Publications

Recent Publications

Publications 2024

J. Hoffmann, W.-R. Canders, M. Henke, "Design Study for a Superconducting High-Power Fan Drive for a Long-Range Aircraft", Energies 2024, 17, 5652, doi.org/10.3390/en17225652.

A. Asgari and M. Henke, "Topology Analysis of Electric Machines for a Specific Mission Profile in Aviation Applications", 2024 International Conference on Electrical Machines (ICEM), Torino, Italy, 2024, pp. 1-7, doi.org/10.1109/ICEM60801.2024.10700526.

S. Balasubramanian, H. Schefer, M. Henke and R. Mallwitz, "Evaluation of PCB End-Windings for Low-Voltage Stators of High-Speed Electrical Machines," 2024 International Conference on Electrical Machines (ICEM), Torino, Italy, 2024, pp. 1-9, https://doi.org/10.1109/ICEM60801.2024.10700298.

L. Radomsky, R. Keilmann, D. Ferch, R. Mallwitz, "Challenges and Opportunities in Power Electronics Design for All- And Hybrid Electric Aircraft: A Qualitative Review and Outlook", CEAS Aeronautical Journal, 2024. https://doi.org/10.1007/s13272-024-00770-6.

R. Keilmann, F. Lippold and R. Mallwitz, "Power Cycling Results for Reliability Studies of SiC-Inverters," PCIM Europe 2024; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nürnberg, Germany, 2024, pp. 2967-2975. doi.org/10.30420/566262422.

L. Radomsky, M. Klintz, R. Mallwitz, "Conceptualization and Experimental Assessment of Design Aspects for 3-Level ANPC Inverters," International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM) Europe 2024, 11-13 June 2024, Nuremberg, Germany, 2024, doi.org/10.30420/566262463.

Publications 2023

N. Langmaack, "Decentralized Control of DC–DC Converters for Redundant Onboard Power Supply Based on Artificial Swarm Intelligence Approaches," in IEEE Access, vol. 11, pp. 138614-138622, 2023, doi:10.1109/ACCESS.2023.3339221

L. Radomsky, R. Keilmann, D. Ferch, R. Mallwitz, "Challenges and Opportunities in Power Electronics Design for All- And Hybrid Electric Aircraft: A Qualitative Review and Outlook", Deutscher Luft- und Raumfahrtkongress 2023, Sept 2023, Stuttgart, Germany.

D. Fischer, R. Rohn, R. Mallwitz, "Design Approach of an Integrated SiC-Inverter for an Electric Aircraft", ESARS-ITEC 2023; International Conference on Electrical Systems for Aircraft, Railwaym Ship Propulsion and Road Vehicles & International Transportation Electrification Conference.

L. Radomsky and R. Mallwitz, "Review, Comprehensive Analysis and Derivation of Analytical Power Loss Calculation Equations for Two- to Three-Level Midpoint Clamped Inverter Topologies with Hybrid Switch Configurations," Energies, vol. 16, no. 18, p. 6710, Sep. 2023, doi: 10.3390/en16186710.

N. Yogal, C. Lehrmann, M. Henke, "Reviewing Standards and Guidelines for High-Energy Efficient Line-Start Permanent Magnet Synchronous Machines with Explosion-Proof Capability in Explosive Atmospheres: A Comprehensive Analysis", SDEMPED23. 14th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drive.

J. Franzki, M. Henke, "Fast Electromagnetic and Thermal Design Space Analysis for PMSM Propeller Drives", IEEE PEDS 2023, Montreal, Canada.

F. Lippold and R. Mallwitz, "Lifetime model adjustments for GaN cascodes as a base for inverter lifetime estimation", Power Electronic Devices and Components, vol. 5. Elsevier BV, p. 100039, Jun. 2023. doi: 10.1016/j.pedc.2023.100039.

M. Bagheribavaryani, J. Anspach, R. Mallwitz, M. Henke, N. Langmaack, "Solutions for integrating fuel cell systems into electric on-board grid for sustainable mobility applications", 2023 IEEE PEDS, Montreal, QC, Canada, 2023, pp. 1-6, doi: 10.1109/PEDS57185.2023.10268834.

Publications 2022

N. Wahler, L. Radomsky, L. V. Hanisch, R. Mallwitz, M. Henke, A. Elham, "A Credibility-Based Criterion for the Assessment of Futuristic Aircraft Concepts", 33rd Congress of the International Council of the Aeronautical Sciences, Sept 2022, Stockholm, Sweden.

N. Wahler, L. Radomsky, L. V. Hanisch, J. Göing, P. Meyer, R. Mallwitz, J. Friedrichs, M. Henke, A. Elham, "An Integrated Framework for Energy Network Modeling in Hybrid-Electric Aircraft Conceptual Design", AIAA Aviation 2022 Forum, Jun 2022, Chicago, USA & Virtual, doi: 10.2514/6.2022-3741.

D. Fischer, R. Mallwitz, "Characterizing SiC-Based Drive Inverter Losses Using the Method of Reduced Continuous Operation", PEDG 2022; Power Electronics for Distributed Generation Systems.

D. Fischer, R. Rohn, R. Mallwitz, "Comparative Implementation of a Two-Stage DC-Link", PCIM 2022; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management.

H. Schefer, W. -R. Canders, J. Hoffmann, R. Mallwitz and M. Henke, "Cryogenically-Cooled Power Electronics for Long-Distance Aircraft," in IEEE Access, vol. 10, pp. 133279-133308, 2022, doi: 10.1109/ACCESS.2022.3228161.

H. Marks, H. Schillingmann, S. Balasubramanian and M. Henke, "Linear Flux-Switching Machine Design - A Multiobjective Optimization," 2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), 2022, pp. 1-8.

H. Schefer, L. Hanisch, T. -H. Dietrich, R. Mallwitz and M. Henke, "Design of a High-Dynamic Test Bench for Accelerated Dielectric Lifetime Testing with Adjustable Voltage Slopes and Temperatures," 2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), 2022, pp. 1-10.

L. V. Hanisch, J. Franzki and M. Henke, "Impact of Insulation and Cooling on Performance due to Reliability-Oriented Design of Electrical Machines," 2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), 2022, pp. 1-7.

L. Hanisch, S. Balasubramanian, M. Sander, M. Henke, et al., "Influence of Driving Behavior on Thermal and Lifetime Characteristics of Electric Machines for Automotive Applications, " SAE Int. J. Elect. Veh. 12(2):2023, doi: 10.4271/14-12-02-0013.

L. V. Hanisch, L. Eisele, K. Lünne and M. Henke, "Modeling of Transient Overvoltages in Inverter-fed Machines with Hairpin Winding," 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2022, pp. 605-609, doi: 10.1109/SPEEDAM53979.2022.9842267.

P. -O. Gronwald, N. Wiese, T. A. Kern and M. Henke, "Electric traction motor spray cooling – Empirical model development and experimental validation," in IEEE Transactions on Transportation Electrification, 2022, doi: 10.1109/TTE.2022.3206031.

R. Keilmann, H. Schefer, R. Mallwitz, "Study of Current Ripple Generators for Accelerated Ageing of Capacitors," 2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), 2022, pp. 1-10.

N. Langmaack, "Optimierung leistungselektronischer Wandler in Fahrzeugantriebssträngen basierend auf Siliziumkarbidleistungshalbleitern", 2022, Cuvillier Verlag, cuvillier.de/de/shop/publications/8617-optimierung-leistungselektronischer-wandler-in-fahrzeugantriebsstrangen-basierend-auf-siliziumkarbidleistungshalbleitern

Publications 2021

D. Fischer, R. Rohn, R. Mallwitz, "Beneficial Control of Redundant Electric Drives in Aviation", Deutscher Luft- und Raumfahrtkongress (DLRK) 2021.

G. -L. Di Modica et al., "LISA4CL – Development and Grid Integration of an Inductive Charging System for City Logistics," NEIS 2021; Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg, Germany, 2021, pp. 1-6.

S. Scherler, S. Jacobitz, X. Liu-Henke and M. Henke, "Cloud-based V2X communication for dynamic intelligent guidance in connected traffic systems," 2021 IEEE International Symposium on Systems Engineering (ISSE), Vienna, Austria, 2021, pp. 1-7, doi: 10.1109/ISSE51541.2021.9582494.

N. Yogal, C. Lehrmann and M. Henke, "Permanent Magnet Eddy Current Loss Measurement at Higher Frequency and Temperature Effects under Ideal Sinusoidal and Non-Sinusoidal External Magnetic Fields," 2021 IEEE Energy Conversion Congress and Exposition (ECCE), 2021, pp. 4176-4181, doi: 10.1109/ECCE47101.2021.9596048.

