Publikationen

Agarwal S., Sane L., Fernandes X. R., Shu B.; MID-IR laser absorption spectroscopy of 1- and 2-butanol in a shock tube facility. Combustion and Flame (2022)
Ahuis M., Doose S., Vogt D., Michalowski P., Zellmer S., Kwade A.; Recycling of solid-state batteries. Nature Energy (2024)
Alihussein H., Prasannakumar A., Geier M., Krafczyk M.; Direct cumulant lattice Boltzmann simulations of transitional flow in gyroidal structures including experimental validation. Computers & Mathematics with Applications (2024)
Asaro S., Lüer L., Bauknecht A.; Experimental load modification on a dual-slot circulation control airfoil. Exp Fluids (2022)
Bajrami J., Zimmermann P., Dinkelacker F.; Experimental investigation and modeling of boundary layer flashback for non-swirling premixed prevaporized n-propanol/air and /isopropanol/air flames. Proceedings of the Combustion Institute (2024)
Barke A., Bley T., Thies C., Weckenborg C., Spengler S. T.; Are Sustainable Aviation Fuels a Viable Option for Decarbonizing Air Transport in Europe? An Environmental and Economic Sustainability Assessment. Applied Sciences (2022)
Barke A., Cistjakov W., Steckermeier D., Thies C., Popien J., Michalowski P., Melo P. S., Cerdas F., Herrmann C., Krewer U., Kwade A., Spengler S. T.; Green batteries for clean skies: Sustainability assessment of lithium‐sulfur all‐solid‐state batteries for electric aircraft. Journal of Industrial Ecology (2022)
Bauer S. R., Inkermann D.; SELECTION OF MODEL APPROACHES AND MODELLING METHODS FOR LIFETIME PROGNOSIS. Proceedings of the Design Society (2023)
Beyer Y., Steen M., Hecker P.; Boosted Incremental Nonlinear Dynamic Inversion for Flexible Airplane Gust Load Alleviation. Journal of Guidance, Control, and Dynamics (2024)
Beyer Y., Steen M., Hecker P.; Incremental Passive Fault-Tolerant Control for Quadrotors Subjected to Complete Rotor Failures. Journal of Guidance, Control, and Dynamics (2023)
Beyer Y., Ullah J., Steen M., Hecker P.; Unsteady Nonlinear Lifting Line Model for Active Gust Load Alleviation of Airplanes. CEAS Aeronautical Journal (2024)
Blech C., Appel K. C., Ewert R., Delfs W. J., Langer C. S.; Numerical prediction of passenger cabin noise due to jet noise by an ultra–high–bypass ratio engine. Journal of Sound and Vibration (2020)
Bordekar H., Cersullo N., Brysch M., Philipp J., Hühne C.; eXplainable artificial intelligence for automatic defect detection in additively manufactured parts using CT scan analysis. Journal of Intelligent Manufacturing (2023)
Bramsiepe K., Klimmek T., Krüger W., Tichy L.; Aeroelastic method to investigate nonlinear elastic wing structures. CEAS Aeronaut J (2022)
Broek d. v. S., Wolff J., Scheffler S., Hühne C., Rolfes R.; Improving the fatigue life of printed structures using stochastic variations. Prog Addit Manuf (2022)
Broihan J., Nozinski I., Pöch N., Helber S.; Designing Dynamic Inductive Charging Infrastructures for Airport Aprons with Multiple Vehicle Types. Energies (2022)
Canders W., Hoffmann J., Henke M.; Cooling Technologies for High Power Density Electrical Machines for Aviation Applications. Energies (2019)
Cao Y., Lyu H., Mertens A.; Mission profile-based operation strategies to improve the reliability of an ANPC inverter in future electrified aircraft propulsion systems. IEEE Transportation Electrification Conference and Expo (ITEC) (2024)
Cavaliere D., Fezans N.; Toward Automated Gust Load Alleviation Control Design via Discrete Gust Impulse Filters. Journal of Guidance, Control, and Dynamics (2024)
Cerbe F., Mahlstedt D., Sinapius M., Hühne C., Böl M.; Relationship between programming stress and residual strain in FDM 4D printing. Progress in Additive Manufacturing (2023)
Cistjakov W., Laue V., Röder F., Krewer U.; Assessment of Core-Shell and Agglomerate Particle Design for All-Solid-State Batteries. J. Electrochem. Soc. (2022)
