Publikationen

Agarwal S., Sane L., Fernandes X. R., Shu B.; MID-IR laser absorption spectroscopy of 1- and 2-butanol in a shock tube facility. Combustion and Flame (2022)
Al-Kharabsheh D., Geese A., Müller R.; Der Aufbau des Forschungsclubs changING: ingenieurdidaktisches Konzept auf Basis der Interessens- und Selbstwirksamkeit (2022)
Al-Kharabsheh D., Geese A., Müller R.; Setting-up a research club for high school students: an engineering educational concept based on increasing both interest and self-efficacy. Barcelona: Universitat Politècnica de Catalunya (2022)
Asaro S., Lüer L., Bauknecht A.; Experimental Characterization of a Dual-Slot Coandă Actuator for Load Reduction. AIAA (2022)
Asaro S., Lüer L., Bauknecht A.; Experimental load modification on a dual-slot circulation control airfoil. Exp Fluids (2022)
Barke A., Bley T., Thies C., Weckenborg C., Spengler S. T.; Are Sustainable Aviation Fuels a Viable Option for Decarbonizing Air Transport in Europe? An Environmental and Economic Sustainability Assessment. Applied Sciences (2022)
Barke A., Cistjakov W., Steckermeier D., Thies C., Popien J., Michalowski P., Melo P. S., Cerdas F., Herrmann C., Krewer U., Kwade A., Spengler S. T.; Green batteries for clean skies: Sustainability assessment of lithium‐sulfur all‐solid‐state batteries for electric aircraft. Journal of Industrial Ecology (2022)
Barke A., Thies C., Melo P. S., Cerdas F., Herrmann C., Spengler S. T.; Comparison of conventional and electric passenger aircraft for short-haul flights – A life cycle sustainability assessment. (2022)
Bauknecht A., Beyer Y., Schultz J., Asaro S., Khalil K., Römer U., Steen M., Cavaliere D., Fezans N.; Novel Concepts for Active Load Alleviation. (2022)
Beckemeier C., Friebe J.; Novel current balancing method for HF interleaved converters with reduced control effort IEEE (2022)
Beyer Y., Gücker F., Bremers E., Steen M., Hecker P.; Incremental Passive Fault-Tolerant Control for Quadrotors With up to Three Successive Rotor Failures CEAS (2022)
Bramsiepe K., Braune M., Krüger W., Tichy L.; Wind Tunnel Experiment with an EPP-Wing to Investigate Aeroelastic Effects of Nonlinear Elastic Stiffnesses (2022)
Bramsiepe K., Klimmek T., Krüger W., Tichy L.; Aeroelastic method to investigate nonlinear elastic wing structures. CEAS Aeronaut J (2022)
Bramsiepe R. K., Gröhlich M., Dähne S., Hahn D.; Structural Concepts for Passive Load Alleviation. AIAA SCITECH Forum (2022)
Broek d. v. S., Wolff J., Scheffler S., Hühne C., Rolfes R.; Improving the fatigue life of printed structures using stochastic variations. Prog Addit Manuf (2022)
Broihan J., Nozinski I., Pöch N., Helber S.; Designing Dynamic Inductive Charging Infrastructures for Airport Aprons with Multiple Vehicle Types. Energies (2022)
Cao Y., Fauth L., Friebe J., Mertens A.; Potentials to Improve the Post-Fault Performance of a Fault-Tolerant Inverter System in Electrified Aircraft Propulsion System IEEE (2022)
Cavaliere, Fezans u. D., Nicolas; Recasting Discrete 1-Cosine Gust Requirements as Frequency Domain Specifications for Load Alleviation Control Design NVvL (2022)
Cavaliere D., Fezans N.; Recasting Discrete 1-Cosine Gust Load Criteria as Frequency-domain Specifications for Load Alleviation Control Design IFASD (2022)
Cavaliere D., Fezans N., Kiehn D.; Method to Account for Estimator-Induced Previewed Information Losses -- Application to Synthesis of Lidar-Based Gust Load Alleviation Functions CEAS, Technische Universität Berlin, Germany (2022)
Cavaliere D., Fezans N., Kiehn D., Quero D., Vrancken P.; Gust Load Control Design Challenge Including Lidar Wind Measurements and Based on the Common Research Model. AIAA (2022)
Cistjakov W., Laue V., Röder F., Krewer U.; Assessment of Core-Shell and Agglomerate Particle Design for All-Solid-State Batteries. J. Electrochem. Soc. (2022)
Dinkelacker, F.; Visionen für zukünftige Luftfahrtantriebe Cuvillier Verlag Göttingen (2022)