H. Schillingmann, S. Gehler, M. Henke “Life cycle assessment of electrical machine production considering resource requirements and sustainability”, 11th Int. Electric Drives Production Conference EDPC 2021, Nürnberg, Germany.

S. Balasubramanian, N. Langmaack, M. Henke, "Evaluation and loss estimation of a high-speed permanent magnet synchronous machine with hairpin windings for high-volume fuel cell applications." Elektrotech. Inftech. 138, 415–423 (2021). doi: 10.1007/s00502-021-00914-0.

S. Balasubramanian, M. Henke, "Evaluation and Loss Estimation of Hairpin Windings for a High-Speed PMSM in High-Volume Fuel Cell Systems", mOre driVE 2021, Wien, Austria.

L. V. Hanisch, T. -H. Dietrich and M. Henke, "Analysis of Partial Discharges and Failure Mechanism in Electrical Machines with Hairpin Winding," 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2021, pp. 1-7, doi: 10.1109/SDEMPED51010.2021.9605500.

S. Balasubramanian, M. Henke, "Determination and Optimization of Multiphase Fractional Slot Windings used in Permanent Magnet Synchronous Machines", 24th International Conference on Electrical Machines and Systems, ICEMS 2021.

N. Yogal, C. Lehrmann, Z. Song, M. Henke, "Measurement of Eddy Current Loss in Permanent Magnets of Inverter-Fed Permanent Magnet Synchronous Machine During Normal Operation", 24th International Conference on Electrical Machines and Systems, ICEMS 2021.

N. Langmaack, S. Balasubramanian, R. Mallwitz and M. Henke, "Comparative Analysis of High Speed Drive Inverter Designs using different Wide-Band-Gap Power Devices," 2021 23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe), 2021, pp. 1-10, doi: 10.23919/EPE21ECCEEurope50061.2021.9570649.

N. Langmaack, R. Mallwitz, M. Henke, "Thermally optimized High Speed Drive Inverter Design using Surface Mount Silicon Carbide Devices", SIA Powertrain & Power Electronics 2021, Paris.

L . V. Hanisch, M. Henke, "Lifetime Modelling of Electrical Machines using the Methodology of Design of Experiments." Simul. Notes Eur. 31 (2021): 95-100. DOI: 10.11128/sne.31.tn.10568.

N. Langmaack, R. Mallwitz, M. Henke, "Thermally optimised High Speed Drive Inverter Design using Surface Mount Silicon Carbide Devices", SIA Power Train & Electronics (PWTE 2021), 2021, Paris, France.

N. Langmaack, S. Balasubramanian, R. Mallwitz, M. Henke, "Comparative Analysis of High Speed Drive Inverter Designs using different Wide-Band-Gap Power Devices", IEEE 23rd European Conf. on Power Electronics and Applications (EPE'21 ECCE Europe), doi: 10.23919/EPE21ECCEEurope50061.2021.9570649.

S. Balasubramanian, N. Langmaack, M. Henke, "Evaluation and loss estimation of a high-speed permanent magnet synchronous machine with hairpin windings for high-volume fuel cell applications", Elektrotechnik & Informationstechnik (2021) 138/6, pp. 415–423, doi: 10.1007/s00502-021-00914-0.

N. Langmaack, F. Lippold, D. Hu, R. Mallwitz, "Analysing Efficiency and Reliability of High Speed Drive Inverters Using Wide Band Gap Power Devices", Machines 2021, 9, 350, doi: 10.3390/machines9120350.

Publications 2020

D. Fischer, R. Mallwitz, "Analysis of Short Circuit Impact on Solid State Transformers", PCIM Europe digital days 2020; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management.

J. Hoffmann, W.-R. Canders, and M. Henke, "Impact of Current Density and Cooling on the Weight Balance of Electrical Propulsion Drives for Aviation", Energies, vol. 13, no. 22, p. 6149, Nov. 2020, doi: 10.3390/en13226149.

S. Scherler, X. Liu-Henke and M. Henke, "Predictive Energy Management for an Electric Vehicle with Fuel Cell Range Extender in Connected Traffic Systems," 2020 19th International Conference on Mechatronics - Mechatronika (ME), Prague, Czech Republic, 2020, pp. 1-8, doi: 10.1109/ME49197.2020.9286631.

M. Henke, J. Hoffmann, L. Waschke, "Modulare Entwicklungsplattform für elektrische Luftfahrtantriebe", 25. Symp. Simulationstechnik ASIM 2020.

L. V. Hanisch, M. Henke, "Lifetime modelling of electrical machines using the methodology of design of experiments", 25. Symp. Simulationstechnik ASIM 2020.

L. V. Hanisch, M. Sun, M. Henke, "Novel Modeling Approach for Voltage Distribution within Automotive Electrical Machines", Int. Conf. of Electrical Machines, ICEM 2020.

S. Balasubramanian, M. Henke, "Performance Evaluation of a High-Speed Permanent Magnet Synchronous Machine with Hairpin Winding Technology", Int. Conf. of Electrical Machines, ICEM 2020.

N. Langmaack, T. Schobre, Q. Maurus and M. Henke, "Battery System Design applied on IMAB-Racer Research EV," 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte-Carlo, Monaco, 2020, pp. 1-5, doi: 10.1109/EVER48776.2020.9242962.

N. Langmaack, G. Tareilus, M. Henke, "Power Electronic Components based on Silicon Carbide Devices for Future Vehicle Power Systems", Int. Conf. SIA Powertrain & Energy, 2020, Rouen, France.

N. Yogal, C. Lehrmann, M. Henke, "Experimental measurement of eddy current loss in permanent magnets of electrical machines with a PWM signal generated by a frequency converter", IEEE International Conference on Industrial Technology (ICIT) 2020.

T. Schobre, N. Langmaack and R. Mallwitz, "Analytical Modeling of Ripple Currents in a Drive Inverter with a LC Sine Wave Filter," PCIM Europe digital days 2020; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Germany, 2020, pp. 1-5, ieeexplore.ieee.org/document/9178028.

N. Langmaack, G. Tareilus, R. Mallwitz, "High Performance Drive Inverter for an Electric Turbo Compressor in Fuel Cell Applications", IEEE 22nd European Conf. on Power Electronics and Applications (EPE'20 ECCE Europe), doi: 10.23919/EPE20ECCEEurope43536.2020.9215777.

N. Langmaack, G. Tareilus, M. Henke, "Power Electronic Components based on Silicon Carbide Devices for Future Vehicle Power Systems", SIA Power Train & Energy (PWTE 2020), 2020, Rouen, France.

N. Langmaack, T. Schobre, Q. Maurus, M. Henke, "Battery System Design applied on IMAB-Racer Research EV", 15th Int. Conf. on Ecological Vehicles and Renewable Energies (EVER 2020), 2020, Monte-Carlo, Monaco, doi: 10.1109/EVER48776.2020.9242962.

Publication server

Institute series of the IMAB on the publication server of the TU Braunschweig:
LeoPARD - TU Braunschweig Publications And Research Data

Annual report

Annual reports (german)

Jahresbericht 2019/ 2020/ 2021

Jahresbericht 2022/ 2023

Older publications

Publications 2019

M. Henke, ‘Design of electrical high speed drives for vehicle drivetrains’, in 2019 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2019 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2019.

N. Yogal, C. Lehrmann, and M. Henke, ‘Measurement of eddy current loss in permanent magnets with high-frequency effects of electrical machines for hazardous locations’, in 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), 2019.

N. Langmaack, G. Tareilus, and M. Henke, ‘Modular Power Electronics for Electric Vehicles and Aviation Applications’, in 2019 IEEE 13th International Conference on Power Electronics and Drive Systems (PEDS), 2019.

S. Balasubramanian, C. Heister, and M. Henke, ‘Design Guidelines for Synchronous Machine Topologies with High Torque and Wide Field Weakening Demands’, in 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019.

C. Heister and M. Henke, ‘Improvements on Hybrid Analytical Modeling by Using Fourier Subdomains in Slot Regions’, in 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019.

Publications 2018

N. Yogal, C. Lehrmann, and M. Henke, ‘Determination of the Measurement Uncertainty of Direct and Indirect Efficiency Measurement Methods in Permanent Magnet Synchronous Machines’, in 2018 XIII International Conference on Electrical Machines (ICEM), 2018.