Corno J., Georg N., Gorgi Zadeh S., Heller J., Gubarev V., Roggen T., Römer U., Schmidt C., Schöps S., Schultz J., Sulimov A., Rienen v. U.; Uncertainty modeling and analysis of the European X-ray free electron laser cavities manufacturing process. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (2020)
Domogalla V., Bertsch L., Plohr M., Stumpf E., Spakovszky S. Z.; Low-Noise Design of Medium-Range Aircraft for Energy Efficient Aviation. Aerospace (2021)
Drögemüller P., Stobbe T., Schröder U.; Closing the Gap: Towards a Fully Continuous and Self‐Regulated Kolbe Electrosynthesis. ChemSusChem (2023)
Dähne S., Werthen E., Zerbst D., Tönjes L., Traub H., Hühne C.; Lightworks, a scientific research framework for the design of stiffened composite-panel structures using gradient-based optimization. Structural and Multidisciplinary Optimization (2024)
Düssler S., Siebert F., Bauknecht A.; Coandă-Type Flow Actuation for Load Alleviation. Journal of Aircraft (2022)
Ebersberger J., Fauth L., Keuter R., Cao Y., Freund Y., Hanke-Rauschenbach R., Ponick B., Mertens A., Friebe J.; Power Distribution and Propulsion System for an All-Electric Short-Range Commuter Aircraft—A Case Study. IEEE Access (2022)
Ebersberger J., Hagedorn M., Lorenz M., Mertens A.; Potentials and Comparison of Inverter Topologies for Future All-Electric Aircraft Propulsion. IEEE J. Emerg. Sel. Topics Power Electron. (2022)
Francis-Xavier F., Kubannek F., Schenkendorf R.; Hybrid Process Models in Electrochemical Syntheses under Deep Uncertainty. Processes (2021)
Förster P., Yildiz B., Feuerle T., Hecker P.; Approach for Cost Functions for the Use in Trade-Off Investigations Assessing the Environmental Impact of a Future Energy Efficient European Aviation. Aerospace (2022)
Garbo A., Parekh J., Rischmann T., Bekemeyer P.; Multi-Fidelity Adaptive Sampling for Surrogate-Based Optimization and Uncertainty Quantification.. Aerospace (2024)
Geier M., Alihussein H.; Computation of Implicit Representation of Volumetric Shells with Predefined Thickness. Algorithms (2021)
Gerstenberg J., Steckermeier D., Kwade A., Michalowski P.; Effect of Mixing Intensity on Electrochemical Performance of Oxide/Sulfide Composite Electrolytes. Batteries (2024)
Goldmann A., Dinkelacker F.; Approximation of laminar flame characteristics on premixed ammonia/hydrogen/nitrogen/air mixtures at elevated temperatures and pressures. Fuel (2018)
Goldmann A., Dinkelacker F.; Experimental investigation and modeling of boundary layer flashback for non-swirling premixed hydrogen/ammonia/air flames. Combustion and Flame (2021)
Goldmann A., Dinkelacker F.; Investigation of boundary layer flashback for non-swirling premixed hydrogen/ammonia/nitrogen/oxygen/air flames. Combustion and Flame (2022)
Goldmann A., Sauter W., Oettinger M., Kluge T., Schröder U., Seume J., Friedrichs J., Dinkelacker F.; A Study on Electrofuels in Aviation. Energies (2018)
Greco F. G., Bertsch L., Ring P. T., Langer C. S.; Sound quality assessment of a medium-range aircraft with enhanced fan-noise shielding design. CEAS Aeronaut J (2021)
Greco F. G., Guruprasad M. S., Ring P. T., Langer C. S.; The impact of the COVID-19 outbreak on the air traffic noise at the Hannover airport region. The Journal of the Acoustical Society of America (2022)
Greco F. G., Yildiz B., Göing J., Ring P. T., Feuerle T., Hecker P., Langer C. S.; Environmental Noise Assessment of Holding Approach Procedures Using a Multi-Level Simulation Framework. Aerospace (2022)
Gronau S., Hoelzen J., Mueller T., Hanke-Rauschenbach R.; Hydrogen-powered aviation in Germany: A macroeconomic perspective and methodological approach of fuel supply chain integration into an economy-wide dataset. International Journal of Hydrogen Energy (2022)
Gröhlich M., Böswald M., Wallaschek J.; Viscoelastic damping design – A novel approach for shape optimization of Constrained Layer Damping treatments at different ambient temperatures. Journal of Sound and Vibration (2023)