Duivenvoorden R., Suard N., Sinnige T., Veldhuis L. L.; Experimental Investigation of Aerodynamic Interactions of a Wing with Deployed Fowler Flap under Influence of a Propeller Slipstream. AIAA (2022)
Dähne S., Steffen O., Kosmann J., Hühne C.; AN AUTOMATED ASSESSEMENT TOOL OF NLF CRITERIA FORAIRFRAME JOINTS. DGLR (2022)
Düssler S., Siebert F., Bauknecht A.; Coandă-Type Flow Actuation for Load Alleviation. Journal of Aircraft (2022)
Ebersberger J., Fauth L., Keuter R., Cao Y., Freund Y., Hanke-Rauschenbach R., Ponick B., Mertens A., Friebe J.; Power Distribution and Propulsion System for an All-Electric Short-Range Commuter Aircraft—A Case Study. IEEE Access (2022)
Ebersberger J., Hagedorn M., Lorenz M., Mertens A.; Potentials and Comparison of Inverter Topologies for Future All-Electric Aircraft Propulsion. IEEE J. Emerg. Sel. Topics Power Electron. (2022)
Franco A., Moessner M., Ewert R., Delfs J.; Fast Non-Empiric Tonal Noise Prediction Model for Installed Propulsors. (2022)
Friedrichs J., Elham A., Hühne C., Radespiel R., Bauknecht A.; Vehicle Technologies towards Sustainable and Energy Efficient Aviation. AIAA (2022)
Förster P., Yildiz B., Feuerle T., Hecker P.; Approach for Cost Functions for the Use in Trade-Off Investigations Assessing the Environmental Impact of a Future Energy Efficient European Aviation. Aerospace (2022)
Geese A., Al-Kharabsheh D., Müller R.; MINT-Begeisterung wecken, fördern und halten - zwei Beispiele für außerschulische Lernangebote Fachverbandes der Deutschen Physikalischen Gesellschaft (2022)
Geier S., Petersen J., Wierach P.; Challenges of Upscaling Power Composites for Aerospace Applications. The American Society of Mechanical Engineers (2022)
Goldmann A., Dinkelacker F.; Investigation of boundary layer flashback for non-swirling premixed hydrogen/ammonia/nitrogen/oxygen/air flames. Combustion and Flame (2022)
Grappadelli C. M., Sudhi A., Radespiel R., Badrya C.; Experimental study of a wing with hybrid laminar flow control application. AIAA AVIATION 2022 Forum (2022)
Greco F. G., Guruprasad M. S., Ring P. T., Langer C. S.; The impact of the COVID-19 outbreak on the air traffic noise at the Hannover airport region. The Journal of the Acoustical Society of America (2022)
Greco F. G., Wienke F., Bertsch L., Ring T., Langer S.; Assessing the environmental noise of next-generation regional jet aircraft concepts in a generic airport scenario The Acoustical Society of Korea (2022)
Greco F. G., Wienke F., Bertsch L., Zellmann C., Schäffer B., Ring P. T., Langer C. S.; A comparative study of semi-empirical noise emission models based on the PANAM and sonAIR aircraft noise simulation tools Institute of Noise Control Engineering (2022)
Greco F. G., Yildiz B., Göing J., Ring P. T., Feuerle T., Hecker P., Langer C. S.; Environmental Noise Assessment of Holding Approach Procedures Using a Multi-Level Simulation Framework. Aerospace (2022)
Gronau S., Hoelzen J., Mueller T., Hanke-Rauschenbach R.; Hydrogen-powered aviation in Germany: A macroeconomic perspective and methodological approach of fuel supply chain integration into an economy-wide dataset. International Journal of Hydrogen Energy (2022)
Guruprasad M. S., Greco F. G., Ring T., Langer S.; A quantitative approach to density--based clustering of flight trajectories for efficient air traffic noise simulations. Institute of Noise Control Engineering (2022)
Hagedorn M., Lorenz M., Mertens A.; Cascaded H-Bridge Converter Designs for Future Short-Range All-Electric Aircraft Propulsion IEEE (2022)
Hahn D., Haupt M.; Exploration of the effect of wing component post-buckling on bending-twist coupling for nonlinear wing twist. CEAS Aeronaut J (2022)
Hahn D., Haupt M., Heimbs S.; Load alleviation capabilities of wings with nonlinear structural behavior in stationary and dynamic load cases International Forum on Aeroelasticity and Structural Dynamics - IFASD 2022 (2022)