C. Heister and M. Henke, ‘Optimierungsmethodik flussmodulierter Maschinen am Beispiel der Flux Reversal Maschine’, e & i Elektrotechnik und Informationstechnik, vol. 135, no. 2, pp. 161–169, Mar. 2018.

K. Siebke, P. König, R. Mallwitz, "Methodical comparison of voltage measurement points for wide bandgap applications," EPE 2018, Riga.

D. Lumbreras, T. Schobre, R. Mallwitz, "Systematic and Easy-To-Use Design Procedure for Proportional-Integral-Resonant Controllers," EPE 2018, Riga.

Publications 2017

N. Langmaack, G. Tareilus, and M. Henke, ‘Intelligent driver circuit with robust serial interface’, in 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017.

C. Heister and M. Henke, ‘A fast analytical calculation methodology for topology studies of flux reversal machines’, in 2017 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF) Book of Abstracts, 2017.

Q. Maurus, W.-R. Canders, and M. Henke, ‘Increasing the force per unit volume of tubular drives by raising the integration degree’, in 2017 11th International Symposium on Linear Drives for Industry Applications (LDIA), 2017.

H. Schillingmann, C. Heister, and M. Henke, ‘Scaling process of synchronous reluctance machines for automotive applications’, in 2017 IEEE Transportation Electrification Conference and Expo (ITEC), 2017.

N. Yogal, C. Lehrmann, M. Henke, and X. Liu, ‘How to measure the demagnetization of permanent magnet synchronous machines used in explosive environments’, in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 2017.

M. Cai, Q. Maurus, and M. Henke, ‘Tubular PM machine with large force density and small force ripple for resonance operation’, in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 2017.

J.-H. Fey, F. Hinrichsen, R. Mallwitz, "Study on the total harmonic distortion of a 5 MW wind turbine with modular multilevel converter and development of a demonstrator," NEIS Conference 2017, September, 21-22, 2017, Hamburg.

K. Siebke, T. Schobre, N. Langmaack, R. Mallwitz, "High Power Density GaN Interleaved Bidirectional Boost Converter with Extended Cooling Capability,", PCIM 2017, Nürnberg.

E. Kiel, K. Rigbers, H. Wolf, R. Mallwitz, "Leistungselektronik in der Photovoltaik - aktueller Status und zukünftige Trends," ETG Tagung Bauelemente und ihre Anwendungen, 2017, Bad Nauheim.

Publications 2016

Tim-Hendrik Dietrich, Christoph Löffler, Markus Henke, Jürgen Meins, Jonas Wussow, Bernd Engel, Tamás Kurczveil, Johannes Callegari:
Conceptual design and integration of a high power inductive charging system into a series vehicle
13th Braunschweiger Symposium - Hybrid and Electric Vehicles,
23.02. - 24.02.2016, Braunschweig, Germany

Niklas Langmaack, Günter Tareilus, Markus Henke:
Novel Highly Integrated Current Measurement Method for Drive Inverters
2016 IEEE Applied Power Electronics Conference and Exposition (APEC),
20.03. - 24.03.2016, Long Beach (CA), USA

Christian Heister, Markus Henke:
Topology Comparison of Ferrite Magnet Synchronous Machines with Consideration of Low Inertia
11th International Conference on Ecological Vehicles and Renewable Energies - EVER 2016,
06.04. - 08.04.2016, Monaco

Anna-Lena Menn, Florian Mittelstädt, Markus Henke:
Energy Consumption of an Electrified Light Duty Vehicle by considering the Link Voltage's Variation
29th International Electric Vehicle Symposium - EVS29 2016,
19.06. - 22.06.2016, Montréal, Canada

Nijan Yogal, Christian Lehrmann, Markus Henke, Christian Heister, Hao Zheng:
Measurement and Simulation of Non-Oriented Electrical Steel Sheets Used in PMSM for Higher Frequency
29th International Electric Vehicle Symposium - EVS29 2016,
19.06. - 22.06.2016, Montréal, Canada

Konstantin Siebke, Thorben Schobre, Niklas Langmaack, Regine Mallwitz:
GaN based DC-DC Power Conversion - Experiences from Earth to Space,
ESA/ECSAT, 8th Wide Bandgap Semiconductor and Components Workshop,
12.09. - 13.09.2016, Harwell, UK

Publications 2015

Regine Mallwitz:
Kompakte Leistungselektronik für Elektrofahrzeuge
Symposium Hybrid- und Elektrofahrzeuge 2015,
24.02. - 25.02.2015, Braunschweig

Niklas Langmaack, Günter Tareilus, Markus Henke:
High Temperature and High CMR Gate Driver Circuit for Wide-Band-Gap Power Semiconductors
IEEE 11th International Conference on Power Electronics and Drive Systems (PEDS) 2015,
09.06. - 12.06.2015, Sydney, Australia

Nijan Yogal, Christian Lehrmann, Markus Henke:
Investigations on Permanent Magnetic Materials to be used in Explosion-Protected Permanent Magnet Synchronous Machines
IEEE 11th International Conference on Power Electronics and Drive Systems (PEDS) 2015,
09.06. - 12.06.2015, Sydney, Australia

Quirin Maurus, Wolf-Rüdiger Canders:
Application of Soft Magnetic Composites (SMC) in Linear Drives - Developments, Experiences and Results
Linear Drives for Industry Application (LDIA),
27.07. - 29.07.2015, Aachen, Germany

Nijan Yogal, Christian Lehrmann, Markus Henke, B. Shen:
Loss Comparison of Non-Oriented Electrical Steel Materials to be used in PMSM under Explosion Protection Aspects
17th Conference on Power Electronics and Applications (EPE'15-ECCE Europe),
08.09. - 10.09.2015, Geneva, Switzerland

Konstantin Siebke:
Einsatz von Galliumnitrid-Leistungshalbleitern in einem besonders kompakten Ladegerät für Elektrofahrzeuge
Halbleiter-Kolloquium - Halbleiter-Leistungsbauelemente und ihre systematische Anwendung,
26.10.2015, Freiburg

Christian Heister, Markus Henke:
Typology Comparison of Synchronous Machines to Substitute Rare-Earth Magnets by Ferrites
ISEF 2015 - XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering
10.09. - 12.09.2015, Valencia, Spain

Cornelius Bode, Wolf-Rüdiger Canders, Markus Henke:
A new analytical approach to determine slotting based eddy current losses in permanent magnets of PMSM taking into account axial and circumferential segmentation
International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
2015

J. Kerner, L. Spiegel, N. A. Daqqa, Holger Hinrich, Markus Henke:
Einfluss der Rotorspaltdicke auf das Dauerleistungsvermögen von außen laufenden PSMs
FVA-Tagung E-Motive,
München 2015

Publications 2014

Markus Henke, Günter Tareilus, Niklas Langmaack:
SiC boost converter with high power density for a battery electric sports car
11th Symposium on Hybrid and Electric Vehicles,
Februar 2014, Braunschweig

Christoph Löffler, Wolf-Rüdiger Canders:
Modulares Transportsystem mit räumlich gekrümmten Trajektorien
Antriebs Journal 02/2014

Anna-Lena Menn, Wolf-Rüdiger Canders, Markus Henke:
Holistic Analytical Design of Induction Motors for Automotive Application
9th International Conference on Ecological Vehicles and Renewable Energies,
25.03. - 27.03.2014, Monaco

Jan-Hendrik Psola, Kritika Pandya, Markus Henke:
Characteristics of Energy Storage in Smart Grids
9th International Conference on Ecological Vehicles and Renewable Energies,
25.03. - 27.03.2014, Monaco

Jan Hoffmann, Wolf-Rüdiger Canders, Markus Henke:
Herausforderungen bei Design und Realisierung von elektrischen Hochdrehzahl-Traktionsantrieben
E-Motive 6. Expertenforum Elektrische Fahrzeugantriebe (Wolfsburg),
14.05. - 15.05.2014

Jan-Hendrik Psola, Wolf-Rüdiger Canders, Markus Henke:
Optimization of energy output by combining energy storages with renewable energies
PCIM ASIA 2014,
17.06. - 19.06.2014, Shanghai

Fabian Hain, Nils Domann, Markus Henke:
Interaction of Winding Topologies and Rotor Structure in Interior Permanent Magnet Machines
XXIth International Conference on Electrical Machines (ICEM) 2014,
02.09. - 05.09.2014, Berlin, Germany

Nils Domann, Markus Henke:
Design and Build-up of a High Performance Six-phase Machine for an Automotive Application
XXIth International Conference on Electrical Machines (ICEM) 2014,
02.09 - 05.09.2014, Berlin, Germany

Mang Cai, Markus Henke, Wolf-Rüdiger Canders:
Least Squares based d-q Model of Non-ideal Multiphase Synchronous Machine
XXIth International Conference on Electrical Machines (ICEM) 2014,
02.09. - 05.09.2014, Berlin, Germany

Cornelius Bode, H. Schillingmann, Markus Henke:
Linear Generator in Vernier Topology using quasi-Halbach-Excitation
XXIth International Conference on Electrical Machines (ICEM) 2014,
02.09. - 05.09.2014, Berlin, Germany

Nils Domann, Markus Henke:
Determining the Effects of Rotor Eccentricity and Slotting Through n Analytical Method
5th International Symposium on Applied Electromagnetics (SAEM), pp. 1-7.