Gröhlich M., Lang A., Böswald M., Meier J.; Viscoelastic damping design – Thermal impact on a constrained layer damping treatment. Materials & Design (2021)
Guschakowski M., Schröder U.; Direct and Indirect Electrooxidation of Glycerol to Value‐Added Products. ChemSusChem (2021)
Hahn D., Haupt M.; Exploration of the effect of wing component post-buckling on bending-twist coupling for nonlinear wing twist. CEAS Aeronaut J (2022)
Hansknecht C., Joormann I., Korn B., Morscheck F., Stiller S.; Feeder routing for air-to-air refueling operations. European Journal of Operational Research (2023)
Hansknecht C., Joormann I., Stiller S.; Dynamic Shortest Paths Methods for the Time-Dependent TSP. Algorithms (2021)
He X., Wang Q., Fernandes R., Shu B.; Investigation on the autoignition characteristics of propanol and butanol isomers under diluted lean conditions for stratified low temperature combustion. Combustion and Flame (2022)
Henke M., Hoffmann J., Waschke L.; Modulare Entwicklungsplattform für elektrische Luftfahrtantriebe. ARGESIM Report (2020)
Hoelzen J., Flohr M., Silberhorn D., Mangold J., Bensmann A., Hanke-Rauschenbach R.; H2-powered aviation at airports – Design and economics of LH2 refueling systems. Energy Conversion and Management: X (2022)
Hoelzen J., Koenemann L., Kistner L., Schenke F., Bensmann A., Hanke-Rauschenbach R.; H2-powered aviation – Design and economics of green LH2 supply for airports. Energy Conversion and Management (2023)
Hoelzen J., Silberhorn D., Zill T., Bensmann B., Hanke-Rauschenbach R.; Hydrogen-powered aviation and its reliance on green hydrogen infrastructure – Review and research gaps. International Journal of Hydrogen Energy (2022)
Hoffmann J., Canders W., Henke M.; Design Study for a Superconducting High-Power Fan Drive for a Long-Range Aircraft. Energies (2024)
Hoffmann J., Canders W., Henke M.; Impact of Current Density and Cooling on the Weight Balance of Electrical Propulsion Drives for Aviation. Energies (2020)
Hojny C., Joormann I., Lüthen H., Schmidt M.; Mixed-integer programming techniques for the connected max-k-cut problem. Math. Prog. Comp. (2020)
Hon S. K., Karpuk S., Yang D., Elham A.; Development of a Flight Simulator for Conceptual Aircraft Design and Sizing. Transactions on Aerospace Research (2022)
Hüpel Y., Blech C., Sreekumar K. H., Langer C. S.; Efficient solutions of preconditioned large‐scale systems for simulative aircraft cabin noise assessment. Proc Appl Math and Mech: 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (2023)
Inkermann D.; Lifecycle Option Selection in Early Design Stages Based on Degradation Model Evaluation. Proceedings of the Design Society (2022)
Iyer V., Petersen J., Geier S., Wierach P.; Design and Characterization of Poly(ethylene oxide)-Based Multifunctional Composites with Succinonitrile Fillers for Ambient-Temperature Structural Sodium-Ion Batteries. Polymers (2024)
Iyer V., Petersen J., Geier S., Wierach P.; Development and Multifunctional Characterization of a Structural Sodium-Ion Battery Using a High-Tensile-Strength Poly(ethylene oxide)-Based Matrix Composite. ACS Appl. Energy Mater. (2024)
Jean-Fulcrand A., Jeon J. E., Karimpour S., Garnweitner G.; Cross-Linked Solid Polymer-Based Catholyte for Solid-State Lithium-Sulfur Batteries. Batteries (2023)
Jeon J. E., Haidar S., Helmers L., Kwade A., Garnweitner G.; Ion-conductive vs. non-ion-conductive ceramic fillers in silane-linked polyethylene oxide-based composite polymer electrolytes with high room-temperature ionic conductivity. Energy Advances (2024)
Jeon J. E., Jean-Fulcrand A., Kwade A., Garnweitner G.; A room-temperature high performance all-solid-state lithium-sulfur battery enabled by a cross-linked copolymer@ceramic hybrid solid electrolyte. Nano Energy (2022)
