichler, Marko ; Klages, Claus-Peter,

Investigations on the Effect of Dielectric Barrier Discharge (DBD) Treatment as a Preconditioning Method for Low

Temperature Silicon Wafer Bonding,

Plasma Processes And Polymers, Volume 6 (2009) S173-S177

Lucas, Nina ; Franke, Raimo ; Hinze, Alena; Klages, Claus-Peter; Frank, Ronald; Buettgenbach, Stephanus,

Microplasma Stamps for Area-Selective Modification of Polymer Surfaces,

Plasma Processes And Polymers, Volume 6 (2009) S370-S374

Lachmann, Kristina ; Michel, Benedikt ; Klages, Claus-Peter,

Density and Aging Behavior of Primary Amino Groups on Afterglow Plasma-Treated Low-Density Polyethylene

(LDPE),

Plasma Processes And Polymers, Volume 6 (2009) S401-S405

P. Kaestner, T. Michler, H. Weidner, K.-T. Rie, G. Bräuer,

Plasma nitrided austenitic stainless steels for automotive hydrogen applications,

Surface & Coatings Technology 203 (2008) 897–900

Eichler, M. ; Michel, B. ; Thomas, M.; Gabriel, M.; Klages, C. -P.,

Atmospheric-pressure plasma pretreatment for direct bonding of silicon wafers at low temperatures,

Surface & Coatings Technology, Volume 203 Issue 5-7 (2008) 826-829

Lucas, N. ; Hinze, A. ; Klages, C-P; Buettgenbach, S.,

Design and optimization of dielectric barrier discharge microplasma stamps,

Journal Of Physics D-Applied Physics, Volume 41 Issue 19 (2008)

Hinze, Alena ; Klages, Claus-Peter ; Zaenker, Antje; Thomas, Michael; Wirth, Thomas; Unger, Wolfgang E. S.,

ToF-SIMS imaging of DBD-plasma-printed microspots on BOPP substrates,

Plasma Processes And Polymers, Volume 5 Issue 5 (2008) 460-470

Klages, Claus-Peter ; Grishin, Artur,

Quantitative ATR FT-IR analysis of chemically derivatized plasma-modified polymer surfaces,

Plasma Processes And Polymers, Volume 5 Issue 4 (2008) 359-367

Klages, Claus-Peter ; Grishin, Artur,

Plasma amination of low-density polyethylene by DBD afterglows at atmospheric pressure,

Plasma Processes And Polymers, Volume 5 Issue 4 (2008) 368-376

K.S. Klimek, A. Gebauer-Teichmann, P. Kaestner, K.-T. Rie,

Duplex-PACVD coating of surfaces for die casting tools,

Surface & Coatings Technology 201 (2007) 5628–5632

Klages, Claus-Peter ; Hinze, Alena ; Lachmann, Kristina; Berger, Claudia; Borris, Jochen; Eichler, Marko; von Hausen, Margret; Zaenker, Antje; Thomas,

Michael,

Surface technology with cold microplasmas,

Plasma Processes And Polymers, Volume 4 Issue 3 (2007) 208-218

K. S. Klimek, A. Gebauer-Teichmann, G. Röders, P. Kaestner, K.-T. Rie,

Innovationen durch PACVD Duplex Schichtsysteme im Leichtmetall-Druckguss, Mat.-wiss. u. Werkstofftech. (2006) 37, No. 1

P. Kaestner , J. Olfe, J.-W. He, K.-T. Rie,

Improvement in the load-bearing capacity and adhesion of TiC coatings on TiAl6V4 by duplex treatment,

Surface and Coatings Technology 142-144 (2001) 928-933

P. Kaestner, J. Olfe, K.-T. Rie,

Plasma-assisted boriding of pure titanium and TiAl6V4,

Surface and Coatings Technology 142-144 (2001) 248-252