Benjamin Munzel, Fridolin Muuß, Jan-Hendrik Psola, Nasser Hemdan
Effizientes und ökonomisches Energieversorgungskonzept von Bürogebäuden mit hoher Autarkiequote
VDE-Kongress 2014,
20.10. - 21.10.2014, Frankfurt am Main

Benjamin Munzel, Fridolin Muuß, Nasser Hemdan, Jan-Hendrik Psola
DC Energieversorgungskonzept für Großgebäude mit hoher Autarkiequote
VDE-Kongress 2014,
20.10. - 21.10.2014, Frankfurt am Main

Mang Cai, Markus Henke, Wolf-Rüdiger Canders:
An Improved Method for Design of Multiphase Winding with Optimal Space Harmonics Spectrum
17th International Conference on Electrical Machines and Systems (ICEMS)
22.10 - 25.10 2014, Hangzhou, China

Publications 2013

Nils Domann, Wolf-Rüdiger Canders, Markus Henke:
Design Process and Topology Comparison for a High Performance PM-Machine for Sustainable Traction Drive Technology
Ecological Vehicles & Renewable Energies International Conference 2013,
27.03. - 30.03.2013, Monaco

Jan-Hendrik Psola, Wolf-Rüdiger Canders, Markus Henke:
Modeling of a Redox Flow Battery Storage for Grid Applications
PCIM ASIA 2013,
18.06. - 20.06.2013, Shanghai

Mang Cai, Markus Henke, Wolf-Rüdiger Canders:
A Deterministic Method for Finding Multi Phase Winding Topologies with Quasi-Ideal Current Sheet Space Harmonics Spectrum
9th International Symposium on Linear Drives for Industry Applications 2013 - LDIA 2013,
07.07. - 10.07.2013, Hangzhou, China

Jan-Hendrik Psola, Wolf-Rüdiger Canders, Markus Henke:
Technologies and Operational Concepts for Energy Storages
Envioinfo 2013,
02.09. - 04.09.2013, Hamburg

Publications 2012

Wolf-Rüdiger Canders, Cornelius Bode, Jan Hoffmann, Hardo May:
Unusual Topologies of Electrical Machines for Hybrid and Electric Vehicles
9th Symposium on Hybrid and Electric Vehicles (HEV 2012),
14.02. - 15.02.2012, Braunschweig

Publications 2011

Hardo May, Ryszard Palka, P. Paplicki, S. Slkolny, Wolf-Rüdiger Canders:
Modified concept of permanent magnet excited synchronous machines with improved high-speed features
8th International Conference on Computation in Electronics,
11.04. - 14.04.2011, Wroclaw, Poland

Cornelius Bode, Wolf-Rüdiger Canders:
New Topology for High Force Linear Actuators with Tooth Windings
8th International Symposium on Linear Drives for Industry Applications 2011 - LDIA 2011,
03.07. - 06.07.2011, Eindhoven, Niederlande

Cornelius Bode, Hardo May, Wolf-Rüdiger Canders:
Optimized reduction of parasitic eddy current losses in high speed permanent magnet motors based on 2D and 3D field calculations
XV International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering,
01.09. - 03.09.2011, Funchal, Madeira

Jan-Hendrik Psola, Johannes Zentner:
Konzeptanalyse zur kontaktlosen Energie- und Datenübertragung für planare Antriebssysteme
Internationaler ETG-Kongress 2011,
08.11. - 09.11.2011, Würzburg, Deutschland

Publications 2010

Wolf-Rüdiger Canders, Günter Tareilus, Immo Koch, Hardo May:
New Design and Control Aspects for Electric Vehicle Drives
14th International Power Electronics and Motion Control Conference (EPE-PEMC) 2010,
06.09. - 08.09.2010, Ohrid, Macedonia

Quirin Maurus, Christoph Löffler, Wolf-Rüdiger Canders:
New Linear Drive Concepts by Taking Advantage of Soft Magnetic Composites (SMC)
14th International Power Electronics and Motion Control Conference (EPE-PEMC) 2010,
06.09. - 08.09.2010, Ohrid, Macedonia

Cornelius Bode, Wolf-Rüdiger Canders:
Advanced calculation of eddy current losses in PMSM with tooth windings
XIX International Conference on Electrical Machines (ICEM) 2010,
06.11. - 08.11.2010, Rom, Italien

Publications 2009

C. Mertens, I. Koch, N. Lescow, W.-R. Canders, K. Kriegel, M. Thoben, R. Brey, A. Schießl:
Anforderungen an integrierte Leistungselektronik im Hybridfahrzeug bei hohem Kühltemperaturniveau.
Ergebnisse aus dem InGA-Projekt.
6. Braunschweiger Symposium "Hybridfahrzeuge und Energiemanagement",
18.02. - 19.02.2009, Braunschweig, Germany

A. Guetif, J. Meins:
Belastungsmessungen an Superkondensatoren: Zyklen und Temperaturbeanspruchung
6. Braunschweiger Symposium "Hybridfahrzeuge und Energiemanagement",
18.02. - 19.02.2009, Braunschweig, Germany

W.-R. Canders:
Ausnutzung versus Wirkungsgrad bei Synchron- und Asynchronantrieben
Haus der Technik Fachtagung "Praxis der elektrischen Antriebe für Hybrid- und Elektrofahrzeuge",
24.03. - 25.03.2009, München, Germany

Hardo May, W.-R. Canders, N. Lescow:
Leistungssteigerungen bei ASM durch optimierte Wechselrichterspeisung
Haus der Technik Fachtagung "Praxis der elektrischen Antriebe für Hybrid- und Elektrofahrzeuge",
24.03. - 25.03.2009, München, Germany

Hardo May, J. Meins, W.-R. Canders:
PM-erregte Synchronmaschine mit statorseitiger Hybriderregerwicklung
Haus der Technik Fachtagung "Praxis der elektrischen Antriebe für Hybrid- und Elektrofahrzeuge",
24.03. - 25.03.2009, München, Germany

J. Zentner:
Synergetic Design Approach Referring to Integrated Drive Systems
IEEE International Conference on Mechatronics - ICM 2009,
14.04. - 17.04.2009, Malaga, Spain

J. Meins:
Grundlagen der induktiven Energieübertragung
Haus der Technik Fachtagung "Berührungslose Energieübertragung - Stand der Technik",
07.05.2009, Essen, Germany

G. Bühler:
Berührungslose Energieübertragung für Transportsysteme
Haus der Technik Fachtagung "Berührungslose Energieübertragung - Stand der Technik",
07.05.2009, Essen, Germany

T. Kochubey, K. Shaposhnikov, V. Astakhov, J. Zentner:
Mathematical Modelling of Spherical Induction Machines by Means of Integral Equations Method
International Scientific Colloquium - Mechatronics 2009,
08.06. - 12.06.2009, Novotscherkassk, Russia

T. Kochubey, K. Shaposhnikov, V. Astakhov, J. Zentner:
Investigation of Motor, Generator, and Braking Operating Modes of Spherical Multi Coordinate Induction Machines
54. International Scientific Colloquium, Information Technology and Electrical Engineering - Devices and Systems, Materials and Technology for the Future,
07.09. - 10.09.2009, Ilmenau, Germany

K. Obraztsov, G. Odnokopylov, J. Zentner:
Design of Electric Drives with Taking into Account of Reliability
Workshop on Fundamental and Applied Reliability Problems of Machines,
Russian Academy of Science, Institute of Problems of Mechanical Engineering,
26.10. - 30.10.2009, St. Petersburg, Russia

K. Obraztsov, G. Odnokopylov, J. Zentner:
Zuverlässigkeit und Notlaufeigenschaften in Bezug auf Elektrische Antriebe
DAAD-Workshop,
12.05. - 14.05.2009, Moskau, Russia