Kallina V., Hasché F., Oezaslan M.; Advanced design of electrospun nanofiber cathode catalyst layers for PEM fuel cells at low humidity. Current Opinion in Electrochemistry (2024)
Karpuk S., Elham A.; Assessment of Potential Commercial Success of Business Jets with Natural Laminar Flow. Journal of Aircraft (2023)
Karpuk S., Elham A.; Comparative study of hydrogen and kerosene commercial aircraft with advanced airframe and propulsion technologies for more sustainable aviation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering (2022)
Karpuk S., Elham A.; Influence of Novel Airframe Technologies on the Feasibility of Fully-Electric Regional Aviation. Aerospace (2021)
Karpuk S., Liu Y., Elham A.; Multi-Fidelity Design Optimization of a Long-Range Blended Wing Body Aircraft with New Airframe Technologies. Aerospace (2020)
Karpuk S., Ma Y., Elham A.; Design Investigation of Potential Long-Range Hydrogen Combustion Blended Wing Body Aircraft with Future Technologies. Aerospace (2023)
Karpuk S., Radespiel R., Elham A.; Assessment of Future Airframe and Propulsion Technologies on Sustainability of Next-Generation Mid-Range Aircraft. Aerospace (2022)
Keuter J. R., Kirsch B., Friedrichs J., Ponick B.; Design Decisions for a Powertrain Combination of Electric Motor and Propeller for an Electric Aircraft. IEEE Access (2023)
Keuter J. R., Niebuhr F., Nozinski M., Krüger E., Kabelac S., Ponick B.; Design of a Direct-Liquid-Cooled Motor and Operation Strategy for the Cooling System. Energies (2023)
Khalil K., Asaro S., Bauknecht A.; Active Flow Control Devices for Wing Load Alleviation. Journal of Aircraft (2021)
Khalil K., Bauknecht A.; Fluidic Flow Control Devices for Gust Load Alleviation. Journal of Aircraft (2024)
Kukuk A., Paschke A., Serrer J.; Die Planfestellung beim Aufbau einer Wasserstoffinfrastruktur an deutschen Flughäfen ZLW - Zeitschrift für Luft- und Weltraumrecht (2024)
Kösters L., Gao X.; Safety considerations and time constant determined extended operations for fuel cell-powered aircrafts. CEAS Aeronaut J (2021)
Kösters L. T., Liu X., Kožulović D., Wang S., Friedrichs J., Gao X.; Comparison of phase-change-heat-pump cooling and liquid cooling for PEM fuel cells for MW-level aviation propulsion. International Journal of Hydrogen Energy (2022)
Kösters L. T., Schweinitz v. G. A., Heere M., Friedrichs J., Gao X.; Experimental study and simulations of hydrogen cooling effectiveness for aviation PEM fuel cells. Scientific Reports (2023)
Lenger M., Heinke S., Tegethoff W., Köhler J.; On the importance of liquid hydrogen exergy utilisation for an energetically efficient hydrogen energy economy. International Journal of Hydrogen Energy (2024)
Lenk T., Rabet S., Sprick M., Raabe G., Schröder U.; Insight into the Interaction of Furfural with Metallic Surfaces in the Electrochemical Hydrogenation Process. ChemPhysChem (2022)
Lenk T., Rueß V., Gresch J., Schröder U.; Exploring the electrochemical ring hydrogenation of furanic compounds. Green Chem. (2023)
Lenk T., Schröder U.; An experimental guide to in operando electrochemical Raman spectroscopy. J Solid State Electrochem (2023)
Li M., He X., Hashemi H., Glarborg P., Lowe M. V., Marshall P., Fernandes R., Shu B.; An experimental and modeling study on auto-ignition kinetics of ammonia/methanol mixtures at intermediate temperature and high pressure. Combustion and Flame (2022)
Li M., Liu J., Nachtigal P., Mimic D.; Pore-scale investigation of water-gas transport in reconstructed gas diffusion layers with binder and polytetrafluoroethylene coating. Journal of Power Sources (2024)
Liu J., Li M., Yang Y., Schlüter N., Mimic D., Schröder D.; Tailored Porous Transport Layers for Optimal Oxygen Transport in Water Electrolyzers: Combined Stochastic Reconstruction and Lattice Boltzmann Method. ChemPhysChem (2023)