Hahn D., Haupt M., Heimbs S.; Passive Load Alleviation by Nonlinear Stiffness of Airfoil Structures. American Institute of Aeronautics and Astronautics (2022)
He X., Wang Q., Fernandes R., Shu B.; Investigation on the autoignition characteristics of propanol and butanol isomers under diluted lean conditions for stratified low temperature combustion. Combustion and Flame (2022)
Hoelzen J., Flohr M., Silberhorn D., Mangold J., Bensmann A., Hanke-Rauschenbach R.; H2-powered aviation at airports – Design and economics of LH2 refueling systems. Energy Conversion and Management: X (2022)
Hoelzen J., Silberhorn D., Zill T., Bensmann B., Hanke-Rauschenbach R.; Hydrogen-powered aviation and its reliance on green hydrogen infrastructure – Review and research gaps. International Journal of Hydrogen Energy (2022)
Hon S. K., Karpuk S., Yang D., Elham A.; Development of a Flight Simulator for Conceptual Aircraft Design and Sizing. Transactions on Aerospace Research (2022)
Inkermann D.; Lifecycle Option Selection in Early Design Stages Based on Degradation Model Evaluation. Proceedings of the Design Society (2022)
Jean-Fulcrand A., Jeon J. E., Karimpour S., Garnweitner G.; Polymeric nanocomposites for lithium–sulfur batteries. Elsevier (2022)
Jeon J. E., Jean-Fulcrand A., Kwade A., Garnweitner G.; A room-temperature high performance all-solid-state lithium-sulfur battery enabled by a cross-linked copolymer@ceramic hybrid solid electrolyte. Nano Energy (2022)
Karpuk S., Elham A.; Comparative study of hydrogen and kerosene commercial aircraft with advanced airframe and propulsion technologies for more sustainable aviation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering (2022)
Karpuk S., Radespiel R., Elham A.; Assessment of Future Airframe and Propulsion Technologies on Sustainability of Next-Generation Mid-Range Aircraft. Aerospace (2022)
Keuter J. R., Ponick B.; First Step to Optimum Rotor Design for E-Motors with High Power Density for Aircraft Propulsion. (2022)
Kim R. H., Mimic D., Seume R. J.; Influence of Axial Gaps on Forced Response of Different Mode Shapes in a Low-Pressure Compressor. (2022)
Kopp T., Bösche D., Vieth P., Anspach F., Kurrat M., Meyer S.; Prüfungen von Hybridschaltern in dem neuartigen Hochleistungs-Gleichstromprüffeld DC.lab der TU Braunschweig, Kontaktverhalten und Schalten VDE VERLAG GMBH (2022)
Kösters L. T., Liu X., Kožulović D., Wang S., Friedrichs J., Gao X.; Comparison of phase-change-heat-pump cooling and liquid cooling for PEM fuel cells for MW-level aviation propulsion. International Journal of Hydrogen Energy (2022)
Lenk T., Rabet S., Sprick M., Raabe G., Schröder U.; Insight into the Interaction of Furfural with Metallic Surfaces in the Electrochemical Hydrogenation Process. ChemPhysChem (2022)
Li M., He X., Hashemi H., Glarborg P., Lowe M. V., Marshall P., Fernandes R., Shu B.; An experimental and modeling study on auto-ignition kinetics of ammonia/methanol mixtures at intermediate temperature and high pressure. Combustion and Flame (2022)
Mallwitz R. S. H. K. R.; Study of Current Ripple Generators for Accelerated Ageing of Capacitors IEEE (2022)
Melo P. S., Cerdas F., Barke A., Thies C., Spengler S. T., Herrmann C.; Life Cycle Engineering Modelling Framework for batteries powering electric aircrafts – the contribution of eVTOLs towards a more sustainable urban mobility. (2022)
Meyer P., Traub H., Hühne C.; Actuated adaptive wingtips on transport aircraft: Requirements and preliminary design using pressure-actuated cellular structures. Aerospace Science and Technology (2022)
Mimic D., Sauer P., Seume R. J.; Sensitivity Of Compressor Performance And Tipleakage Vortices To Inhomogeneous Casing Heatflux Distributions. (2022)
Monkam K. L., Schweinitz v. G. A., Friedrichs J., Gao X.; Feasibility analysis of a new thermal insulation concept of cryogenic fuel tanks for hydrogen fuel cell powered commercial aircraft. International Journal of Hydrogen Energy (2022)