Hardo May, W.-R. Canders, C. Bode:
From the Basis of Forces to Optimal Machine Designs and Optimal Feeding
Lecture at the Faculty of Electrical Engineering, West Pomeranian University of Technology,
04.06. - 05.06.2009, Szczecin, Poland

W.-R. Canders, H. Wöhl-Bruhn:
Design Aspects of Hybrid Vehicles
Lecture at the Faculty of Electrical Engineering, West Pomeranian University of Technology,
04.06. - 05.06.2009, Szczecin, Poland

P. Di Barba, Hardo May, M. E. Mognaschi, R. Palka, A. Savini:
Shape design optimization of the excitation arrangement and superconducting bulks used in magnetic bearings
ISTET 2009, 15th International Symposium on Theoretical Electrical Engineering,
22.06. - 24.06.2009, Lübeck, Germany

Hardo May , J. Meins, W.-R. Canders, R. Palka:
New Permanent Magnet excited Synchronous Machine with extended, Stator fixed Auxiliary Excitation Coil
ISEF 2009, 14th International Symposium on Electromagnetical Fields,
10.09. - 12.09.2009, Arras, France

W.-R. Canders, A. Asaf Ali:
Torque Ripple Situation in High Torque Synchronous Machine with Protected Magnets
ISEF 2009, 14th International Symposium on Electromagnetical Fields,
10.09. - 12.09.2009, Arras, France

Q. Maurus, W.-R. Canders, J. Hoffmann, H. Mosebach:
Modular Linear Drive System with Soft Magnetic Composite Elements for 3D Tracks
LDIA 2009, 7th International Symposium on Linear Drives for Industry Applications,
20.09. - 23.09.2009, Incheon, Korea

A. Guetif, J. Meins:
Umrichtersysteme und neue Speicherkomponenten
3. Statusseminar des Forschungsverbunds Energie Niedersachsen (FEN),
24.09. - 25.09.2009, Oldenburg, Germany

I. Koch, W.-R. Canders:
Discussion of turn on current peaks of SiC switches in half bridges
ICSCRM 2009, 13th International Conference on Silicon Carbide and Related Materials,
11.10. - 16.10.2009, Nürnberg, Germany

J. Meins, A. Guetif, M. Kurrat, H. Haupt:
Netzstützung durch Superkondensatoren und Batteriespeicher
Internationaler ETG Kongress 2009 - Fachtagung 2 "Leistungselektronik in Netzen",
27.10. - 28.10.2009, Düsseldorf, Germany

Hardo May, J. Hoffmann, W.-R. Canders, R. Palka:
Activation and electro-dynamic dampers, key technologies for the operation of superconducting magnetic bearings
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
Vol. 28 (2009) No.1, pp. 188-203

P. Di Barba, Hardo May, M. E. Mognaschi, R. Palka, A. Savini:
Multiobjective design optimization of an excitation arrangement used in superconducting magnetic bearings
International Journal of Applied Electromagnetics and Mechanics, 30 (2009), pp. 127-134

Publications 2008

A. Guetif, J. Meins:
Ein Energiespeichersystem mit Superkondensator
2. Statusseminar des Forschungsverbunds Energie Niedersachsen (FEN)
29.05. - 30.05.2008, Braunschweig, Germany

N. Nikulin, J. Zentner:
Analysis of a Planar Drive Structure Based on the Principle of Induction Motor
Actuator 08 ? International Conference and Exhibition on New Actuators and Drive Systems
09.06. - 11.06.2008, Bremen, Germany

F. Hinrichsen, W.-R. Canders:
The Resonant Commutated Twin Pole Inverter
PESC 2008, 39th IEEE Power Electronic Specialists Conference
15.06 - 19.06.2008, Rhodos, Greece

N. Nikulin, J. Zentner:
Control of Planar Drives Based on Induction Motor
International Scientific Colloquium - Mechatronics 2008
18.06. - 20.06.2008, Novotscherkassk, Russia

W.-R. Canders, D. Hülsmann, H. Mosebach:
Power Loss Effects in Protection Sleeves of Permanent Magnet Excited Synchronous Machines with Surface Magnets
ICEM 2008, 18th International Conference on Electrical Machines
06.09. - 09.09.2008, Vilamoura, Portugal

F. Laube, H. Mosebach, W.-R. Canders:
Skin Effect in Large Polyphase Machines with Concentrated Windings
ICEM 2008, 18th International Conference on Electrical Machines
06.09. - 09.09.2008, Vilamoura, Portugal

I. Koch, W.-R. Canders:
Comparison of SiC-JFET and Si-IGBT inverter losses
ECSCRM 2008, 7th European Conference on Silicon Carbide and Related Materials
07.09. - 11.09.2008, Barcelona, Spain

J. Zentner:
Comparative Analysis of Domain-Spanning Simulation Concepts Referring to Integrated Drive Systems
53. International Scientific Colloquium - Prospects in Mechanical Engineering
08.09. - 12.09.2008, Ilmenau, Germany

P. Di Barba, Hardo May, M. E. Mognaschi, R. Palka, A. Savini:
Multiobjective design optimization of an excitation arrangement used in superconducting magnetic bearings
Xth International Workshop on Optimization and Inverse Problems in Electromagnetism
14.09. - 17.09.2008, Ilmenau, Germany

J. Meins, W.-R. Canders, A. Guetif:
Klassifizierung von Energiespeichern
1. Braunschweiger Symposium "Elektrische Leistungsbordnetze und Komponenten von Straßenfahrzeugen"
08.10. - 09.10.2008, Braunschweig, Germany

J. Meins, A. Guetif:
Belastungsmessungen an Superkondensatoren: Zyklen und Temperaturbeanspruchung
1. Braunschweiger Symposium "Elektrische Leistungsbordnetze und Komponenten von Straßenfahrzeugen"
08.10. - 09.10.2008, Braunschweig, Germany

W.-R. Canders:
Elektrische Energiespeicher
Beitrag des IMAB zum Studium Generale 2008 der TU Braunschweig
29.10.2008, Braunschweig, Germany

W.-R. Canders, W. Schumacher:
Antriebe für Fahrsimulatoren zum Erproben von Fahrzeugen im Grenzbereich
ZVB-Kolloquium / GZVB-Studentenwettbewerb 2008
26.11.2008, Braunschweig, Germany

J. Zentner, N. Gorbatenko:
Mehrkoordinatenantriebe - Herausforderung an die Messtechnik
Workshop "Methoden zur Messung magnetischer Eigenschaften von Elektromagneten und Reluktanzmotoren kleiner Leistungen"
01.12. - 02.12.2008, Ilmenau, Germany

Publications 2007

J. Meins, W.-R. Canders, A. Guetif:
Energiespeichersystem mit Superkondensatoren
1. Statusseminar "Forschungsverbund Energie Niedersachsen"
18.06. - 19.06.2007, Goslar, Germany

J. Meins, R. Czainski, F. Turki:
Contactless High Power Supply
ISTET 2007, XIV International Symposium on Theoretical Electrical Engineering
20.06. - 23.06.2007, Szczecin, Poland

H. Wöhl-Bruhn, W.-R. Canders:
Design aspects of synchronous machine drives for hybrid vehicles
ISTET 2007, XIV International Symposium on Theoretical Electrical Engineering
20.06. - 23.06.2007, Szczecin, Poland

Hardo May, K. Nishikawa, W.-R. Canders:
New Finite Element based Optimal Current Control of Induction Machines with Static and Dynamic Loads
ISTET 2007, XIV International Symposium on Theoretical Electrical Engineering
20.06. - 23.06.2007, Szczecin, Poland

Hardo May, J. Hoffmann, W.-R. Canders, R. Palka:
Activation and Electro Dynamic Dampers, the Key Technologies for the Operation of Superconducting Magnetic Bearings (SMB)
ISTET 2007, XIV International Symposium on Theoretical Electrical Engineering
20.06. - 23.06.2007, Szczecin, Poland

W.-R. Canders:
Berührungsfreie, supraleitende Lager für Hochdrehende Maschinen
2. Braunschweiger Supraleiter Seminar
25.06.2007, Braunschweig, Germany

W.-R. Canders, N. Lescow, F. Hinrichsen:
Three Phase Current Source Auxiliary Resonant Commutated Pole Inverter using IGBTs
EPE 2007, 12th European Conference on Power Electronics and Applications
02.09. - 05.09.2007, Aalborg, Denmark

W.-R. Canders, H. Wöhl-Bruhn, F. Küçükay, M. Fugel:
Anforderung an die Ausbildung von Hybridexperten
19. Internationale AVL-Tagung Motor und Umwelt
06.09. - 07.09.2007, Graz, österreich