Lobitz L., Traub H., Overbeck M., Bień M., Heimbs S., Hühne C., Friedrichs J., Horst P.; Aircraft Wing Design for Extended Hybrid Laminar Flow Control. Aerospace (2023)
Lohuis D., Traub H., Hühne C.; Mechanical testing of threaded inserts for additively manufactured sandwich panels with Gyroid core structures. Results in Materials (2024)
Lück S., Göing J., Wittmann T., Mimic D., Friedrichs J.; Towards design- and operating-point selection for fuel cell cathode air-supply systems in aviation. JGPP - International Journal of Gas Turbine, Propulsion and Power Systems (2024)
Lüdeke H., Soldenhoff v. R.; Direct numerical simulation of TS-waves over suction panel steps from manufacturing tolerances. CEAS Aeronaut J (2021)
Melo P. S., Barke A., Cerdas F., Thies C., Mennenga M., Spengler S. T., Herrmann C.; Sustainability Assessment and Engineering of Emerging Aircraft Technologies—Challenges, Methods and Tools. Sustainability (2020)
Melo P. S., Toghyani S., Cerdas F., Liu X., Gao X., Lindner L., Barke A., Thies C., Spengler S. T., Herrmann C.; Model-based assessment of the environmental impacts of fuel cell systems designed for eVTOLs. International Journal of Hydrogen Energy (2023)
Metz L., Mutzel P., Niemann T., Schürmann L., Stiller S., Tillmann M. A.; Delay-resistant robust vehicle routing with heterogeneous time windows. Computers & Operations Research (2024)
Meyer P., Hühne C., Bramsiepe K., Krüger W.; Aeroelastic Analysis of Actuated Adaptive Wingtips Based on Pressure Actuation. Journal of Aircraft (2024)
Meyer P., Traub H., Hühne C.; Actuated adaptive wingtips on transport aircraft: Requirements and preliminary design using pressure-actuated cellular structures. Aerospace Science and Technology (2022)
Monkam K. L., Schweinitz v. G. A., Friedrichs J., Gao X.; Feasibility analysis of a new thermal insulation concept of cryogenic fuel tanks for hydrogen fuel cell powered commercial aircraft. International Journal of Hydrogen Energy (2022)
Montano Z., Seidler M., Riemenschneider J., Friedrichs J.; A Coupling Method for the Design of Shape-Adaptive Compressor Blades. Applied Mechanics (2022)
Mosca V., Elham A.; Investigations on the Potentials of Novel Technologies for Aircraft Fuel Burn Reduction through Aerostructural Optimisation. Aerospace (2022)
Mosca V., Karpuk S., Sudhi A., Badrya C., Elham A.; Multidisciplinary design optimisation of a fully electric regional aircraft wing with active flow control technology. Aeronaut. j. (2021)
Mosca V., Sudhi A., Badrya C., Elham A.; Multidisciplinary Design Optimization of Transonic Wings with Boundary-Layer Suction. Journal of Aircraft (2023)
Mozuni M., Ohlhoff M., Glatzel G., ; User Research im Zukunftsorientiertem Design-Thinking: Eine Ganzheitliche Methode für das Stakeholder-Management in der Service-Optimierung. (2021)
Mueller T., Gronau S.; Fostering Macroeconomic Research on Hydrogen-Powered Aviation: A Systematic Literature Review on General Equilibrium Models. Energies (2023)
Munirathinam B., Lerch L., Hüne D., Lentz L., Lenk T., Görke M., Garnweitner G., Schlüter N., Kubannek F., Schröder D., Gimpel T.; Enhanced Performance of Laser‐Structured Copper Electrodes Towards Electrocatalytic Hydrogenation of Furfural. ChemElectroChem (2022)
Munirathinam B., Schlüter N., Schröder D.; Recent Advances in Metallic Catalyst Materials for Electrochemical Upgrading of Furfurals to <i>Drop‐in</i> Biofuels: A Mini Review. Energy Tech (2023)
Nadiri S., Shu B., Goldsmith F. C., Fernandes R.; Development of comprehensive kinetic models of ammonia/methanol ignition using Reaction Mechanism Generator (RMG). Combustion and Flame (2023)
Nadiri S., Zimmermann P., Sane L., Fernandes R., Dinkelacker F., Shu B.; Kinetic Modeling Study on the Combustion Characterization of Synthetic C3 and C4 Alcohols for Lean Premixed Prevaporized Combustion. Energies (2021)
Nicolay S., Karpuk S., Liu Y., Elham A.; Conceptual design and optimization of a general aviation aircraft with fuel cells and hydrogen. International Journal of Hydrogen Energy (2021)