Montano Z., Seidler M., Riemenschneider J., Friedrichs J.; A Coupling Method for the Design of Shape-Adaptive Compressor Blades. Applied Mechanics (2022)
Mosca V., Elham A.; Investigations on the Potentials of Novel Technologies for Aircraft Fuel Burn Reduction through Aerostructural Optimisation. Aerospace (2022)
Munirathinam B., Lerch L., Hüne D., Lentz L., Lenk T., Görke M., Garnweitner G., Schlüter N., Kubannek F., Schröder D., Gimpel T.; Enhanced Performance of Laser‐Structured Copper Electrodes Towards Electrocatalytic Hydrogenation of Furfural. ChemElectroChem (2022)
Petersen J., Kube A., Geier S., Wierach P.; Structure-Integrated Thin-Film Supercapacitor as a Sensor. Sensors (2022)
Prasannakumar A., Sudhi A., Seitz A., Badrya C.; Suction System Design for Transonic HLFC Wing. AIAA (2022)
Prasannakumar A., Wolff J., Radespiel R., Boermans L., Hühne C., Badrya C.; Design and power calculation of HLFC suction system for a subsonic short-range aircraft. CEAS Aeronaut J (2022)
Pöch N., Nozinski I., Broihan J., Helber S.; Numerical Study on Planning Inductive Charging Infrastructures for Electric Service Vehicles on Airport Aprons. Energies (2022)
Rabet S., Raabe G.; Comparison of the GAFF, OPLSAA and CHARMM27 force field for the reproduction of the thermodynamics properties of furfural, 2-methylfuran, 2,5-dimethylfuran and 5-hydroxymethylfurfural. Fluid Phase Equilibria (2022)
Rejas M. Z., Seidler M., Riemenschneider J., Friedrichs J.; Aerodynamic validation for compressor blades’ structural morphing concepts. CEAS Aeronaut J (2022)
Rolinck, M., Rüsch, S., Mennenga, M., Jehl, L., Herrmann, C.; Deployment Settings for the Integration of Blockchain Networks in Learning Factories.. SSRN (2022)
Römer U., Bertsch L., Mulani B. S., Schäffer B.; Uncertainty Quantification for Aircraft Noise Emission Simulation: Methods and Limitations. AIAA Journal (2022)
Schefer H., Canders W., Hoffmann J., Mallwitz R., Henke M.; Cryogenically-Cooled Power Electronics for Long-Distance Aircraft. IEEE Access (2022)
Schefer H., Hanisch L., Dietrich T., Mallwitz R., Henke M.; Design of a High-Dynamic Test Bench for Accelerated Dielectric Lifetime Testing with Adjustable Voltage Slopes and Temperatures IEEE (2022)
Schefer H., Xu Z., Kopp T., Mallwitz R., Kurrat M.; Investigation of Creepage Distances on Printed Circuit Boards for Avionic Applications IEEE (2022)
Seidler M., Friedrichs J.; Introduction Of An Improved Axial Compressor Profile Shape Modelling Approach For Increased Flexibility In Transonic Profile Design. GPPS (2022)
Seidler M., Rejas M. Z., Friedrichs J., Riemenschneider J.; Introduction and Evaluation of an Aerostructural Coupling Approach for the Design of Shape Adaptive Compressor Blading Curran Associates, Inc. (2022)
Simanowitsch D., Sudhi A., Theiss A., Badrya C., Hein S.; Comparison of Gradient-Based and Genetic Algorithms for Laminar Airfoil Shape Optimization. AIAA (2022)
Soldenhoff v. R., Lüdeke H.; Investigation of Interactions Between Suction Chamber and Boundary Layer over Suction Walls Using Direct Numerical Simulations ECCOMAS 2022 (2022)
Thel S., Hahn D., Haupt M., Heimbs S.; A passive load alleviation aircraft wing: topology optimization for maximizing nonlinear bending–torsion coupling. Struct Multidisc Optim (2022)
Toghyani S., Baakes F., Zhang N., Kühnelt H., Cistjakov W., Krewer U.; Model-Based Design of High Energy All-Solid-State Li Batteries with Hybrid Electrolytes. Journal of Electrochemical Society (2022)
Vogt D., Michalowski P., Kwade A.; Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries (2022)
Wilde A., Wanielik F., Rolinck M., Mennenga M., Abraham T., Cerdas F., Herrmann C.; Ontology-based approach to support life cycle engineering: Development of a data and knowledge structure. Procedia CIRP (2022)
Willamowski L. J. F., Tillmann M. A.; Minimizing Airplane Boarding Time. Transportation Science (2022)