W.-R. Canders, P. Hoffmann, H. Mosebach, G. Tareilus:
Large High Performance Linear Drive with High Overload Capability and Very Small Thrust Ripple
LDIA 2007, 6th International Symposium on Linear Drives for Industrial Applications
16.09. - 19.09.2007, Lille, France

W.-R. Canders:
High Power Flywheels With Super Conducting Bearings - Design Considerations and Experiences
EESAT 2007, Electrical Energy Storage Applications and Technologies
23.09. - 26.09.2007, San Francisco, USA

Presse: Interview vom 29. September 2007
Speichertechnik läuft rund: Schwungmassenspeicher der nächsten Generation
Deutschlandfunk, "FORSCHUNG AKTUELL"
29.09.2007, Köln, Germany

A. Guetif:
Energiespeicher: Superkondensatoren und Batterien im Vergleich
Projekttreffen des Forschungsverbunds Energie Niedersachsen (FEN)
17.10.2007, Hannover, Germany

H. Wöhl-Bruhn, W.-R. Canders:
Einsatz von Synchronmaschinen in leistungsverzweigten Antriebssystemen
ETG-Kongress 2007 "Hybridantriebstechnik - Energieeffiziente elektrische Antriebe"
23.10. - 24.10.2007, Karlsruhe, Germany

W.-R. Canders:
Schwungmassenspeicher mit supraleitender Lagerung
Kooperationsforum "Elektrische Energiespeicher"
06.12.2007, Nürnberg, Germany

Publications 2006

H. Wöhl-Bruhn, W.-R. Canders, R. Kube:
Trägheitsarme Elektromaschinen für Hybridfahrzeuganwendungen
3. Braunschweiger Symposium "Hybridfahrzeuge und Energiemanagement"
14.02. - 15.02.2006, Braunschweig, Germany

W.-R. Canders, M. R. Rezaei:
PM excited polyphase machine with low inertia
ICEM 2006, 17th International Conference on Electrical Machines
02.09. - 05.09.2006, Crete Island, Greece

W.-R. Canders, H. Mosebach, M. R. Rezaei:
Versatile High Torque Direct Drive with PM-Excitation and Duplex Stator Arrangement
ICEM 2006, 17th International Conference on Electrical Machines
02.09. - 05.09.2006, Crete Island, Greece

J. Meins, G. Bühler, R. Czainski, F. Turki:
Contactless Inductive Power Supply
MAGLEV 2006, 19th International Conference on Magnetically Levitated Systems and Linear Drives
13.09. - 15.09.2006, Dresden, Germany

W.-R. Canders:
Schwungmassenspeicher mit HTS-Lagerung - Entwicklungsstand
IRES I, 1. Internationale Konferenz "Energieautonomie durch Speicherung Erneuerbarer Energien"
30.10. - 31.10.2006, Gelsenkirchen, Germany

H. Wöhl-Bruhn, W.-R. Canders, F. Küçükay, N. Scholz, W. Schumacher, M. Herchenhan:
Elektrisch leistungsverzeigte Stufenlosgetriebe für Hybridfahrzeuge
5. VDI - Tagung mit Fachausstellung "Innovative Fahrzeugantriebe"
09.11. - 10.11.2006, Dresden, Germany

W.-R. Canders:
Compressed Air Energy Storage (CAES)
Seminar "Forschungsverbund Energie Niedersachsen"
16.11. - 17.11.2006, Braunschweig, Germany

W.-R. Canders:
Hochleistungsantriebe
Vortragsreihe des "Antriebsforum Harz"
29.11.2006, Hochschule Harz, Wernigerode, Germany

Publications 2005

W.-R. Canders, H. Wöhl-Bruhn:
Konkurrierende Antriebssysteme für Hybridfahrzeuge
Vortragsreihe des Antriebsforum Harz
25.05.2005, Hochschule Harz, Wernigerode, Germany

J. Meins, F. Turki, R. Czainski:
Phase control of resonant power supply inverters
EPE 2005, 11th European Conference on Power Electronics and Applications
11.09. - 14.09.2005, Dresden, Germany

I. Koch, F. Hinrichsen, W.-R. Canders:
Application of SiC-JFETs in Current Source Inverter Topologies
EPE 2005, 11th European Conference on Power Electronics and Applications
11.09. - 14.09.2005, Dresden, Germany

H. Walter, J. Bock, Ch. Frohne, K. Schippl, Hardo May, W.-R. Canders, P. Kummeth, W. Nick, H.-W. Neumueller:
Superconducting Bearing with Novel Activation Technology for Shaft Loads up to 10 kN
EUCAS 2005, 7th European Conference on Applied Superconductivity
11.09. - 15.09.2005, Vienna, Austria

Hardo May, J. Hoffmann, R. Palka, W.-R. Canders, H. Walter, J. Bock:
Advanced Force Activation Set-Ups for Superconducting Magnetic Bearings
ISMST 2005, 8th International Symposium on Magnetic Suspension Technology
26.09. - 28.09.2005, Dresden, Germany

W.-R. Canders, Hardo May, J. Hoffmann:
Contactless Magnetic Bearings for Flywheel Energy Strorage Systems
ISMST 2005, 8th International Symposium on Magnetic Suspension Technology
26.09. - 28.09.2005, Dresden, Germany

P. Kummeth, W. Nick, H.-W. Neumueller, H. Walter, J. Bock, Ch. Frohne, K. Schippl, Hardo May, W.-R. Canders:
Heavy Load Superconducting Bearing for a 4 MVA HTS Generator
ISMST 2005, 8th International Symposium on Magnetic Suspension Technology
26.09. - 28.09.2005, Dresden, Germany

G. Fuchs, G. Krabees, P. Verges, W.-R. Canders, Hardo May:
Superconducting Magnetic Bearings for Rotating Machines
ISMST 2005, 8th International Symposium on Magnetic Suspension Technology
26.09. - 28.09.2005, Dresden, Germany

W.-R. Canders:
Vergleichsstudie bringt es an´s Licht - Entwicklung eines optimierten High Torque Antriebes
antriebstechnik, Heft 5, 2005, S.38-S.39, Vereinigte Fachverlage, Mainz

Hardo May, W.-R. Canders, J. Hoffmann, R. Palka, J. Bock, H. Walter:
Neue Möglichkeiten und Ergebnisse der Kraftaktivierung von Supraleitenden Magnetlagern für schnell rotierende Wellen mit begrenztem radialen Spiel
16.11. - 18.11.2005, Deutsche Kälte-Klima-Tagung, Würzburg, Germany

Publications 2004

W.-R. Canders, H. Wöhl-Bruhn, B. Rius-Sambeat:
Charakterisierung und gezielter Entwurf von Elektromotoren für Fahrzeugantriebe
2. Braunschweiger Symposium Hybridfahrzeuge und Energiemanagement
04.Feb.2004, Braunschweig, Germany

F. Hinrichsen, I. Koch, W.-R. Canders:
Current Source IGBT-Inverter for Low Inductive Synchronous Machines
PESC 2004, 35th Annual IEEE 2004, Power Electronic Specialists Conference
20.-25.June.2004, Aachen, Germany

W.-R. Canders, J. Hoffmann, Hardo May, R. Palka:
SMB Design based on advanced calculation methods validated by practical experience
ISMB 2004, 9th International Symposium on Magnetic Bearings
03.-06.Aug.2004, Lexington, USA

W.-R. Canders, H. Mosebach, Z. Shi:
Investigation of slotless permanent magnet excited linear synchronous machines with concentrated stator windings
ICEM 2004, 16th International Conference on Electical Machines
05.-08.Sept.2004, Cracow, Poland

M. Holub, R. Palka, W.-R. Canders:
Control of switched reluctance machines for flywheel energy storage applications
ICEM 2004, 16th International Conference on Electical Machines
05.-08.Sept.2004, Cracow, Poland

J. Meins, F. Turki, R. Czainzki:
Contactless high power supply
UEES 2004, 6th International Conference on Unconventional Electomechanical an Electrical Systems
24.-29.Sept.2004, Alushta, Ukraine

S.O. Siems, Hardo May, W.-R. Canders:
Experimental investigation of linear and rotatory HTSC bearings for industrial applications
ISEM 03, International Journal of Applied Electromagnetics and Mechanics, S.199 - S.202, Volume 19, Numbers 1-4 / 2004
2004, Versailles, France