Nöding M., Bertsch L.; Application of Noise Certification Regulations within Conceptual Aircraft Design. Aerospace (2021)
Ohlhoff M., Mozuni M., Glatzel G.; Szenarien Machen Mögliche Zukünfte Erlebbar Szenen eines Forschungsvorhabens. (2021)
Overbeck M., Heimbs S., Kube J., Hühne C.; Energy Absorption Properties of 3D-Printed Polymeric Gyroid Structures for an Aircraft Wing Leading Edge. Aerospace (2024)
Parekh J., Bekemeyer P., Helm S., Francois G. D., Grabe C.; Surrogate Based Design Space Exploration and Exploitation for an Efficient Airfoil Optimization under Uncertainties using Transition Models. Aerospace Science and Technology (2024)
Petersen J., Kube A., Geier S., Wierach P.; Structure-Integrated Thin-Film Supercapacitor as a Sensor. Sensors (2022)
Prasannakumar A., Sudhi A., Seitz A., Badrya C.; Design of Hybrid-Laminar-Flow-Control Wing and Suction System for Transonic Midrange Aircraft. Journal of Aircraft (2023)
Prasannakumar A., Wolff J., Radespiel R., Boermans L., Hühne C., Badrya C.; Design and power calculation of HLFC suction system for a subsonic short-range aircraft. CEAS Aeronaut J (2022)
Pöch N., Nozinski I., Broihan J., Helber S.; Numerical Study on Planning Inductive Charging Infrastructures for Electric Service Vehicles on Airport Aprons. Energies (2022)
Rabet S., Raabe G.; Comparison of the GAFF, OPLSAA and CHARMM27 force field for the reproduction of the thermodynamics properties of furfural, 2-methylfuran, 2,5-dimethylfuran and 5-hydroxymethylfurfural. Fluid Phase Equilibria (2022)
Rabet S., Tobaschus W., Chung G., Gimpel T., Raabe G., Schröder D., Munirathinam B.; Exploring Impurity Effects and Catalyst Surface Features in Furfural Electroreduction for Jet Fuel Precursor Production: Experimental and Molecular Dynamics Insights. ChemElectroChem (2024)
Rehbein C. M., Guschakowski M., Sauter W., Kunz J., Schröder U., Scholl S.; Liquid–Liquid Equilibrium Data and Continuous Process Concept for the Electrosynthesis of Valeric Acid from Levulinic Acid. Front. Energy Res. (2020)
Rejas M. Z., Seidler M., Riemenschneider J., Friedrichs J.; Aerodynamic validation for compressor blades’ structural morphing concepts. CEAS Aeronaut J (2022)
Roche J., Friebe J., Niggemann O.; Neural Network Modeling of Nonlinear Filters for EMC Simulation in Discrete Time Domain. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society (2021)
Rolinck M., Gellrich S., Bode C., Mennenga M., Cerdas F., Friedrichs J., Herrmann C.; A Concept for Blockchain-Based LCA and its Application in the Context of Aircraft MRO. Procedia CIRP (2021)
Römer, Bertsch U., Mulani L., Schaeffer B. S., Beat; Aeroacoustics research in europe: The ceas-asc report on 2022 highlights, contribution: Uncertainty quantification for aircraft noise emission simulation: methods and limitations. Journal of Sound and Vibration (2023)
Römer U., Bertsch L., Mulani B. S., Schäffer B.; Uncertainty Quantification for Aircraft Noise Emission Simulation: Methods and Limitations. AIAA Journal (2022)
Römer U., Bollhöfer M., Sreekumar H., Blech C., Langer C. S.; An adaptive sparse grid rational Arnoldi method for uncertainty quantification of dynamical systems in the frequency domain. Numerical Meth Engineering (2021)
Schefer H., Canders W., Hoffmann J., Mallwitz R., Henke M.; Cryogenically-Cooled Power Electronics for Long-Distance Aircraft. IEEE Access (2022)
Schefer H., Fauth L., Kopp H. T., Mallwitz R., Friebe J., Kurrat M.; Discussion on Electric Power Supply Systems for All Electric Aircraft. IEEE Access (2020)
Schweinitz v. G. A., Gao X.; Modeling of corona discharge thrusters powered by PEM fuel cells: An investigation of potential synergies. International Journal of Hydrogen Energy (2020)