S.O. Siems, W.-R. Canders, H. Walter, J. Bock:
Superconducting magnetic bearings for a 2 MW/10 kWh class energy storage flywheel system
Superconductor Science and Technology, 17/2004, S.229 - S.233
19 March 2004, Institute of Physics Publishing, UK

S.O. Siems, W.-R. Canders:
Advances in the design of superconducting magnetic bearings for static and dynamic applications
Superconductor Science and Technology, 18/2005, S.86 - S.89

K. Woronowicz, R. Palka:
Optimized thrust control of linear induction motors by a compensation approach
International Journal of Applied Electomagnetics and Mechanics, Volume 19, 2004, S.533-S.536, IOS Press

Hardo May, R. Palka, E. Portabella, W.-R. Canders:
Evaluation of the magnetic field high temperature superconductor interactions
COMPEL, Volume 23 No.1, 2004, ISSN 0332-1649

Publications 2003

S.O. Siems, Hardo May, W.-R. Canders:
Energiesparende Schwungmassenspeicher mit HTSL-Magnetlager für den dezentralen Einsatz
Tagungsband 8. Statusseminar für Supraleitung und Tieftemperaturtechnik
13.,14. Feb. 2003, Garmisch-Partenkirchen, Deutschland

S.O. Siems, Hardo May, W.-R. Canders, M. Leonard:
Rotierende HTSL-Lager für Turbomaschinen
Tagungsband 8. Statusseminar für Supraleitung und Tieftemperaturtechnik
13.,14. Feb. 2003, Garmisch-Partenkirchen, Deutschland

S.O.Siems, Hardo May, W.-R. Canders:
Experimental investigation of linear and rotatory magnetic bearings with HTSC
ISEM, 11th Int. Symp. on Appl. Electromagnetics and Mechanics
12.-14. May 2003, Versailles, France

Hardo May, R. Palka, W.-R. Canders:
Performance enhancements of electrical machines by the use of new HTSC-material
ISTET 03
6.-9. Jul 2003, Warsaw, Poland

R. Palka, Hardo May, W.-R. Canders:
Three-dimensional identification of the subdomains positions within the HTSC bulks
ISTET 03
6.-9. Jul 2003, Warsaw, Poland

F. Hinrichsen, G. Tareilus, W.-R. Canders:
1MVA-ARCPI with high voltage IGBT Modules- Design and practical experience
EPE2003,10th Int. Conference on Power Electronics and Applications
2.-4. Sept. 2003, Toulouse, France

W.-R. Canders, H. Mosebach, Z. Shi:
Analytical and numerical investigation of PM-excited linear synchronous machines with shaped magnets
LDIA2003, 4th Int. Symposium on Linear Drives for Industry Applications
8.-10. Sept. 2003, Birmingham, UK

S.O. Siems, W.-R. Canders:
Advances in the design of superconducting magnetic bearings for static and dynamic applications
EUCAS, 6th European Conference on Applied Superconductivity
14.-18. Sept. 2003, Sorrento, Italy

W.-R. Canders, F. Laube, S.O. Siems, G. Tareilus:
Dynastore - A Flywheel Energy Storage System for Power Quality Applications in the 10 kWh Class
Proc. EESAT 03, Electric Energy Storage, Applications and Technology
27.-29. Oct 2003, San Francisco, Cal, USA

H. Mosebach, W.-R. Canders:
Simple two dimensional analytical model for induction machines with a very large air gap
Electromotion 2003
26.-28. Nov. 2003, Marrakesch, Marocco

Hardo May, W.-R. Canders, R. Palka:
Grundlagenuntersuchungen für die Auslegung supraleitender Magnetlager, Anwendungsbeispiele
Deutsche Kälte & Klima Tagung 2003
20.-21. Nov. 2003, Bonn, Deutschland

Publications 2002

W.-R. Canders, F. Laube, H. Mosebach, J. Schacht
Neue Elektromotoren für kleine Haupt- und Hilfsantriebe
Tagungsband des Sprechtags der Schiffsbautechnischen Gesellschaft
8. April 2002, Hamburg

G. Tareilus, F. Hinrichsen, W.-R. Canders
Simple design and control of ARCP-inverter for universal power range
SPEEDAM`2002, Symposium on Power Electronics, Electrical Drives, Automation & Motion
11.-14. June 2002, Ravello, Italy

W.-R. Canders, F. Laube, H. Mosebach
PM Excited polyphase synchronous machines with single phase segments featuring simple toth coils
ICEM 2002, Int. Conference on Electrical Machines
25.-28. Aug. 2002, Bruges, Belgium

H. Mosebach, J. Reimer
Rotational speed sensor for servo drives based on eddy currents
ICEM 2002, Int. Conference on Electrical Machines
25.-28. Aug. 2002, Bruges, Belgium

F. Laube, W.-R. Canders
Compensation of unbalanced magnetic pull in switched reluctance machines using parallel pole windings
ICEM 2002, Int. Conference on Electrical Machines
25.-28. Aug. 2002, Bruges, Belgium

S.-O. Siems, Hardo May, W.-R. Canders
Levitation forces and stiffness of model arrangements of magnetic HTSC bearings
ISMB-8, 8th Int. Symposium on Magnetic Bearings
26.-28. Aug. 2002, Moto, Japan

R. Palka, Hardo May, W.-R. Canders
Quality examination of high temperature superconducting bulk material used in electrical machines
and magnetic bearings
OIPE 2002, VIIth International Workshop on Optimisation and Inverse Problems in Electromagnetism
12.-14. Sept. 2002, Lodz, Poland

R.K. Jardan, I. Nagy, W.-R. Canders, T. Ruzsanyi, D. Bereknyei
Utilisation of reneable and waste energy by turbine-generator system in disperse power plants
PEMC 2002
Sept. 2002, Dubrovnik, Croatia

H. Walter, S. Arsac, J. Bock, S.-O. Siems, W.-R. Canders, A. Leenders, H. C. Freyhardt, H. Fieseler, M. Kesten
Liquid hydrogen tank with cylindrical superconducting bearing for automotive application
ASC 2002, Applied superconductivity
Publ. IEEE Trans.on.appl. superconductivity, 3. Vol. June 2003

Publications 2001

W.-R. Canders, F. Laube, H. Mosebach
Permanent magnet excited synchronous machine with reduced armature reaction and a simple stator winding
Electromotion 01, 4th Int. Symposium on Advanced Electromechanical Motion Systems
19.-20. June 2001, Bologna, Italy

W.-R. Canders, J. Heldt, R.K. Jardan, I. Nagy, H.J. Prümper
Application of a novel 400 KW natural gas expansion system as a UPS System
EPE`01, 9th European Conference on Power Electronics and Applications
27.-29. Aug. 2001, Graz, Austria

K. Woronowicz, R. Palka
A new linear induction motor control approach using the compensation of it's parameters method
ISEF`01, X Int. Symposium on Electromagnetic Fields in Electrical Engineering
20.-22. Sept. 2001, Crakow, Poland

Hardo May, R. Palka, W.-R. Canders
Non harmonic feeding of induction machines and optimized current control for dynamic torque variation
ISEF`01, X Int. Symposium on Electromagnetic Fields in Electrical Engineering
20.-22. Sept. 2001, Crakow, Poland

Hardo May, W.-R. Canders, R. Palka, M. Holub
Optimized firing of inverter fed switched reluctance machines for high speed and high power
ISEF`01, X Int. Symposium on Electromagnetic Fields in Electrical Engineering
20.-22. Sept. 2001, Crakow, Poland

W.-R. Canders, F. Laube, H. Mosebach
High thrust double sided permanent magnet excited linear synchronous machine with shifted stators
LDIA`01, 3rd Int. Symposium on Linear Drives for Industry Applications
17.-19. Oct. 2001, Negano, Japan

S.-O. Siems, J. Meins, C. Deeg, H. Mosebach
High thrust permanent magnet excited linear synchronous drive for mass acceleration
LDIA`01, 3rd Int. Symposium on Linear Drives for Industry Applications
17.-19. Oct. 2001, Negano, Japan

Publications 2000

S.-O. Siems, Hardo May, E. Portabella, W.-R. Canders
Application of HTSC - bearings for highspeed machines
ISMB-7, 7th Int. Symposium on Magnetic Bearings
23.-25. Aug. 2000, Zürich, Switzerland

W.-L. Lee, W.-R. Canders, W. Schumacher
New approaches for magnetic bearings in rotating machines
ISMB-7, 7th Int. Symposium on Magnetic Bearings
23.-25. Aug. 2000, Zürich, Switzerland

E. Portabella, R. Palka, Hardo May, W.-R. Canders
Static and dynamic model of a HTSC axial bearing
ISMB-7, 7th Int. Symposium on Magnetic Bearings
23.-25. Aug. 2000, Zürich, Switzerland

W.-R. Canders, A. Lange, F. Laube, H. Mosebach
Comparison of different drive systems for a 75 kW electrical vehicle drive
ICEM`00, Int. Conference on Electrical Machines
28.-30. Aug. 2000, Espoo, Finnland

W.-R. Canders, A. Lange, H. Mosebach
Investigation of iron losses of soft magnetic powder components for electrical machines
ICEM`00, Int. Conference on Electrical Machines
28.-30. Aug. 2000, Espoo, Finnland

W.-R. Canders, Hardo May, R. Palka, E. Portabella
Machines with high temperature superconducting bulk material in comparison with
permanent magnet excited synchronous machines
ICEM`00, Int. Conference on Electrical Machines
28.-30. Aug. 2000, Espoo, Finnland

R. Palka, Hardo May, E. Portabella, W.-R. Canders
Calculation of the properties of electrical machines with high temperature superconducting bulk material
ECCOMAS 2000, European Congress on Computational Methods in Applied Sciences and Engineering
11.-14. Sept. 2000, Barcelona, Spain

Publications 1999

W.-R. Canders
Schwungradenergiespeicher - Projekt "Dynastore"
Jahrestagung der DPG
25. März 1999, Münster

W.-R. Canders
Getriebelose elektrische Antriebe für verkehrstechnische und industrielle Anwendungen
Zuckerindustrie 124 (1999) Nr.1, Vortrag auf der Hauptversammlung des VDZ
12. Mai 1999, Kassel

W.-R. Canders
Superconducting bearings for a flywheel energy storage
Power SCENET, Working Group "HTS rotating machines"
21.-22. July 1999, Jena / Wolfersdorf

R. Palka, E. Portabella, Hardo May, W.-R. Canders
Axis symmetric finite elements analysis of the permanent magnet-superconductor interaction
Proc. ISTET`99, "X International Symposium on Theoretical Electrical Engineering"
6.-9. Sept. 1999, Magdeburg, Germany

J. Bock, M. Baecker, G. Brommer, L. Cowey, M. Kesten, H. Fieseler, W.-R. Canders, Hardo May, H.C.Freyhardt, A.Leenders
Levitated liquid hydrogen cryotank for automotive application
Proc. EUCAS`99, "4th European Conference on Applied Superconductivity"
14.-17. Sept. 1999, Sitges, Spain

E. Portabella, R. Palka, Hardo May, W.-R. Canders
Stability of magnetic HTSC bearings under axial vibrations
Proc. EUCAS`99, "4th European Conference on Applied Superconductivity"
14.-17. Sept. 1999, Sitges, Spain

E. Portabella, R. Palka, Hardo May, W.-R. Canders
Influence of vibrations in HTSC-PM bearings: Computation and Experiments
Proc. ISEF`99, "International Symposium on Electromagnetic Fields in Electrical Engineering"
23.-25. Sept. 1999, Pavia, Italy

H. Mosebach
Neue elektrische Maschinen hoher Kraftdichte für Fahrzeugantriebe
Seminar "Elektrische Antriebe in der Fahrzeugtechnik"
5.-6. Okt. 1999, Haus der Technik e.V., Essen

W.-R. Canders
Studie Technologien und Grenzen von "High Torque" Antrieben - Abschlußbericht
FVA Forschungsreport 1999, FVA - Info Tagung
2.-3. Nov. 1999, Würzburg

W.-R. Canders
Aluminium in elektrischen Antrieben
Seminar "Aluminium in der Elektrotechnik"
9. Nov. 1999, Haus der Metalle, Düsseldorf

Hardo May, S.-O. Siems, E. Portabella, R. Palka, W.-R. Canders
Supraleitende Lager für Flüssigwasserstofftanks
Dresdner Kolloquium "Kühltechnik für elektronische und supraleitende Bauelemente"
26. Nov. 1999, ILK Dresden

W.-R. Canders, F. Laube, H. Mosebach
Studie "Hight Torque" Antriebe - Technologien und Grenzen
Abschlußbericht zum FVA Forschungsvorhaben Nr.352
Forschungsvereinigung Antriebstechnik e.V., Heft 586, 1999

Publications 1998

W.-R. Canders, E. Huth, H. Mosebach
Linear Motor Transfer Technology (LMTT) for container terminals
Proc. LDIA`98, The Second Int. Symposium on Linear Drives for Industry Application
8.-10. April 1998, Tokyo, Japan

W.-R. Canders, H. Mosebach
Average thrust of permanent magnet excited linear synchronous motors for different stator current waveforms
Proc. ICEM`98, Int. Conference on Electrical Machines
2.-4. Sept. 1998, Istanbul, Turkey

W.-R. Canders
High speed machines on magnetic bearings - Design concepts and power limits
Proc. ICEM`98, Int. Conference on Electrical Machines
2.-4. Sept. 1998, Istanbul, Turkey

W.-R. Canders, Hardo May, R. Palka
Loss reduction in synchronous machines by appropriate feeding patterns
Proc. ICEM`98, Int. Conference on Electrical Machines
2.-4. Sept. 1998, Istanbul, Turkey

S. Gauss, J.H. Albering, J. Bock, Hardo May, W.-R. Canders, M. Kesten, H. Fieseler, H.C. Freyhardt, M. Ullrich
Cryotank with superconducting, magnetic suspension of the interior tank
Proc. ASC`98, Applied Superconductivity Conference
13.-18. Sept. 1998, Marriots Desert Spring Resort, Palm Desert, California, USA

A. Leenders, M. Ullrich, H.C. Freyhardt, M. Kesten, H. Fieseler, W.-R. Canders, Hardo May, H. Weh, S. Gauss, J. Bock
Successfull Application of HTS Monoliths in a Cryogenic Vessel
Proc. ASC`98, Applied Superconductivity Conference
13.-18. Sept. 1998, Marriots Desert Spring Resort, Palm Desert, California, USA

W.-R. Canders
Studie Technologien und Grenzen von "High Torque" Antrieben - Zwischenbericht
FVA Forschungsreport 1998, FVA - Info Tagung
3.-4. Nov. 1998, Würzburg

W.-R. Canders, Hardo May, R. Palka
Topology and performance of superconducting magnetic bearings
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering
Vol.17, No.5/6, 1998, pp.628-634

H. Mosebach
Einfache analytische Rechenmodelle für permanentmagneterregte Synchronmaschinen
Electrical Engineering, 81 (1998), S.171-176
Springer Verlag, 1998

W.-R. Canders, H. Mosebach
Linearantriebstechnik als Bindeglied im intermodalen Güterverkehr
"Beiträge aus dem Zentrum für Verkehr der Technischen Universität Braunschweig" Schriftenreihe H.60
Herausgeber: J. Pachl, Institut für Eisenbahnwesen und Verkehrssicherung, TU Brauschweig, 1998

Publications 1997

[Translate to English:]

W.-R. Canders, H. Mosebach
Comparison of permanent magnet excited high speed synchronous machines with internal and external rotor
ISEM`97, Int. Symposium on Non Linear Electromagnetics
12.-14. May 1997, Braunschweig, Germany

W.-R. Canders, Hardo May, R. Palka
Current distribution within HTSC´s and its identification by field measurements
ISEM`97, Int. Symposium on Non Linear Electromagnetics
12.-14. May 1997, Braunschweig, Germany

W.-R. Canders, Hardo May, R. Palka
High speed rotating HTSC magnetic bearing of new topology
ISEM`97, Int. Symposium on Non Linear Electromagnetics
12.-14. May 1997, Braunschweig, Germany

W.-R. Canders, Hardo May, R. Palka
Identification of the current density distribution of monolithic superconductors
ISTET`97, IX Int. Symposium on Theoretical Electrical Engineering
9.-11. June 1997, Palermo, Italy

W.-R. Canders, Hardo May, R. Palka
Topology and performance of superconducting magnetic bearings
ISTET`97, IX Int. Symposium on Theoretical Electrical Engineering
9.-11. June 1997, Palermo, Italy

W.-R. Canders, W.-L. Lee
Integrated radial and axial low cost magnetic bearing
Proc, MAG`97, Magnetic Bearings Industrial Conference
19.-22. Aug. 1997, Alexandria, VA, USA

Hardo May, R. Palka
HTS Anwendungen in der Energietechnik
Institut für Metallphysik, Univ. Göttingen, Metallphysikalisches Seminar WS 97/98
Göttingen 1997