Seidler M., Bode C., Friedrichs J.; Effect of Blade Reference Design Variations on the Morphing Capability of a Shape-Adaptive Fan Rotor. JGPP (2024)
Seidler M., Montano Z., Mimic D., Meinicke N., Friedrichs J., Riemenschneider J., Seume R. J.; Combining shape-adaptive blades and active flow control in a multi-stage axial compressor: a numerical study. CEAS Aeronautical Journal (2024)
Sprengholz M., Traub H., Sinapius M., Dähne S., Hühne C.; Rapid transformation of lamination parameters into stacking sequences. Composite Structures (2021)
Sudhi A., Elham A., Badrya C.; Coupled Boundary-Layer Suction and Airfoil Optimization for Hybrid Laminar Flow Control. AIAA Journal (2021)
Sudhi A., Radespiel R., Badrya C.; Design Exploration of Transonic Airfoils for Natural and Hybrid Laminar Flow Control Applications. Journal of Aircraft (2023)
Talwar C., Joormann I., Ginster R., Spengler S. T.; How much can electric aircraft contribute to reaching the Flightpath 2050 CO2 emissions goal? A system dynamics approach for european short haul flights. Journal of Air Transport Management (2023)
Thel S., Hahn D., Haupt M., Heimbs S.; A passive load alleviation aircraft wing: topology optimization for maximizing nonlinear bending–torsion coupling. Struct Multidisc Optim (2022)
Thies C., Kieckhäfer K., Spengler S. T.; Activity analysis based modeling of global supply chains for sustainability assessment. J Bus Econ (2020)
Tillmann M. A., Joormann I., Ammann L. C. S.; Reproducible Air Passenger Demand Estimation. Journal of Air Transport Management (2023)
Toghyani S., Atyabi A. S., Gao X.; Enhancing the Specific Power of a PEM Fuel Cell Powered UAV with a Novel Bean-Shaped Flow Field. Energies (2021)
Toghyani S., Baakes F., Zhang N., Kühnelt H., Cistjakov W., Krewer U.; Model-Based Design of High Energy All-Solid-State Li Batteries with Hybrid Electrolytes. Journal of Electrochemical Society (2022)
Toghyani S., Cistjakov W., Baakes F., Krewer U.; Conceptual Design of Solid-State Li-Battery for Urban Air Mobility. Journal of The Electrochemical Society (2023)
Vogt D., Michalowski P., Kwade A.; Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries (2022)
Voigt J., Friedrichs J.; Development of a Multi-Segment Parallel Compressor Model for a Boundary Layer Ingesting Fuselage Fan Stage. Energies (2021)
Wang Q., Laguna G. A., He X., Shu B., Li L.; Investigation on the Ignition Properties of 1-Propanol and 1-Butanol under Fuel-Lean Conditions. SAE Technical Paper (2021)
Wilde A., Wanielik F., Rolinck M., Mennenga M., Abraham T., Cerdas F., Herrmann C.; Ontology-based approach to support life cycle engineering: Development of a data and knowledge structure. Procedia CIRP (2022)
Willamowski L. J. F., Tillmann M. A.; Minimizing Airplane Boarding Time. Transportation Science (2022)
Wittenberg D., Paschke A., Kukuk A., Pannek J.; Information Requirements and Legal Framework for Multimodal Transport System Coordination. Logistics (2024)
Yildiz B., Förster P., Langner J., Feuerle T., Hecker P.; A Hybrid Gate-to-Gate Simulation Environment for the Air Traffic System. Aerospace (2023)
Zhu L., Wang S., Sui P., Gao X.; Multiscale modeling of an angled gas diffusion layer for polymer electrolyte membrane fuel cells: Performance enhancing for aviation applications. International Journal of Hydrogen Energy (2021)
Zhu L., Yang W., Xiao L., Zhang H., Gao X., Sui P.; Stochastically Modeled Gas Diffusion Layers: Effects of Binder and Polytetrafluoroethylene on Effective Gas Diffusivity. Journal of the Electrochemical Society (2021)
Zhu L., Zhang H., Xiao L., Bazylak A., Gao X., Sui P.; Pore-scale modeling of gas diffusion layers: Effects of compression on transport properties. Journal of Power Sources (2021)
Zimmermann P., Bajrami J., Dinkelacker F.; Validation of a Generic Non-Swirled Multi-Fuel Burner for the Measurement of Flame Stability Limits for Research of Advanced Sustainable Aviation Fuels. Energies (2023)